They are amazing the the hydraulics make them even more consistent. Just amazing

@TheSimCircuit

Ай бұрын

Yes amazing pedals these, I am busy testing the hydraulic throttle then will make quick video about all the addons for the p1000’s 🙌🏻

Thanks! I am waiting this review! 🙌👍

It's good information your putting out there my guy! I do plan on getting the inverted pedal rack, with the hydraulics, thing but did not no I need the one with the i at the end. so thank you.

@TheSimCircuit

17 күн бұрын

Thank you for watching matey it’s much appreciated 🙌🏻

I keep seeing all of.this talk about the throttle and changing the spring. It's not necessary. The throttle preload is adjustable and you can make the black spring uncomfortably stiff just by adding preload. I also took apart the throttle and added spacers to the shaft which brought the gas pedal in some. It soaked up some.odmthe excess travel and made it so you can adjust the pedal position in relation to the brake for easier heal/toe. But anyway, if you guys just want a stiffer pedal. Add preload. Loosen jam nut, spin the main shaft clockwise until the pedal is stiff enough, re tighten jam nut. Maybe I'll do a video on the spacer mod showing what I did and explaining it more

@TheSimCircuit

7 ай бұрын

Seen someone on FB group with washers to throttle to assist with heel & toeing might have been yourself. I personally like the blue spring feels nice

@charlesgutscher1923

7 ай бұрын

@@TheSimCircuit yes sir that was me. I'm sure the blue screen feels great. Was just stating that, especially for those that don't want to pull it apart or don't have the extra springs, you can just add preload without disassembling anything to create a much stiffer throttle. Great videos btw!

@DonsShed

5 ай бұрын

Thanks for your video Charles...... lots of good info in it :)

Yes - blind test will be best = because when you trail braking you mostly check the entry not the % of braking on your sim + I prefer racing for the full immersion with true displays = good to know that it is fixed now. Makes my decision between the Sim-Lab XP1 vs Simagic P1000 more difficult ! Most likely I will go for Sim-Lab XP1 + custom a DIY haptic for the brake

I have what must be an early batch P1000's (I later added the hydraulic break) and when I register my breaking input at say 80% it stays there with 0% fluctuation. I find the stock throttle feel ok. I tried all the clutch springs (like you say, a total pain the arse to change) but found them all a bit too stiff for my liking, so just reverted to stock. If Simagic were to offer the adjustable loadcell throttle from the P2000's as an upgrade for the P1000's though I'd buy it without hesitation (hope you're listening Simagic 😉)

But it's a bit strange that Simagic include those extra aluminium spacers for the elastomer stack with the hydraulic system,. wouldn't it help with the loadcell backdrop when using 1 or 2 in the loadcell stack?.. also there is this guy on yt that solved that problem with the usage of a spring, he also made a fanatec demper on the trotthle incl 3d printed parts to make it fit. Does the haptic shaker deliver good results at low settings without making my neighbors mad?

@TheSimCircuit

6 ай бұрын

Was using all 3 aluminium spacers makes pedal shorter & stiffer as for dropoff it did not make a much of a difference compared to using all softer elastomers 🤷🏼‍♂️ I also would have thought that going much stiffer would have much less drop of but the difference is less than 2% from what I can see. That could also be me not holding pressure 100% the same so keep that in mind. Don’t worry about noise I do not think these will bother your neighbours, certainly could bother someone is same room or next room if loud. I run mine at 25% and don’t have the need to run higher, you can also change the frequency this also makes big difference in sound and how shakers feel. But I suggest unless you can go active pedals then 100% buy some shakers 😉

Yesssss!!!

Thanks for the videos 😊I am interested in buying these P1000 Pedals (and getting into the Simagic Universe for my first Sim Rig that I'm going to build soon)..... my question is, Fanatec V3's are $580AUD incl. Brake Performance Kit, these are $1000AUD..... are the P1000's THAT much better than V3's? and are they worth the potential Brake Pedal bleed off hassle? Cheers Don, Perth W.Australia (Dons Shed and Xplor Overland)

