Silber Turbo install on a 2018 Ski Doo 850
Спорт
www.silberturbos.com
bolt by bolt install of a Silber Turbo on a 2018 Ski Doo 850
tools used:
6mm socket
8mm socket
10mm socket
13mm socket
15mm socket
21mm 12pt Socket and Driver
Ratchet Drivers
Impact Driver
extensions
5/64" Allen wrench
5/16" wrench
T20 Torx
T25 Torx
9/16" Cut down wrench
Spring Puller- Straightline
8mm wrench
10mm wrench
13mm swivel head ratchet wrench
17mm Wrench
flat head screwdriver - small
Flat head screwdriver- long
Phillips screwdriver-long
wire snips
picks
Digital Torque Wrench
Straightline Clutch tool
Primary Clutch wrench
plastic clip puller
anti-sieze for sensor
Syringe for priming oil lines
teflon tape
Loctite
grease for o-ring
windex
long magnet...we all drop stuff!
Пікірлер: 91
Thank God Diz is back on a Doo so I can watch videos again!
@tudizzle
6 жыл бұрын
Noah Lowery bD news...not my sled!
Great video, Makes me want to buy one..
Great awesome video, well instructed to do a turbo on a skidoo not like the powermods !
Hearing it reved up outdoors after would have felt a little less anticlimactic. Good vid, didn't know it could get a turbo for my 800mxz... good to know
Thanks for the video keep them coming!!
Great Video! Thanks Dizz.
Hello, very useful video instructions, if i install this kit, will i safe factory warranty?
Whats the diferance silber and boon docker also can you run a turbo on pump gas (91) or do you have to run avi fuel and if so why?
Does this clutch kit work for all elevation?
I ride on the east coast, usually no more than 4,000 feet. What would you guys recommend for me? I already bought the silver kit. Just want to make sure I set it up correctly. Thanks!
what does the sled dyno after turbo kit insytalled
How much more hp did it give it and total hp all together ,
I need to know where that coolant like on the inside of the turbo runs to
wow very easy install, amazing lol
@tudizzle
6 жыл бұрын
bit longer then an AXYS but still pretty straightforward.
Is it hard changing full wire harness on the 850s?
Where is that turbo manufactured
@tudizzle do you inject 30cc of oil into BOTH oil lines. in the video looks like you did most of the syringe then maby 1 or 2 cc's into the other line?
@tudizzle
6 жыл бұрын
Shift891 the one line is completely empty so the majority goes in the new line and just top off the existing lines
That looks like Legend oil in it not XPS ? @27:40
Great vid, but i'll be honest, it just made me like my axys/sidekick that much more.
@tudizzle
6 жыл бұрын
#sidechick
This kit looks like a pain in the ass to me.
@tudizzle
6 жыл бұрын
Yes, skidoo didn't make it easy. I mean what a pain just to remove hood...let alone the airbox. Pretty straight forward after that.
If I’m smoking a joint on the front in Colorado and the track is still in Utah, am I still legal?
Didn't see much on exhaust system
Wow man ,where's the munchies!
Has this had any affect on the clutch overheating issues these 18' 850's are having?
@billys2740
4 жыл бұрын
Get a clicker clutch. Mega improvement/more power adjustable.
Any plans on making another Crew feature film? They are by far the best Grass roots films on the web. I always watch them in the car before we go hit the powder!
@tudizzle
6 жыл бұрын
JPeters331 thanks! I post more short clips on FB AND IG but we have something bigger in the works this season
@skidoo31
6 жыл бұрын
tudizzle shit man I had no idea! Expect a follow from me on both!
What did you lube the airbox adapter o rings with?
@tudizzle
6 жыл бұрын
just some grease
Still can’t believe brp runs the fuel through the ecu. Sounds like a horrible idea on paper but as long as nothing breaks or cracks it works good to cool the ecu lol.. so kudos to them I guess 😂
Two options: 1st, you can install this turbo kit. 2nd, purchase your standard military hand grenade and throw it at your sled. Both will net the same result.
@tudizzle
6 жыл бұрын
Taco Pro Turbo’s aren’t for everyone.
@fnatomagan
5 жыл бұрын
You'll have more fun with the option #1.
You forgot the parts where you lose half of you socket set and oil clamps under the motor and beat on everything with a rubber mallet to get it to fit
Are you still able to use the SHOT system with the reflashed ECU? I was told by my dealer that there have been difficulties in getting SHOT to work?
