I know you'll watch this f you Avery

@ThisOldTony

4 жыл бұрын

Avery!!

@noahhastings6145

4 жыл бұрын

AVERY!!!

@ObviousSchism

4 жыл бұрын

That's a very good point

@bc8010

4 жыл бұрын

Avery won't even know what hit him

@avery6846

4 жыл бұрын

Wow I don’t even know you. How did you know?!

Hey, thanks for mentioning me! It looks like the problem was that you used an east-west magnet. In your geographic location, you might need a north-west magnet.

@amargnwalkr

4 жыл бұрын

C'mon Tony, pin this!

@jjppmm29

4 жыл бұрын

not to be confused with a north by north west magnet

@Phroggster

4 жыл бұрын

Tony's degausser cancelled the South by Southwest magnets this year.

@philwelch2447

4 жыл бұрын

I have a feeling that formula was ToT's Law of sub-scribe mechanics.

@davidlong2691

4 жыл бұрын

Hi Ben! Faraday's Law of Induction in integral form right? What is the extra path integral for? I'm a little rusty since graduating...

Now I want a magnet with East and West poles so I can make my own magnetic cold war.

@staglomagnifico5711

4 жыл бұрын

I've never been this anxious watching an East and West pole since the Polish Civil War!

@nicksummers8320

4 жыл бұрын

The fact that you can flip it over for Yes and No poles is extra fancy. Normally you have to get two separate magnets for that. Thats how they get you I guess.

@user-ow1jh8yb5j

4 жыл бұрын

Just don’t leave it near the iron curtain

@TrueBoolean

4 жыл бұрын

@@nicksummers8320 It was Y/N before he flipped it over. That means THERE ARE TWO MAGNETS! Well, there were two magnets. Now there's a magnet and a polish horseshoe I guess...

@2lefThumbs

4 жыл бұрын

EW! Yes and No poles ftw!

I dare you to return that magnet, complaining that it wasn't permanent as advertised.

@boots7859

4 жыл бұрын

I LOL'd, +1

@c.blakerockhart1128

4 жыл бұрын

And it's got the wrong directions on it.

@aycfes2891

4 жыл бұрын

YES

Just remember to never point the demagnetizer at the ground, this will cause the earth to loose its magnetic field. demagnetize responsibly.

@Timberwolf69

4 жыл бұрын

Wise words. Not listening to them might speed up the process of our world's magnetic field toppling over...

@23chaos23

4 жыл бұрын

@@Timberwolf69 multiple people doing it might just cause polar oscillation. Creating an magnetic induction field we can pull limitless free energy with wireless devices with AC induction coils.... But unfortunately, the "wishful thinking" unicorn police, employ wizards to insure this will never happen

@AbhishekThakur-wl1pl

4 жыл бұрын

@@23chaos23 woah dude

@ttarratto

4 жыл бұрын

Thank you chaos

@matthewellisor5835

4 жыл бұрын

@@23chaos23 I think I'll stick with vacuum energy. "Zero-Point" if you prefer. Speaking of that, didn't you blow up 5/6 of a solar system a few years ago?

This old tony my thermo professor found your vortex tube vid and got inspired to give us a HW problem on it for my Thermo Class. You may not know this but your work has now been introduced to Purdue University's School of Mechanical Engineering. I hope you see this!

@tylerstagge7465

4 жыл бұрын

Daniel Ramirez Damn. If TOT was on the syllabus, maybe I would have woken up for 7:30 ME 200 :)

@garyknight8616

4 жыл бұрын

Funny you should mention the vortex tubes. I was going to do a detailed CFD model of TOT's but could not determine the mass flow of air TOT used so there was little point. Wanted to try out various turbulence models to see if I could reproduce the temperature changes. Hope you enjoyed your Thermo class.

@danielramirez8661

4 жыл бұрын

​@@tylerstagge7465 Me 200 was a great course if it wasn't for the early morning wake up call. If TOT was a part of this course you are right I would show up everyday.

@g96bento

4 жыл бұрын

@@danielramirez8661 If only this was around 2 years ago when I took me200...

@stargazer7644

4 жыл бұрын

@@danielramirez8661 What year of University do they teach how to spell "you're"? Just wondering.

