It would Have been perfect if it have bottom fans intake? Then u can set the aio as exhuast as it get fresh air from the bottom I highly recomend to add bottom fan intake

@Silverstonetech

5 күн бұрын

No, we've extensively tested ventilation patterns to come up with the current design. Sometimes opening up more ventilation isn't always the best for overall case cooling!

I wish they would make a longer version of the sg13. That case is almost perfect but it can't fit a 4090 or 7900 xtx

@Silverstonetech

2 ай бұрын

If you feel SUGO 17 is a little too big, then please consider the SUGO 14, which is smaller than the SUGO 17 but still fits most 4090 cards: www.silverstonetek.com/en/product/info/computer-chassis/SUGO14/

@omizoKa

Ай бұрын

@@Silverstonetech I'm planning to fit 2x240mm Radiator on it. ( SUGO 14 )

Why no reviews anywhere? Did Silverstone forget to send out samples?

@Silverstonetech

3 ай бұрын

We have started sending out samples to reviewers as we didn't want to send pre-production samples. Please also keep in mind that some reviewers will decline our review sample offer if they don't find this product interesting to them or they think their audience aren't interested in it. So if you like to see your favorite reviewers check out this case, best to let them know about it directly!

I hope we see an SG13 V2 at some point, it really needs an update.

@Silverstonetech

Ай бұрын

Internally, we have actually updated the SG13 now up to V3.1! But most of these updates do not affect how the case can be used or perform, they are mostly production and quality improvements. If you find SG13 lacking, we would suggest taking a look at our SUGO 16 instead as this case was designed to eventually succeed SG13 with it similar overall size and capability: www.silverstonetek.com/en/product/info/computer-chassis/SUGO16/

I do wish you had gone with uniform ventilation on all sides for cleaner aesthetics. More ventilation can also assist AIO cooling when sent to exhaust.

@Silverstonetech

3 ай бұрын

We've extensively tested ventilation patterns to come up with the current design. Sometimes opening up more ventilation isn't always the best!

@L91

3 ай бұрын

@Silverstonetech If you took that partially ventilated right side panel off. Would cooling be worse?

@OuTaHsien

3 ай бұрын

@@L91 Yes, if you have a hot GPU, its exhausted air would get sucked back into the lower CPU area.

@L91

3 ай бұрын

@OuTaHsien that's will happen in most cases anyway, since most are flow through cooler designs nowadays. I've dealt with similar layout cases. SilverStone say they've tested it, so nm ig

Oh wow, you finally made a decent ITX case with a meaningful setup option. Took you a while

@Silverstonetech

23 күн бұрын

We are glad you like it!

I really like case in general. Cleary see inspiration from C4-SFX. But isn't PSU exhaust shoot towards solid front panel or am I missing something?

@Silverstonetech

Ай бұрын

If you check out SUGO 17's product page, you'll see there vents on the right side of the front panel to allow for PSU to exhaust air on that side: www.silverstonetek.com/en/product/info/computer-chassis/sugo_17/

it looks like it should...but just wanna ask. does this fit a 4090 strix?

@Silverstonetech

3 ай бұрын

The SUGO 17 will fit any graphics cards up to 400mm. The ROG Strix GeForce RTX 4090 is "only" 358mm long according to ASUS, so yes, it'll fit easily!

is there enough room to populate teh fourth slot while still having fans at the top? From the view at 0:44 it looks like it might be a little too small for that (unless those are thicker-than-normal fans).

@Silverstonetech

5 күн бұрын

You would need to use slim fans at the top. The fans we used in the video are standard 120mm x 25mm fans.

is the new liquid freezer 3 compaitble with this case?

@Silverstonetech

3 ай бұрын

For the side mount, there should be no issues, however, if you want to mount the radiator to the top of the case, there will be more limitations. Our manual details these limitation starting on page 32: www.silverstonetek.com/upload/downloads/Manual/case/Multi-SUGO17-Manual.pdf

I wish you'd made an updated FT03 mini that could fit modern GPUs. That design was brilliant and actually SFF, unlike Phanteks Shift X and CM NCore 100

@Silverstonetech

2 ай бұрын

In order to fit modern GPUs, a case layout like the FT03-MINI would have to grow bigger, there's really no way around it unless you sacrifice other aspects of the case such as CPU cooler support or resort to use of riser card/cable for PCIe slot. We did make a spirtiual sucessor to the FT03 / FT03-MINI with the ALTA G1M though that does fit modern GPUs comfortably (but no longer SFF). If you haven't seen it, please check it out: www.silverstonetek.com/en/product/info/computer-chassis/ALTAG1M/

Does it have space to fit a 3.5" hdd?

@Silverstonetech

2 ай бұрын

Yes, you can fit one to the bottom of the case. For detailed information on this case and to download its manual, please visit SUGO 17's product page on the manufacturer website: www.silverstonetek.com/en/product/info/computer-chassis/sugo_17/

my local distributor didn't update your product for long time, maybe because too little demand for your price range here on id

@Silverstonetech

Ай бұрын

We always try our best to convince our distributors to carry our new products, but they will make their own decisions based on their perceived demand for the local market. If you think their judgement is wrong and should import this product into your own country, please let them know about it directly. Often times users requests are more effective than ours!

When it will be available in India

@Silverstonetech

Ай бұрын

We have made this case available to order for our distributor in India. So if you haven't seen it there, they may have made the decision to not import it. We often times find local users to have more influence on a distributor's decision to import certain products. So if you want to see this case for sale in India, please contact our distributors and resellers there directly and let them know! www.silverstonetek.com/en/where-to-buy/c_india

Review plz

Where bottom fan intake? meh

@Silverstonetech

5 күн бұрын

We've extensively tested ventilation patterns to come up with the current design. Sometimes opening up more ventilation isn't always the best for overall case cooling!

Crappy 13th and 14th gen i9 and i7 CPUs. Build one with AMD CPU instead.

price and release date please

@Silverstonetech

3 ай бұрын

It was released in January / February 2024, retailing for $239.00 (black) and $249.99 (white). You can find it on Amazon: www.amazon.com/dp/B0CV9FCR7B

@bakakafka4428

3 ай бұрын

@@Silverstonetech It's listed nowhere here in the EU. Why is that?

@Silverstonetech

3 ай бұрын

@@bakakafka4428 Our European office only received their first shipment of SUGO 17 a couple of weeks ago so they should start showing up in EU stores later this month. You may also want to contact your local SilverStone resellers to see if they have plans on importing it to your country: www.silverstonetek.com/en/where-to-buy/

@bakakafka4428

3 ай бұрын

@@Silverstonetech Any stores you can mention in Netherlands, Belgium or Germany that will have stock soon?