Great video, includes little tips on the install and lots of detail which I like, this will help a bunch of people wanting to install the sicass tail tidy on their bikes. Fantastic job mate,thanks for taking the time to do this video and keep up the good work 🙏🏼👍🏼

@alexkellum1

3 жыл бұрын

Appreciate the feedback my friend! Stay safe out there!

All I did was remove that monster rear license and white plate light. Underneath was the perfect smaller, stronger piece ready to go. I even used the stock turn signals and drill a mounting hole away from the exhaust and plug everything back together. Didnt cost a cent and achieved the exact same thing. I do like the flush mount signals and if need be i'll mount em up. They hidden section underneath allows a perfect location for those signals. cheers.

i watched the whole video for the info at 6:54.. been wondering how i was going to get that plug through that tight spot thanks for doing this video.. i think your is the only one..

@alexkellum1

4 жыл бұрын

Randy Marshall thanks for the view and glad it helped!

Very nice video, very informative !!! Now to wait till they put out the kit for my 2021 Husqvarna FE501s. Already broke the right turn signal off.

@alexkellum1

3 жыл бұрын

Thank you! Haha looks like you’ll be using your arm to signal

This was a good video, helped me out. Thanks bro

@alexkellum1

3 жыл бұрын

Glad to hear mate!

great video!

I have a 2021 excf 500 and there arent any underfenders for that. Could i use a 2019 underfender?

I have a 2005 400exc ktm what do you recommend for me? Im new to thi

I did that mod several years ago and recently had to put all the OEM equipment back on to get through our Motor Vehicle Department for inspection. Once I passed I put all the Sicass equipment back on. Good for 2 more years. Hopefully your state doesn't make ya jump through hoops. The inspector did bust my balls and say my stock turn signals (front & rear) were too small but let me slide. Let's Go Brandon!

this is perfect

Thanks for the tutorial!

@alexkellum1

2 жыл бұрын

Hope it helped!

GOAT

Any idea on rough torque? I just put them on yesterday on an uneven surface and feel that tightening the screws more would allow the rubber to conform better to the surface, but then I don't want to destroy the brass inlets...

@alexkellum1

3 жыл бұрын

I just made it snug and secure. Eventually I just didn’t even put those two on. I took off the setup when I rode on the Mx track and put it back on after

Great, wud up!

Question, my screws holding the battery to the plastic and fender are just not holding. What should I do?

@alexkellum1

3 жыл бұрын

larisagnia hey there! Are these screws going into plastic or are these machined screws going into a threaded nutsert?

@larisagnia3593

3 жыл бұрын

@@alexkellum1 so the two screws holding the rear fender to the metal battery part. You have your batteries metal wire drilled to the metal base, mine goes through those screws above. If that makes sense? So it would be plastic. The oem fender had metal threads, the sicass doesn't.

Whens sic ass coming out with one for 2020 I need.it

@alexkellum1

3 жыл бұрын

Billy Butthole did the 2020 change to where the current one wouldn’t work? I haven’t been up close so I have no idea

@ktmdays

3 жыл бұрын

@@alexkellum1 they dont make a aftermarket fender kit for the 2020 ktm excf taco moto is comming out with one in oct they said i been looking for a grab handle and just found one at amoco they got those that's the problem with buying brand new I gess u got to wait for some stuff I got everything else👍

The drive into the garage was too intimidating for me to watch...I had to close the window!

@8:48 hahah cute

@alexkellum1

3 жыл бұрын

*Slowly opens garage