It’s a scientific fact that Mars lost its magnetic shield when Martian TOT accidentally dropped the demagnetizer business side down on the ground when it was running.

@bobedwards8896

4 жыл бұрын

some say its core of Olympus mons , still rattling away today

@thomasjake3920

4 жыл бұрын

... and the drop was because Martian TOT was running with a demagnetizer, just after Mom TOT had told him not to.

@matthewellisor5835

4 жыл бұрын

@@thomasjake3920 If I've told you Once...

@arthgrel

4 жыл бұрын

That's why it's a dead planet today

@jum5238

4 жыл бұрын

And you thought Elon Musk sending an automobile into space with a dummy was just a stunt. He was trying to re-magnetize the whole darn planet! You know... go big or go home... or in this case, go to Mars.

If u try this on credit cards, it´s called „demonetizer“

@DenizOzmalkoc

3 жыл бұрын

*demoneytizer

@wabash1581

3 жыл бұрын

DemonTisers! Like Anytisers, but they taste better. And remove your soul from your body at the same time. A nice 2 for 1 deal.

"what did you expect when clicking on this video" Dad jokes.

@ColonelSandersLite

4 жыл бұрын

That's exactly what I was thinking.

@jonsquatch

4 жыл бұрын

An explosion, a black hole with a cat poking out of it, magnet pretzel, ma hoe references... but some type of dad joke...

You’re a monster. That innocent magnet, that poor innocent magnet.

@johnpossum556

4 жыл бұрын

At least he used a newfangled Craftsman screwdriver when chosing one to canfuckulate with it.

@Margarinetaylorgrease

4 жыл бұрын

@jumblesgoodridge Chickadee

@jakx2ob

4 жыл бұрын

Got _Who Framed Roger Rabbit_ vibes from this one.

@Sekrf

4 жыл бұрын

Magnet? What magnet? ¯\_(ツ)_/¯

@Whytho2000

4 жыл бұрын

That magnet wasnt right in the head, It was one of them non binary east west magnets.

Remember to empty your demagnetizer once in a while.

@m3chanist

4 жыл бұрын

Ha! Into a jar next to were he keeps his threaded holes perhaps, no worry about magnetizing those.

@BillionPlusOne

4 жыл бұрын

Yeah all that magnetism buildup has to go somewhere.

@ralfgottfridhansson3127

4 жыл бұрын

@@BillionPlusOne he is slowly moving the magnetism www.visualcapitalist.com/magnetic-north-pole-moving-to-russia/?fbclid=IwAR3nsU5upVEfxqgdiTUiAc5pH6cKJ9BMntn4DxYObC3YG2KgHmJXYmrok-Y

These are also great for demagnetizing DVDs. Next to a DVD rewinder, one of the most useful gadgets ever invented.

*"aaaand demagnetized"*

It’s just Dad joke after Dad joke. I’m saving that « let me back up a minute » for my kids whenever I get to see them again.

@floorpizza8074

4 жыл бұрын

It isn't *just* Dad joke after Dad joke... They're told by a master. I mean, c'mon... if you or I tried to pass his material off on our kids, think we'd even get a chuckle? pfft. No way. Give the man credit where credit is do: our boy can deliver Dad jokes like a master of stand-up.

@Timberwolf69

4 жыл бұрын

@@floorpizza8074 He was so good that I didn't even notice him telling jokes...

To be honest I got exactly what I expected when I clicked on this video - something to brighten my day. Thanks OT. Regards from Dublin, Ruaidhri

@stuartsmith945

4 жыл бұрын

Is it ever any different with TOT?

@psion5mxfred

4 жыл бұрын

@@antrygrevok6440 It's Gaeilic the "Rua" is Red, "Rí" is King - so the red-haired king!! I'm neither - at 72 there's not much hair left to be any colour :-) Any yes, we really love a nice bit of murder (usually after tea in the evenings). Regards, Ruaidhrí

“What did you expect when you clicked on this video?’” Matter-antimatter annihilation?

TOT, This rates as one of you funniest. My wife won't even laugh when I explain the jokes to her. My all time favorite is your machinists multimeter video. No one in my circle understood any of those jokes except a couple of my sons. Your videos make me laugh and I use them to torment and annoy folks that don't understand them. That frustrates me, but I get to laugh at least twice!