@tudizzle
6 жыл бұрын
absolutely
Be gently friends, be gently.
Where do the oil lines Hook back up? I have the 3 way adapter hooked up correctly, it goes to the bottom nipple. Does the line that I marked to begin with go back to the same spot and the new oil line from the turbo go to the last open nipple up top?? Help!
@AdvantageTuning
2 жыл бұрын
That is correct.
@DiffleysLandscaping
2 жыл бұрын
@@AdvantageTuning thank you!
And remember kids, NEVER use a torque wrench when reassembling and Instead ALWAYS trust your electric impact driver!
@robertvinscent6568
5 жыл бұрын
I detect sarcasm 😂
Hey yea
How much weight does it add to the sled and is it quieter with the turbo?
Why does fuel go through an ECU? Serious question.
@sebastienguilmette3435
6 жыл бұрын
cooling
@tudizzle
6 жыл бұрын
not 100% sure..those French Canadians?!?
@Torstein720
6 жыл бұрын
fuelpressure sensor i guess
@randlof123
6 жыл бұрын
No its purely for cooling
@martinhajda2132
6 жыл бұрын
Its to cool the ecu.
I'd hate to have to take the hood off in the mountains, damn.
@bfjoutdoors
6 жыл бұрын
why would you take the hood off? Besides the belt a Skidoo engine compartment might as well be a sealed unit haha.
@tudizzle
6 жыл бұрын
agree..seems like everyone was moving closer to making that process easier...then this
Nice video, but until I watched this I wanted a turbo. Now not so much.
👍👍👍
Looks like he have done this a couple of times
You should never start tightening those torx bolts with a drill very easy to cross thread
well did the install this weekend, after doing multiple other kits on etecs in the past and this has to be one of the more ugly ones to do first time, turbo does not fit the best with trail can, will need heat tape. turbo piping needed clocking, , those oil lines at oil pump sure do not look very secure, ,the larger cold air hose sure don't fit the best on the airbox, and is rubbing on pto injector and steering shaft some.. god for bid having to pull hood off on the hill... hope it runs strong
That would suck if u need to change the plugs that looks like a lot of work just to get to the top of the engine
Just to double-check you guys did say that was an easy install didn't you lol
@tudizzle
6 жыл бұрын
Relatively easy for someone with basic mechanical skills. If not you might want to have your local dealer install it.
tons of mistakes in this vid 4:36 just one example. wheres the lock washer larry?
Taking half the thing apart and their taking precautions to not have to possibly take the chaincase cover off lol
Why do I keep humming "I cant drive 55" while watching this vid ?
I did not know Jeff Bridges let himself go nor did I know he was a fellow sledder.
@tudizzle
6 жыл бұрын
Taco Pro don’t piss on my rug...man
@tacopro218
6 жыл бұрын
Sorry, I should no have knocked your hair. Very uncalled for. Happy sledding.
@rotattor
6 жыл бұрын
Nothing wrong with a hippie tupe ( man wig ).
No effing’ way
How much weed was smoked after the video?
Any thing but easy...
Where’s the blow off valve? Thiers a wastegate... lol where’s the blowoff valve
I can’t imagine anyone would do this now given the readily available, warranteed, and lower cost factory Ski Doo turbo. Unless you’re retrofitting an older sled this wouldn’t make sense.
@cademorris3304
2 жыл бұрын
Blow any factory out of the water
@gregchapdelaine4889
2 жыл бұрын
@@cademorris3304 for more money, no warranty, less reliability, lower resale value - no thanks.
After a 52 minute long video , I sure expected you to give it a few revs and make some noise , that was very disappointing wow .
I would not let these 2 hack mechanics work on a bouncy ball let alone my brand new sled,,
It’s soo much work to get ecu out and send it in, you mine as well get an aftermarket tuner lol.. Jesus! Tell the hippie at the end in the Sandals to start it and rev it a little and let people actually hear the turbo. Nerd!! Lol
@tudizzle
11 ай бұрын
This was 5 years ago, times have changed. Shoot they told us you couldn’t even reflash a snowmobile ECU and get it to work in 2018. Now we plug in our phones to tune kits.
All that plastic ....who said we don’t need oil
I stopped taking this guy seriously when he used metal pliers to take off oil lines