@TheSimCircuit

5 ай бұрын

Hey matey one thing I can say is the fanatec v3 pedals I used for 2 years myself and are good pedals however you can’t compare them to the p1000. If your budget allows 100% go with the p1000’s would be my advice. The brake issue is a thing of the past now simagic have sorted that but also I have been testing a accessory kit with 5 different springs that simagic is about to release and it has made the p1000 even better I believe. Also the p1000 you can upgrade as time goes on you don’t have to buy everything at once. Last bit of advice unless you are 100% sure you are going to be using the clutch on the regular for say drifting I would just buy the 2 pedal version and put the extra towards a shaker or something. Hopefully this helps

@DonsShed

5 ай бұрын

@@TheSimCircuitthanks very much for your reply..... sorry though, I forgot to mention, that I will be buying my new rig/Simagic setup for use solely with Playstation 5 only (I don't plan on getting into PC Racing). Sigma Cortex converters allow the use of Simagic gear to PS5, so that CAN be done, but I hear/read that it dulls the capability of the Simagic gear down to a basic G29 type level of use (not sure how true that is?) .... is it still worth it to get Simagic over Fanatec? Thanks in advance :)

@TheSimCircuit

5 ай бұрын

@@DonsShed if you are only going to be playing on PS5 then simagic is overkill plus be headache making things work rather just stick with products that support ps5. Also the shakers that you can buy extra for pedals won’t work on unless on pc i believe

How did you get the replacement circuit board? Is this something they fixing for all sets?

@TheSimCircuit

7 ай бұрын

What SiMagic told me is that a very small amount of pedals that was from the initial batch had this problem. However small amount could be 100 to 10000 im not sure. If you are having trouble with the brake drop off like I had in my first video then I suggest you contact the people you bought pedals from or SiMagic themselves. SiMagic sent me the circuit boards after they seen my first video I did not contact them first they actually contacted me so how the process works I do not know sorry.

@TheSimCircuit

7 ай бұрын

All pedals now should not have this problem like said it was from first batch and according to SimMagic they have upped their quality checks and I have been told this is not an issue anymore. So when buying these now they will come with the new boards. Hope this helps

would be interested to see a blind test, where you try to hit 80% and stay at it without looking at the screen, would be interested to see if it was the same result

@TheSimCircuit

7 ай бұрын

Probably not matey, even in sim I drive with my inputs just above my dash. So it’s something I always use as a reference.

Thanks for the review. Now can you please refer to the Invicta pedals, do a comparison of how you feel on the Hydraulic brake and if you can set them as hard with a short stroke as on the Invicta. Are the P1000 better than the Invicta?

@TheSimCircuit

7 ай бұрын

I will put these on their stiffest configuration tonight & let you know. Be about 5-6 hours from now ok 👍🏻

7 ай бұрын

@@TheSimCircuit what are your thoughts now of a p1000 (hydraulics upgrade and /w haptic) vs p2000 (/w haptics)?

@TheSimCircuit

7 ай бұрын

Tried the the p1000 on hardest setting 6 red elastomers and 3 aluminium rings. The p1000 is not as hard as invictas and still slight spunge to them where invicta is like 2-3cm travel & solid not spongy like a traditional brake pedal. I took short video on my phone if you want to see it message my Facebook page and il send to you sure 👌

@TheSimCircuit

7 ай бұрын

Honestly mate I’m not the person to ask my experience with the p2000 was like 10 min at a expo and they did not have the haptic feedback. So between the p1000 & p2000 I cant give you reliable information sorry. What I can say is now that brakes are working I am absolutely loving the p1000 they are a cracking set of pedals 100%

@magil159

Ай бұрын

@@TheSimCircuit so what is your opinion - Invicta or P1000?? I am now struggling and need an advice.

What is your rubber bushings combination for the brake in this video? Is it all blacks?

@TheSimCircuit

2 ай бұрын

I can’t remember 100% matey but it was not black. If I remember correctly it was 3 red 3 blue & 3 grey. That was roughly my goto configuration before starting to use springs elastomer combo.

Would you recommend these over the invictas you reviewed?

@TheSimCircuit

4 ай бұрын

Honestly mate it’s two different pedals in way they were designed so actually hard to give answers. But what I would say is if you generally use allot of force on the brakes then go invictas but if you prefer more of a traditional brake feel then go p1000. If you also want to replicate the feeling of a real race cars brakes then go invictas. Both are excellent if I was only able to pick one I would pick the p1000’s but this decision is heavily impacted by the fact I have an injury on my left knee so to use the 2 phase braking on the invictas I need to put more force than what I want on my knee 🤦🏼‍♂️

Can you show us the old and new circuit board, so we can be sure we get a version of the properly working one?