@dreamyrhodes

4 жыл бұрын

How can one not understand ToT jokes. Thought we lived in a civilisation

@TryptychUK

4 жыл бұрын

I showed one to my ageing Dad who used to be an engineer, and the humour went right over his head. Mind you, he was impressed on how to drill square holes.

@Sharpless2

4 жыл бұрын

@@TryptychUK everyone knows you just buy holes and install them. Pffft stop the drilling conspiracy.

When I was a kid I put a magnet on the old tube style console tv... resulting in a big purple spot. No amount of turning the tv on and off would make it go away. I thought for sure I was in big trouble. But my Dad pulled out an old tape demagnetizer and waved it over the spot on the tv and it magically disappeared. My life was spared that day..

@chrispza

4 жыл бұрын

Jeff Clark Did the same, playing around with an old magnet I pulled off a car speaker. Had to make my own demagnetiser, though. My father was not tech-savvy.

@thebanjoman1963

4 жыл бұрын

All I ever did with the TV as a kid was get to hold the rabbit ears so the picture would be better and stand there so Dad could watch the game, and keep my mouth shut while doing it..

@danielchandler15

4 жыл бұрын

If only I would have had a demagnetizer it would have saved my rumble seat.....

@Mr.Potato420

4 жыл бұрын

@@danielchandler15 i just used the magnet and pulled the purple spot down in the corner past the plastic lol

@superdau

4 жыл бұрын

Been there done that. I was sweating until I found that swiping the magnet over the screen several times removed the color spots again (almost ;) ). A manual demagnetizer! But does anyone know, is it possible to bend the shadow mask with a magnet? I am almost sure I did that on a CRT that was going to be trashed anyway.

Having done my military duty during the Vietnam era in the Air Force, there was a procedure to demagnetize the "skull plate" of the KC-135 and B-52 aircraft on which I worked. This was to prevent any stray magnetism from affecting the accuracy of the "Whiskey Compass" located in the cockpit. The tool that accomplished the job was a big coil of wire shaped in a circle that would then be plugged into aircraft power at 115V and 400hz. Just rubbing the coil on the plate for maybe a minute would do the job. This had to be done from outside the plane, so a jackstand was used. You'd be 20 or 25 feet up, leaning over, looking down into the windshield of the plane, and rotating the coil over the skull plate, a plate located directly above the middle of the windshield. If a plane had been struck by lightening during flight (and it happens quite often) there would be a write-up to have the skull plate demagnetized.

@whatelseison8970

4 жыл бұрын

I like this story.

@blackmarketyardsale

4 жыл бұрын

I ate a grilled cheese once.

@Hopeless_and_Forlorn

4 жыл бұрын

When the nose gear strut on an airplane with retractable gear gets magnetized, the pilots may notice that the whiskey compass reads differently with gear down or gear up. The strut is closer to the compass in the wheel well than it is when extended, and also oriented closer to the plane of the earth's magnetic field.

@dmc2554

4 жыл бұрын

@@blackmarketyardsale ,,,,with onions ??

@HB-ps6rn

4 жыл бұрын

I think they do something similar with ships to reduce risk from magnetic mines. It's the largest demagnetizer in the world if I'm not mistaken

What did I expect when I watched this video? Exactly what I got.... Pure entertainment. (And a little bit of knowledge).

To put E and W on a magnet pools is simply a comedy genius :) Yove you man :)

On the twentieth day of Quarantine-mas, This Old Tony gave to me, A video that was most silly...

@randyralls9658

4 жыл бұрын

We been getting a lot of videos I love quarantine

@Michael-OBrien

4 жыл бұрын

No, it was cereal

I loved the East and West poles.

You forgot to include use of "HDD that you don't want the FBI to see..."

Always entertaining. Thank you.

One of the good things to come out of the lockdowns - looks like Old Tony is on a upload frenzy?

@TexasTimelapse

4 жыл бұрын

I'm enjoying it too!

@ericlotze7724

4 жыл бұрын

imma hijack this to say can he UPLOAD the files for the Pasta Machine. Open Source Industrial Pasta Machine sounds great to me...

