Thanks for the great video! So glad to see it can be done without messing with the exhaust!

@operationoverhaul

Жыл бұрын

You are welcome. It is a little tight to do but if you take your time it is possible. Thanks for the view.

Thanks for the video man, just got done doing mine and it fixed the shutter problem. Your video very helpful to the T. 😊

@operationoverhaul

Жыл бұрын

You are welcome. If you need anything else feel free to ask.

Dang !! That fluid was original!!

Thanks so much sir!!

@operationoverhaul

11 ай бұрын

You are welcome and thank you for watching.

Alot of people are saying change the fluid to mobil 1 synthetic trans fluid and it usually fixed the shutter, superior solutions sells a thermostat bypass for the transmission so it doesn't run 198+ degrees. The heat is what's is killing the torque converter and the transmission. I'm doing the mobil 1 fluid and bypass this weekend and see what happens we got just a slight shutter so hopefully it all helps.

@operationoverhaul

Жыл бұрын

I know some people who have ran the bypass and it has helped a lot. Their temps stay a lot cooler. Let me know how the Mobil 1 works for you. I would not mind knowing how performs and what it does with the shutter.

@rangosservicestation

Жыл бұрын

How did the oil change go? Any noticeable difference afterwards regarding the shudder?

@GhostRider-sb3jy

Жыл бұрын

How’s that working out for you now?

@johnneset6422

Жыл бұрын

Mobil 1 update please?!

@supersport4309

Жыл бұрын

@@johnneset6422 Hey John, ​ I have 2x 2016 GMC Yukon Denalis and I did the superior solutions bypass and the Mobil LV fluid recommended by GM and I dropped about 40-45 degrees on both, I also had an occasional jerk while turning and that went away. I did two fluid changes, the first was a pan drop and about a week later I syphoned the fluid from the top using a fluid extractor and added as much as I removed both times. I added a trans dipstick to make life easier as I change trans fluid regularly. Hope this helps u out.

Good Job

@operationoverhaul

2 ай бұрын

Thank you, I appreciate the comment.

Thanks for the video. My Truck will go into drive or reverse when I first start it up but after a couple of minutes it won’t move when drive or reverse could changing the transmission oil fix this. It’s a 2016 Silverado with 84,000 miles and never had the transmission oil changed

@operationoverhaul

11 ай бұрын

It is a possibility. Could be something clogging the filter and causing it to loose suction of fluid.

That's exactly how I got my pan down..👍

@operationoverhaul

2 жыл бұрын

The service data says to take the exhaust loose but you do not have to. He has since rebuilt the transmission as it was pretty much gone.

@philllsxga.7737

2 жыл бұрын

@@operationoverhaul how stupid!! GM's used to be so easy to work on..

@operationoverhaul

2 жыл бұрын

@@philllsxga.7737 that's truth. Plus their quality has continuously gone down as well in my opinion

@philllsxga.7737

2 жыл бұрын

@@operationoverhaul yes it has! China JUNK! 60k for China JUNK! Over 100 years of manufacturing vehicle's and they still can not get it right!! But then again all of the brand's are garbage theses days...

@operationoverhaul

2 жыл бұрын

The only two brands as of right now that I would trust to build a decent car/truck is Toyota and Honda. Most of the other companies are having a variety of issues.

Simply chaninging the fluid wont fix it. 6l80s that have programmed in TCC slip will all eventually die. You need to turn off TC/slip using HP Tuners or similar software. Your trans may last longer with new fluid, but constantly slipping a clutch will eventually kill the TC and run clutch material through your trans. The good news is with the TCC set to not slip in the tune, even a worn TCC can last a very long time.

@operationoverhaul

8 ай бұрын

I wanted to program it out with my tuner but the customer did not want to do that. He eventually had the transmission rebuilt.

@lilmiket76

7 ай бұрын

I did the same thing and it helped mine a lot but still slips in 4-5 gear. Would that program help that or just replace the transmission?

@operationoverhaul

7 ай бұрын

@@lilmiket76 if it's still slipping and the fluid was dark like this one. I would probably do a replacement and tune it out.