@TheSimCircuit

4 ай бұрын

Hey 👋🏼 cant show sorry I actually dot have the old circuits anymore, but what I can tell you is that the first batch of circuit boards were dated mid June 2023 & I believe that those were the ones from the first batch. SiMagic told me only a small batch from the initial release were affected. Do you have a big drop in brake pressure?

@MrDanesorensen

4 ай бұрын

@TheSimCircuit hey, thanks so much for responding. No, actually, I'm looking to get into sim racing for the first time since I always loved Karting so much as a kid. Never used one before, but thinking of going with these pedals and haptics (maybe hydrolic setup), the simagic alpha mini, and the neo wheel rim. Is that the highest quality components I can do for the price range? Still have to learn more about what rig makes sense. Am yet to start that part of my research. Hoping to find a good value for the money :)

@TheSimCircuit

4 ай бұрын

Mate the GT Neo best wheel on market for price 100% I have one here. I can’t say about the SiMagic base as I have never used one but heard good things. The issue with brakes are fixed now so when you get your p1000 they will work perfect 🤩 Will be a very good first setup 🙌🏻

Is there away to get the pedal not to go past a curtain percentage. It like works backwards when you bring the max percentage down. In iracing if I bring the travel percent down to 80% the brake travel goes further on the screen looking at the inputs? I thought it would work similar to Heusinkveld SmartControl. Maybe it does, but not a lot of info on the software. Thanks for the video

@TheSimCircuit

7 ай бұрын

I am not sure matey but I will have a look later for you, give me couple of hours have few things I need to do first 👍🏻

@logo8009

7 ай бұрын

Thanks. @@TheSimCircuit

@TheSimCircuit

6 ай бұрын

Sorry for late reply matey. I could not get it to work but I know exactly what u mean. What I can suggest is when you calibrate your pedals push down allot harder than what you would normally that way in sim you should not exceed 80% without really pushing hard onto your brake

@logo8009

6 ай бұрын

Yes, I have done that,but the pedals should be able to do it. As they have a slider. A little disappointed in their software, but love the feeling of the operation. I ended up going in the ini app car setting file and adjusting the over all travel in the Sim. Thanks @@TheSimCircuit

Hi do you have a photo of these circuit boards or a name so we can compare?

@TheSimCircuit

7 ай бұрын

I do have photo but not something I can share sorry, what I can say is the date on board for my old one was June 2023 and new one was October 2023. But you will know just by doing a brake test and if dropping off more than 15% then chances are u got one of the first batches. My dropped 20+ % so it was fairly obvious to spot.

Are there any videos on how to get the haptics working in iracing?

@TheSimCircuit

5 ай бұрын

I don’t have video on that but should be easy. Remember the haptics on throttle will only work via simhub. Let me know if you are still struggling, I will send you a video of my settings on Facebook 👍🏻

@Srt4drvr89

5 ай бұрын

I did get them working. I feel like simagic should say they have to work via sim hub for iracing.

@TheSimCircuit

5 ай бұрын

@@Srt4drvr89 glad you got working 👍🏻 whenever you can use simhub I would suggest do, simhub are normally better than the actual software the sim manufactures provide with their own products lol

Now this is what I wanna see 🎉

Good to know it isnt a wide spread issuue

@TheSimCircuit

3 ай бұрын

Yes was only the initial batch of p1000’s so very limited amount of pedals were affected 🙌🏻

Just replace the urethane with a spring :-). Called a 'Die spring'.

A question, on iracing you calibrate the pedal to 80% or 100%, here in the video you only do the test at 80%. Instead on sim pro calibrate the brake to 100 then reduce the load cell to 80

@TheSimCircuit

5 ай бұрын

In game calibrated to 100 but it is very rare you would ever brake 100 that’s why I brake to 80 in the video to keep it as close to the force most people would use in the sim.

@zazadj1

5 ай бұрын

@@TheSimCircuit But how do I know if the board that mounts my pedalboard is new? Or do you know if they have made an update in recent models.

