Thanks for the quick sight in steps. I used two old AA batteries wrapped in tin foil. One for the aim point and the other for the impact point. I also picked up on a "Hoo-Yah" at 6:02 on your video. Retired at 25 years. East coast.

Just what I needed. Thanks for posting.

I take tape, aluminum, fasten tape, use an air conditioning and draw a crosshair on a piece of cardboard with it. It shows up great.

I just bought one of these for a rifle build, but decided to toss it on my cheapy KelTEC Sub 2000, and see how it may do with mice plinking. Granted, due to the far forward rail, I was left holding the rifle with the buffer tube over my shoulder, but it didn't stop the fun! Mice look like fireworks when you tag 'em! 😅 Love this scope!

@zacharyzambrana9360

5 ай бұрын

I’d imagine the 9 just plays them lol

Make sure you down load the newest firmware update. Had some cool features

How did you mount your tripod without using the sling swivel? Thanks

@billcauley1531

9 ай бұрын

Arca rail

How far were you from target at sight in? Thanks

@wehunt7

Жыл бұрын

50 yards normally

You don’t need to sight in this way. Shoot a hole in a target while on the bullseye and the heat in the paper stays long enough

@wehunt7

Жыл бұрын

Yeah you could use binos also to look where you hit and make adjustments! I just like to do it and it’s simple but there are definitely plenty of ways to get the job done

mine came with the included ADM mount but it wasnt cantalever. Any details on that?

@wehunt7

Жыл бұрын

I’m not sure! I’ll have to look into that

The video starts at 7:30. (Still lacks the IMPORTANT stuff your here for).

@wehunt7

8 ай бұрын

What would you like to see? This is just how I have sighted in my thermal

Use One Shot zeroing!

Tried this. Not sure what I'm doing wrong but it's not working

@wehunt7

Жыл бұрын

Could be the barrel is bad or ammo is inconsistent! The scope could potentially be bad also but I’m not sure

@boredvet

Жыл бұрын

@@wehunt7 I figured it out. Cheers

That's definitely not a 22lr💥😂😂😂👍

Dude this thing has been a nightmare to sight in. The sight in process is the worst process of any scope I’ve ever delt with.

@wehunt7

Жыл бұрын

Make sure that those throw levers are super tight you don’t want any play in it. other than that you should be able to walk it right in if you have a solid hold and a good heat signature down range

@Daltontanner

Жыл бұрын

@@wehunt7 I’m definitely ganna try what you did this weekend. The scope itself is absolutely awsome! I just can’t swap calibers easily with a quick sight in. I will definitely try what you did this weekend tho.

@Daltontanner

Жыл бұрын

@@wehunt7 I also ordered a new 300 blackout. It could also be my barrel on my 5.56 I’ve sent like 3000 rounds threw it 😂 we shall see!

@wehunt7

Жыл бұрын

Barrel could be inconsistent. But i would just make sure you are shoot the same rounds threw it and should be good! When you go to switch it to another gun you’ll want to use a new reticle and sight it in with the other gun hope you get it dialed in!

@Daltontanner

Жыл бұрын

@@wehunt7 you think I should try a different style reticle? I was using the one with the dot in the middle like in the video

This target is way to big man Pocke a hole and put a cigarette in light it up and shoot the cigarette is the most expensive way to do it

5 minute job with45 minutes of annoying voice yapping