@rniejx4219

7 ай бұрын

​@@lilmiket76 ​ At the bottom of this comment is a video with a really good guide. If you have good computer skills, follow this line for line. You would either have to buy a HP tuners module, or rent one. Zzp performance rents them out for $100 (Plus $100 in credits to unlock your truck, so you would be spending $200). If you arent comfortable with software you could ask any Ls engine tuner who uses HP tuners if they can do it. If you are in Michigan I could also do it. It will stop your slipping. Depending how much metal is in the pan, you may also want to replace the torque converter, but the video also has a really good guide to evaluate that. Either way it is proven to save transmissions that were very bad. kzread.info/dash/bejne/pZWblcprcbSYpbg.htmlsi=7d6HQvpTZXQR0wH5

I have a 2011 1500 and im unaware of any type of "shudder". Is this shudder common on my older style truck? Or just the 2014+

@operationoverhaul

11 ай бұрын

From my experience I have seen it in the 2011 model year but no where near as much as the 2014 and up years.

Added a drain plug to mine want drain it all but enough to remove pan with out a mess. Second service sence I bought it used pans clean as a penny. The first change was a bit dirty but want bad either has about 97,000 on the clock

@operationoverhaul

Жыл бұрын

I wish they would have done that from the factory. I think it is a good investment to do a drain plug kit on these.

@HewHolden

Жыл бұрын

What did you use for a drain plug? And where did you put it

Hey men i think i pushed the filter too hard, and when i turn it on my transmission is making an strange sound. Any idea what could be the problem do i need to redo the whole process and get a new filter i did not change the gasket on the filter either

@operationoverhaul

Жыл бұрын

Sounds like you pushed it to hard into the pump and it could be grinding the end of the filter. I would replace it again and try to wash the pump inlet out too

@jhonhurtado3906

Жыл бұрын

@@operationoverhaul it works now it doesn't make any noice, now what I'm having trouble is measuring the amount of ATF I should put in there.

What does he mean by shutter when hitting 30-50 miles per hour cause I got a Silverado and it’s been jerking when I’m driving. Got insurance as well just like him

@operationoverhaul

Жыл бұрын

Some people refer to it feeling like you are driving over rumble strips.

Some people use a racket strap an 2x4 an pull the exhaust down to get the pan out I am about to do this on my 2015 this weekend I don’t think ever been done I bought it couple months ago from used dealer it got 150000 on it so we see thanks for the video gonna use it

@operationoverhaul

Жыл бұрын

I saw that a few people did that as well. If it was my truck I probably would have gone that route but since this was a customers truck I did not want to risk damage to anything. It is probably much easier that way and like I said, I would do that if it was my truck all day long. Your welcome for the video and hope it goes good for you.

@thetrailkrewpage1752

Жыл бұрын

Lol me too kinda stressing on it thinking about bringing to Chevy to do it lol I got the tools an the no how just not sure if I wanna give it a go on my truck an it not work right lol

@thetrailkrewpage1752

Жыл бұрын

Transmission were one of the only things I didn’t mess with they scare me to much stupid stuff going on

@operationoverhaul

Жыл бұрын

They can be a headache sometimes. Just a lot of parts that can go wrong.

@thetrailkrewpage1752

Жыл бұрын

Yeah we will see I’ll let u know how it goes if I chicken out an had the dealer ship Do it or if I didn’t an didn’t mess it up Lol thanks for the info qn the video 🤘🏻🤘🏻🤘🏻🤘🏻

I ended up putting a new torque converter in mine.....at the moment it seems better. 200K miles, we will see!

@operationoverhaul

Жыл бұрын

I think these had a TSB or even a recall on the converters at one point stating a shudder. Hopefully yours will last you a while longer.

@airforrest

Жыл бұрын

@@operationoverhaul I believe they did...mine started to shudder, I just bought it, and before i did, he changed the fluid and filter like you did. He said it wasnt burnt or discolored, but around the pan magenet there was a buildup of what appeared to be very fine hairs...probably from the torque converter beginning to fail.

@drewzlyfe3455

Жыл бұрын

How is it holding up now ?

Are there any traces on the transmission after changing the oil?

@operationoverhaul

2 жыл бұрын

Not that I know of at the moment

Does this same set up work for a 2012 Chevy Silverado?

@operationoverhaul

2 жыл бұрын

Yes this should be the same procedure for a 2012 Silverado.

@davidprice3020

7 ай бұрын

I haven't changed the fluid or filter yet, I'm hearing a whinny type noice only when you put the tranny in any gear, anybody possibley tell me if that is bearings or tourqe converter, or what else????

Impact wrench? I read the torque setting for the pan is 8-10 ft. lbs.

@operationoverhaul

11 ай бұрын

It is 80 inch pounds. I used an impact driver not an impact wrench. It is about 15 ft lbs on the impact driver and that will not hurt anything. Sorry if I confused you on anything.

