sig p229 E2 review with the extreme hogue aluminum grips.
Жүктеу.....
Пікірлер: 42
@larsonza8122 ай бұрын
Thank you for the honest review. That's an expensive purchase so its good to know you don't see much change. Thank you!!
@paulscountry456 Жыл бұрын
The E2 was actually designed for small hands and was well received by police depth, I love the E2 grip for my hands its perfect.
@joshuatate4876 Жыл бұрын
Don't worry about $1100.00 I just paid $1350.00 for the Elite version. It hurt but worth it.
@ElDuffman
9 ай бұрын
Same here in CA
@SpicyRok748211 ай бұрын
The "E2" ( Ergonomics squared ) grip is designed for less bulky, shorter reach fitment...by several mm's. The "short reach" trigger is different than the "short-reset" trigger, 'tho both go by the same TLA ( Three Letter Acronym ) SRT.
@jamescarter41752 жыл бұрын
I have the Sig P229 with the E2 grips. Great pistol for me.
@Shadowdancer7772 жыл бұрын
I just bought a p229 elite. I bought these same grips. I think they look nice. I paid 90 bucks for them on Amazon.
@cwolf88416 ай бұрын
You can use curved plier grips to pry the E2 off.
@ThePatriotsway Жыл бұрын
Have the same pistola, it’s a good one. Got mine used for around 640 in 2017. They have gone up in price quite a bit since then of course. Still a nice piece. 👍🏻
@moobutt5 ай бұрын
Worth it. Sig metal frame, hammer fired pistols are the best semiautomatic pistols ever…. I have a couple of Beretta’s that aren’t bad, but the Sig’s are better.
@WantedArgonianMale11 ай бұрын
damn thought I had small hands
@andresc5915 Жыл бұрын
You can get an m18 slide and pop it on any p320/m17/m18 grip module. Also, your m17 is based off of the military model (m17/m18) and they have manual safety, so firing by itself shouldn’t be an issue.
@Hammy1088
Жыл бұрын
I'm gonna do that . Thanks
@DaemonCummings2 жыл бұрын
You should really try a CZ P-01 with some aftermarket grips!!
@kgbienesraicesc21premium Жыл бұрын
Greetings from Peru. Can you make a video comparing that grip vs the G19? Thanks.
@MrBubba123bubba11 ай бұрын
This is an older video but have you ever tried the old factory 229 grips? They are like$30 from sig and felt better than the e2
@milijankovic2272 Жыл бұрын
Dude you got some small girly hands. If you like the sig sauer brand get you the P365 which will fit you just right. All and all the P229 is a great gun i have one myself with the hogue grips and wouldn't trade it for anything else.
@jeepster0934 Жыл бұрын
Add the SRT trigger and 18 lb spring for more improvements.
@Hammy1088
Жыл бұрын
I did. helped a little.
@majorpayne52892 жыл бұрын
👍So many choices, so little time :-) Nice ones! Just bought a police trade n P229 w/ DAK trigger. I want to replace the grips but having a hard time finding w/ the inset “SIG” (in center) medallion. Any help locating such would be greatly appreciated. (SUBd)
@Hammy1088
2 жыл бұрын
Try sig website
@jesserodriguez85042 жыл бұрын
Dude I got mine for $700 I was like it's used right the dealer is like nope new I'm like ill take it
@Hammy1088
2 жыл бұрын
Daaaaaaamn. That's good.
@jesserodriguez8504
2 жыл бұрын
But best over all deals I saw was a 229 and 226 DAK in 40 at a gun show for around 300ish the dealer looked a little shady and that price was really out of the ordinary unless he was really hard up for money those looked pretty new and another 229 dak 40 that was used but like 300ish I had just bought mine so I'm like I don't need another P229 then I'm like dang could of bought it and sold it for more or just keep it I went back but it was gone I'm like dang that was practically giving it away
@maxhernie8053 Жыл бұрын
are these the matte aluminum grips?
@Hammy1088
Жыл бұрын
Yea I think so.
@jdmb03 Жыл бұрын
E2 grips are as thin as you can get.
@christianhardwick6530 Жыл бұрын
Get the hex grip screws
@richardfiedler2201 Жыл бұрын
229 nice gun old school. Sounds like you paid a little too much for it but it's a nice piece.
@Hammy1088
Жыл бұрын
Yea I paid way to much for it. Rip off I think
@ktalanguyen
10 ай бұрын
Yeah I think he got ripped off by gun dealer, where he bought it from. I paid $954 with tax for my p229 legion ( from Grabagun dealer in TX).
@puma519213 ай бұрын
With your small hands get a cz they are smaller framed
@sycamorebacker12 жыл бұрын
I have small hands too so I like CZ guns and smaller guns.
@Hammy1088
2 жыл бұрын
I never shot a cz.
@sycamorebacker1
2 жыл бұрын
@@Hammy1088 You need to try the cz 75 p-01 or the p-10c or p-07 or 75 compact. The 75's just melt into your hand and you can do SA with a safety and the short trigger reach or DA.