@alextopfer1068

4 жыл бұрын

We should send someone around to the garage to check on him. maybe drop off some material too

@garys9694

4 жыл бұрын

Yeah, like this one at 4 minutes, I want to lose myself, can't do that in 4 minutes, no matter how damn good it is!

@ericlotze7724

4 жыл бұрын

@@alextopfer1068 Meals on wheels, but bar stock

common tony those last chips where stainless steel wherent they

@HvV8446

4 жыл бұрын

kurt titeca he liked your comment, i take that as a yes

@boulder795

4 жыл бұрын

I was thinking titanium but stainless is a good bet

@ukaszSkowerski

4 жыл бұрын

This was all just CGI...

@quiettime6871

4 жыл бұрын

Most stainless is magnetic

@davidgrosshauser5268

4 жыл бұрын

It’s pretty clear that was a funny shaped pencil he colored red and tipped in white.

Thank you for posting more during this quarantine, makes it all a bit more bearable.

I was totally waiting for a cameo from ElectroBoom to flip the Big Red Switch!

QOTD: What did I expect when I clicked on this video? A: Watching you do some goofy stuff. . . And I wasn't disappointed.

@ugetridofit

4 жыл бұрын

I agree with you but keep ti clean man. The best things about TOT is that he does not swear.

@claytonsanchez5264

4 жыл бұрын

@@ugetridofit swearing? *cough* Who swore?

what was i expecting from this video? A dorsal fin on your finger as it approached the switch on the demagnitizer! lol

You are fantastic! In a verry good way. Thank you for your work. I enjoy it.

Keeping us sane! Thank you TOT.

I tried this with a neodymium magnet a few years back and it shot into the air and blew the fuse on my demagnetizer. Good times.

@narcoleptic8982

4 жыл бұрын

Melker Claesson i got 10 bucks that that wasn’t even a magnet, just a bent piece of steel that he magnetized before the video.

@frtard

4 жыл бұрын

@@narcoleptic8982 Wait. You know steel can be a magnet, right?

@narcoleptic8982

4 жыл бұрын

frtard you know what I mean...

@Asdayasman

4 жыл бұрын

@@narcoleptic8982 Some would call that a "magnet".

@HammyJamPants

4 жыл бұрын

@Narcoleptic Most horseshoe magnets are either AlNiCo or magnetized steel. Both materials have very low intrinsic coercivity and would be extremely easy to demagnetize compared to other types of magnets. Why aren't there common horseshoe shaped magnets of different materials? It's an issue of the shape being a good match for materials which are not brittle (ceramic and NdFeB are brittle) and have a low enough coercivity to have poor reliability unless they're in a closed magnetic circuit.

Applied Science? I see you too are a man of culture.

Thanks Tony for all your hard work. You my friend are a talent!

Ive seen these before always wondered what good they do thankyou for telling us the uses

The EW on the magnet is the best part of the video.

"Ben of Applied Science, here on KZread writes......" 🤣🤣👏👏 Funniest gag I heard this year. You win something or other, Old Tony

@johnpossum556

4 жыл бұрын

He wins a genuine DeLorean, Teabag McPick!

I cant believe you KILLED a perfect magnet. Such a rare specimen like it was

Awesome as ever, you bring light to these worrying times my friend 😁👍🏼💪🏼

The suspense!! 100% expected that magnet to disappear and 💢 * pop * out of existence forever when that was switched on...

First Adam Savages "finger Vs lathe" video, and now this. The machines win every time. We are doomed!

@rcjbvermilion

4 жыл бұрын

And here we were waiting for a robot uprising. And all we needed was a few machine shop tools...

@njones420

4 жыл бұрын

I'm frankly amazed it took Adam that long to hurt himself...love his stuff, but he does go at everything like a bull in a china-shop.

absolutely enjoy all the humor you put into your video while educating the world on machining works! keep up the great work, !love your videos.

Tony thank you for keeping us entertained right now.

This is boredom the likes of which we've never seen from tony

@Arckivio

4 жыл бұрын

Exactly what I was going to say!!! Next video will be how to open paint tins with our newly demagnetiser paint can opener!

@july8xx

4 жыл бұрын

This was my first thought TOT is really getting bored now.

@shrikedecil

4 жыл бұрын

(Wanders off to see if AvE is saying "Hold my beer" yet.)