@yepok2957

11 ай бұрын

Thank you for the update, however, no need to apologize. I should have done a better job of listening.

Did changing the fluid make the problem worse?

@operationoverhaul

Жыл бұрын

No it didn't make it worse but it really did not help it either. He eventually had it rebuilt at a transmission shop and it still has a small shudder.

@timothysteadham331

Жыл бұрын

@@operationoverhaul thanks. I’ve got a Yukon with the 6L80 tranny that I bought used at 119k miles. It’s now at 140k miles. No problems from the transmission and I’m going to change the fluid, filter, and gasket as I don’t think it’s ever been done. Just want to make sure I won’t cause a problem or exacerbate one by changing the atf. I’m not going to do a flush.

@RecoveryRoomRestorations

Жыл бұрын

@@timothysteadham331 do the thermostat bypass as well,..it keeps the fluid cooler

Xq cortas el video antes de quitar la tapa y des pues de colocarla ???

@operationoverhaul

Жыл бұрын

La cámara murió mientras lo filmaba y no me di cuenta antes de volver a colocar la bandeja.

I read it takes 12 quarts now I'm confused...is it 6 or 12?

@operationoverhaul

Жыл бұрын

If you are doing a complete drain and fill of the pan and torque converter it is 12 quarts and if it is just a drain and fill of the pan it is 6 quarts

@michaeljohnson91501

Жыл бұрын

@@operationoverhaul so not all the fluid comes out when removing the pan? Is it okay to add 6 new quarts of fluid to the 6 old quarts?

@operationoverhaul

Жыл бұрын

@@michaeljohnson91501 no, not ask the fluid comes out when the pan is dropped. The other half stays in the torque converter. This person wanted to a filter change but if you do just a filter and pan gasket you can add just 6 quarts but I would drain it again after a few thousand miles and add another 6 quarts to get a much of the old out as possible. I do prefer doing a full flush if possible over just a drain and fill.

@dylandearmond9802

Ай бұрын

6.2

Did that help?

@operationoverhaul

Жыл бұрын

No not really. I told tye customer that it was pretty much gone once I saw the fluid but he said to finish it anyways and it last about another 2 or 3 months. He finally had it rebuilt and it has been doing good ever since though.

Do I Poor the oil when truck is on or off? Do I drive it than check the oil when truck on?

@operationoverhaul

2 жыл бұрын

Put a couple quarts in it before you start it then crank it up and let get to running temperature. Once it is up to temperature, check it and add until full. Then drive it a few miles and then check it again to top it off.

@edwardmireles3315

2 жыл бұрын

Was the trans acting up before changing fluid. And how is it acting now

@operationoverhaul

2 жыл бұрын

@@edwardmireles3315 the one I worked on just had the typical torque converter shudder and the fluid was dirty. The customer just wanted to see if the fluid change works help the shudder but I let them know that it would not help much if any at all. They eventually just replaced the transmission.

@DANIELSTv

Жыл бұрын

@@operationoverhaul dam

@DANIELSTv

Жыл бұрын

@@operationoverhaul I’m having the same problem with the shudder but at 115k idk if it’s just the oil or the trans

Way too much junk in the pan. I guess everyone does it different. I like to pull out the filter when the pan is resting on the cross pipe. I pull out the heat shield as mine likes to scratch the pan when pulling out. It's 80 inch pounds it's not much.

@operationoverhaul

2 жыл бұрын

He recently had it rebuilt. He just needed to save some money to get it done. He said the truck still has a shudder on the 1-2 shift. He has taken it back to the transmission shop now to see what they said.

That torque converter is smoked.

@operationoverhaul

Жыл бұрын

Yeah the whole transmission was shot to be honest. He had it rebuilt since this video was taken.

Can you come help me in AZ😂

@operationoverhaul

2 жыл бұрын

If I was in your area I would definitely help but AZ is a little bit out of my area 😆

@DANIELSTv

Жыл бұрын

@@operationoverhaul where are you located

@operationoverhaul

Жыл бұрын

@@DANIELSTv I'm in south carolina

Do any of you genius's ever read your owners manual??? My 2015 said to change the transmission oil and filter first time at 45,000 miles+ many more useful info.

@operationoverhaul

Жыл бұрын

This guy bought the truck in this shape. It has been rebuilt since this video. Most people do not look at those. Now cars have a maintenance manual with cars but in most cases the only people looking at that is normally the mechanics.