@Hammy1088
2 жыл бұрын
@sycamorebacker1 I'm gonna see if ny local shooting range has it for rent
@kagyu1 Жыл бұрын
I switched to the CZ P-01. IT’s everything the P229 could have been. My P229 grips suck as the ergonomics of the gun are terrible. It’s the only gun I would ever sell . It’s like shooting a brick. Was hoping the Hogues would be better…. Not just slimmer , but also better for palm placement . There is a reason you don’t see P229’s or P226’s in USPSA.
@Joetrout Жыл бұрын
I don’t think it’s the gun. Es las manitas que tienes home boy
@richierich111 ай бұрын
Never change the trigger on your carry or home protection gun. You can go to jail. Look it up.
Пікірлер: 42
Thank you for the honest review. That's an expensive purchase so its good to know you don't see much change. Thank you!!
The E2 was actually designed for small hands and was well received by police depth, I love the E2 grip for my hands its perfect.
Don't worry about $1100.00 I just paid $1350.00 for the Elite version. It hurt but worth it.
@ElDuffman
9 ай бұрын
Same here in CA
The "E2" ( Ergonomics squared ) grip is designed for less bulky, shorter reach fitment...by several mm's. The "short reach" trigger is different than the "short-reset" trigger, 'tho both go by the same TLA ( Three Letter Acronym ) SRT.
I have the Sig P229 with the E2 grips. Great pistol for me.
I just bought a p229 elite. I bought these same grips. I think they look nice. I paid 90 bucks for them on Amazon.
You can use curved plier grips to pry the E2 off.
Have the same pistola, it’s a good one. Got mine used for around 640 in 2017. They have gone up in price quite a bit since then of course. Still a nice piece. 👍🏻
Worth it. Sig metal frame, hammer fired pistols are the best semiautomatic pistols ever…. I have a couple of Beretta’s that aren’t bad, but the Sig’s are better.
damn thought I had small hands
You can get an m18 slide and pop it on any p320/m17/m18 grip module. Also, your m17 is based off of the military model (m17/m18) and they have manual safety, so firing by itself shouldn’t be an issue.
@Hammy1088
Жыл бұрын
I'm gonna do that . Thanks
You should really try a CZ P-01 with some aftermarket grips!!
Greetings from Peru. Can you make a video comparing that grip vs the G19? Thanks.
This is an older video but have you ever tried the old factory 229 grips? They are like$30 from sig and felt better than the e2
Dude you got some small girly hands. If you like the sig sauer brand get you the P365 which will fit you just right. All and all the P229 is a great gun i have one myself with the hogue grips and wouldn't trade it for anything else.
Add the SRT trigger and 18 lb spring for more improvements.
@Hammy1088
Жыл бұрын
I did. helped a little.
👍So many choices, so little time :-) Nice ones! Just bought a police trade n P229 w/ DAK trigger. I want to replace the grips but having a hard time finding w/ the inset “SIG” (in center) medallion. Any help locating such would be greatly appreciated. (SUBd)
@Hammy1088
2 жыл бұрын
Try sig website
Dude I got mine for $700 I was like it's used right the dealer is like nope new I'm like ill take it
@Hammy1088
2 жыл бұрын
Daaaaaaamn. That's good.
@jesserodriguez8504
2 жыл бұрын
But best over all deals I saw was a 229 and 226 DAK in 40 at a gun show for around 300ish the dealer looked a little shady and that price was really out of the ordinary unless he was really hard up for money those looked pretty new and another 229 dak 40 that was used but like 300ish I had just bought mine so I'm like I don't need another P229 then I'm like dang could of bought it and sold it for more or just keep it I went back but it was gone I'm like dang that was practically giving it away
are these the matte aluminum grips?
@Hammy1088
Жыл бұрын
Yea I think so.
E2 grips are as thin as you can get.
Get the hex grip screws
229 nice gun old school. Sounds like you paid a little too much for it but it's a nice piece.
@Hammy1088
Жыл бұрын
Yea I paid way to much for it. Rip off I think
@ktalanguyen
10 ай бұрын
Yeah I think he got ripped off by gun dealer, where he bought it from. I paid $954 with tax for my p229 legion ( from Grabagun dealer in TX).
With your small hands get a cz they are smaller framed
I have small hands too so I like CZ guns and smaller guns.
@Hammy1088
2 жыл бұрын
I never shot a cz.
@sycamorebacker1
2 жыл бұрын
@@Hammy1088 You need to try the cz 75 p-01 or the p-10c or p-07 or 75 compact. The 75's just melt into your hand and you can do SA with a safety and the short trigger reach or DA.
@Hammy1088
2 жыл бұрын
@sycamorebacker1 I'm gonna see if ny local shooting range has it for rent
I switched to the CZ P-01. IT’s everything the P229 could have been. My P229 grips suck as the ergonomics of the gun are terrible. It’s the only gun I would ever sell . It’s like shooting a brick. Was hoping the Hogues would be better…. Not just slimmer , but also better for palm placement . There is a reason you don’t see P229’s or P226’s in USPSA.
I don’t think it’s the gun. Es las manitas que tienes home boy
Never change the trigger on your carry or home protection gun. You can go to jail. Look it up.
@Hammy1088
10 ай бұрын
I'll check it out.
Go down to a 17# spring