An earth shattering kaboom!! When I was a broadcast engineer, a set of keys on a tape demag stood in for an electric chair. Tons of fun!!

@dmc2554

4 жыл бұрын

What was that Martian's name ??

@Timberwolf69

4 жыл бұрын

@@dmc2554 Marvin?

@dmc2554

4 жыл бұрын

@@Timberwolf69 Good call!

Loved every second of this one, Tony!

This was just the kind of uplifting vid I needed in these polarising times of flux. A real field good vibe. Thanks again TOT!

I've expected "Thanks for watching" at the end... My disappointment is immeasurable, and my day is ruined. PS. Thanks for every little video and edit like the "like" on fuse cap - me and my friend try to catch as many as we can and see who's better at noticing them. Great fun in this times :D

@mikemx55

2 жыл бұрын

OMG, I've seen this video so many times and never caught that "like". I think I get all the other "subscribe" ones, among others. Starting to question myself now

Gotta love the Eorth and Wouth poles of the magnet!

i live in an area where everyone is breathing each other out of existence at a high rate, so getting these video's has been a major bright spot in my exile.

The best jokes you've done, I laughed the entire time. well done!

The "E" "W" Uranus magnet destroyed. Have to pull another one out.

@Froobyone

4 жыл бұрын

Very nice sir. Very nice.

Forgot to show us the drain plug on the back side. this way when its full of Magneat-0h you can drain and start all over.

@tamberp

4 жыл бұрын

Just make sure to never pour your waste Magneat-0h down the drain, that's *highly* irresponsible. Also, don't let it spill on the floor, it makes it real hard to sweep up the swarf...

Thank you Tony, you just made my day. Keep safe & keep posting.

I was in the middle of my second semester of the machining program when everything shut down and watching your videos makes me feel like I’m back in the machine shop. I love it!!!!

One very magnetic lesson; Forgetting to remove your durn hearing aids when going in for an MRI. Oddly enough, they just don't work the same after that! :)

@mikecurtin9831

4 жыл бұрын

Thanks very much for this tip. One of those things I wouldn't think about. Did they get hot?

@LetsJeep

4 жыл бұрын

Hi Mike, No they didn't get hot. The final question they asked before entering the donut was if I had removed all metal. Well, uum, yeah.... Sure enough, I still had my hearing aids in when I checked. Had to have both receiver tubes replaced. The main bodies survived. Saying.... Huh? and half reading lips sure was annoying, yet much cheaper! Heheh!

@sansdecorum4600

4 жыл бұрын

Eh?! What's that, sonny?

@LetsJeep

4 жыл бұрын

@@sansdecorum4600 I've had to deal with hearing loss for 25 years. Certainly not due to crippled up, mentally feeble or old age senility! Can't say I'd wish the lottery of Meniere's disease on anyone I know. At 40, I thought it was my Wife's voice that caused it all. A good excuse is one you can use over and over again! :) After the MRI, they concluded they didn't find anything of concern. I said, well dadgummit that explains what that fancy electro-magic contraption was fer. You whippersnappers could see right through me! LOL! Them big city folk musta never watched the Beverly Hillbillies growing up.

If I'm honest I expected to see some hands give me some tips I would probably never use.

Wonderful, just wonderful

The suspense was killing me! Amazing.

"Maybe even pull it through the arm pit of your sweatshirt..." Have you been watching me!?

Yes, I admit, I once drove a screw with my tin can opener.

I just love watching your videos. Very Informative and funny. Thanks a lot 🙏

I cannot even deal with the absolute hilarity of all the vids u do man. Nothing but relatable awesomeness in the fourth dimension. Love it.

This old Tony.... Making lockdowns a breeze, since...errrr two weeks ago (and providing entertainment for years before that!) :) Cheers ToT and good health to you and yours.

Is that little shred of laser film stuck under that rivet driving anyone else insane?

@EggBastion

4 жыл бұрын

yep

I needed a good healthy laugh tonight. Thank you Tony.

Your videos are ridiculously good. Videography, comedy, machining, you do it all!

Next up: This Old Tony vs the KZread Demonitizer. Who will win?

The upside of a pandemic: much more videos from ToT!