@TheSimCircuit

5 ай бұрын

@@zazadj1 only a very small amount of pedals from the initial first batch of pedals had this problem and this issue has been resolved. All pedals now come with updated boards. This information is from SiMagic themselves and I do believe it to be true because I don’t see any more post regarding this issue even on Facebook pages and it use to be a daily thing for someone to bring it up. Also I know they are bringing an accessory box to the market for the p1000 with 10 springs (5 different strengths) that you will be able to put spring/elastomer combo this will just make the pedals even more accurate but I will put that to the test in a later video with the new hydraulic throttle 👍🏻

@zazadj1

5 ай бұрын

I bought mine in September how do I know if it fits in those with the new cards

@TheSimCircuit

5 ай бұрын

@@zazadj1doubt In September you would have problems, does your brake do what mine did in my first video? The date on my old circuit board was 17/06/2023 I believe those are the boards from preorders if your board the one where it plugged in to power is dated later you should have the updated boards is my understanding 👍🏻

Be interested to see you do a VR video

@TheSimCircuit

4 ай бұрын

VR yea maybe get them new Apple goggles 🥽 for the sim rig 😂

Just ordered P1000i, with hydraulics and haptics. I guess will have the same problem:/ BTW, thery cost over 1400$ in Europe.

@TheSimCircuit

5 ай бұрын

No don’t sweat you have made a good purchase it was only a small batch from the original release of stock I have been told had the brake issues. If you bought the p1000 recently they will be good but mine was not that expensive where you from if I might ask? You buying from a local sim dealer?

@juccavtr

5 ай бұрын

@@TheSimCircuit thx for answer. Yes, ordered it yesterday. From Belgium, SimWear. Shipping was cheap. 30€ to Croatia. Cheapest what I found in stock in Europe. With 2 haptics, inverted, and hydraulics.

I have P1000s' with the original circuit boards and now hydraulic kit. This would be a nice free fix if you've already dropped almost $3k on Simagic equipment -_-

@TheSimCircuit

6 ай бұрын

Money dropped and long gone but Money well spent now 😜

@chrisc3825

6 ай бұрын

@@TheSimCircuit lol agreed. I commented in the Discord and reached out to my retailer and haven't gotten anything useful yet regarding these new boards. They may not have these publicly available yet would be my guess.

Damm u!!! You lost a subscriber just now after seeing you wear that dirty red bull racing top!!! Hehe only kidding. Fanastic video as always and you should have much much more susbcribers!!! Is that a p1x that you use? How is it? Does it take up a lot of room? Are your floors solid concrete ?

@TheSimCircuit

7 ай бұрын

😂😂 got other shirts also just not a Mercedes one 😘 Yes I am using a P1x great rig don’t think I will be changing for a long time might just buy the integrated monitor stand later 🤔 It does take up allot of room and it’s not something you move about as it’s heavy af. If not using triple monitor you can save some space but not loads. My floors are carpets and under them wood boards so sound is something you need to think about but my wife sleeps in room just below and has never complained about noise unless im using the butkickker

2:24 I watch the whole video anyway, but for those who want to skip around, can you put those timestamps as chapters in the video?

@TheSimCircuit

7 ай бұрын

It’s something that I can only do myself when I get to a thousand subs. At this moment I am not able to do chapters sorry

Your problem is you leave it on loadcell force when it should be on angle setting In simagic software

@TheSimCircuit

4 ай бұрын

I do realise I can use angle sensor but why pay so much for load cell pedals if you can’t use 🤷🏼‍♂️ but happy to report all brake issues has now been resolved 🙌🏻

Just watched this to fix throttle pedal stiffness and throw.. it literally takes 10 seconds - kzread.info/dash/bejne/mKmB0ceqo5qZn7w.html

@TheSimCircuit

6 ай бұрын

Hey matey thanks for the comment, yes can adjust preload to make the pedal stiffer before the pedal travels but once you push down on the pedal & the pedal is in motion it’s the spring that provides the resistance not the preload. I might be interpreting it wrong but I played around with all the bolts on my p1000 including the preload. SiMagic are now shipping these pedals with a stiffer spring in the box not sure they would do that if it could be done without the spring 🤷🏼‍♂️ I also realised wile buying the extra stiff throttle spring for my Asetek pedals that what I consider stiff others think it’s just ok cause I could not use the extra stiff spring (too stiff) others thought it was perfect. So the stiffness of the pedal will be something to each persons taste 👅 for me the p1000 throttle needed that bit more 👍🏻