Good stuff as always it brought a smile to my face. Thanks for sharing. GW

It wasn't what I was expecting that brought me to this video, it was the journey!

*Demagnetizer????* *I hardly know ‘er!*

Honestly; I was waiting for the magnet to go "tchiiiing" while rocketing across the shop. XD

The opening was absurdly wonderful

Thanks so much for all the extra content lately. I'm sure I'm not the only person who's a prisoner in their own home appreciating your recent output. THANK YOU!

Damn, I love that guy

I expected (metal) marbles and some plywood, - wait, today is tuesday.

Brilliant!

I needed that, thanks TOT! So many sad things happening these days, you almost demagnetized my frown.

"this is great with credit cards" XD

For a moment I though that said Demonitizer!

@stevenpederson1645

4 жыл бұрын

It is if you put a gift card on it.

@jamesgardner2101

4 жыл бұрын

Well, that magnet had only 2 poles, so that's not impossible. A nonbinary magnet probably would have gotten paid double.

@johan6983

4 жыл бұрын

this ain't AvE..

@TheFarCobra

4 жыл бұрын

@chrono0097

4 жыл бұрын

Now thats an invention that Michael Reeves doesn't like

I think i laughed through this whole vid. Loved every second of it

The Entertainer. And I was rewarded. Thanks Tony.

"Great with Credit cards" hahaha yeah man. I got one of those little non electric blocks, but honestly I'm magnetizing more things than demagnetizing. Drives me crazy when I have a new tiny screw & out of my 100 bits, it's the one that hasn't been magnetized... Damn you Murphy's Law!! Hope all is well, take it easy.

I expected the magnet to go shooting off across the shop. I've seen it happen with a much smaller magnet on a demagnetizer.

This is the bright side of lockdown. More This Old Tony vids per week than I can handle. Thanks

It doesn’t matter what I expected. I want more!!

I did not really know what to expect but when I see this old Tony I click.

@jum5238

4 жыл бұрын

I know, it's Pavlovian for me too.

I just started watching your channel since being quarantined. I'm almost caught up with all of your videos. Yes. *All* of them. In fact, I had to pause one to click on the notification to watch this one. I'll never be a machinist, but you make it so interesting and your jokes are A+. Thanks for inviting me into your shop.

What did I expect clicking on the video you ask? A fun video from one of my favorite youtubers. Was not disappointed.

I expected a funny and entertaining few minutes. Mission accomplished!

Where did you get the East/West magnet?!? I keep looking online but all I can ever find is N/S

@emmetedwards7726

4 жыл бұрын

This is an extremely ignorant question and ten seconds of google would have told you that an NS and EW magnet are the same thing at the equator. It's just more marketing BS from BIG MAGNET trying to convince you to buy into their lies. Don't believe them, no matter how attractive they are.

@Danoliveira3

4 жыл бұрын

@@emmetedwards7726 but what if you dont love in ecuador? I live in Brazil it's close but i think S/W and N/S would be different here

@perrylc8812

4 жыл бұрын

M.E. Edwards guess you didn’t get the joke.

@ericg7044

4 жыл бұрын

@@perrylc8812 Actually it seems like you are the one who didn't get the joke.

@Bannimann2

4 жыл бұрын

@@perrylc8812 Oh the irony...

Hearing the words can opener whilst working on a CANopen project really threw me for a loop. I've gotta take a break now lol. Great vid

What I expected was to be entertained and you delivered.

I love your wit , awesome

I bought one of those tiny cheap demagnetizers online, the ones under ten bucks, they work great. Even for stuff as big as wrenches. Now I have 3.

@willi-fg2dh

4 жыл бұрын

whatever you do, don't put two of them together plate-to-plate . . . it's almost as bad as dividing by zero!

@simonsben

4 жыл бұрын

Did the big wrenches help with the breeding program or was it mitosis?

@someguy1508

4 жыл бұрын

ben simons the First one asked for company. Who was I to argue?

@leslieaustin151

4 жыл бұрын

Some Guy Do you have a 3D photocopier like ToT? Where do you buy them? Les in UK

I have one of these in my shop! Very useful for getting rid of all this ad revenue I've been getting... Oh wait, I'm thinking of my demonetizer.

Thank you for keeping us sane in these times ToT.