Kev you should try to fabricate your own rc parts

I am glad I caught this video! I was stuck on removing my front differential. I removed my rear one and did the seal like you did, but I added a bunch of grease into the planetary gear system and ran some into the axial on both sides and some seal. So far, I have gotten an extra 3 miles in speed out of it. Now that I get how the front one comes out I am going to grease that one up as well and see if I can beat that 35 mph top speed! Thanks, Kevin!

Found the sound affects at the start funny and good quality video. CANT WAIT FOR THE NEXT!!!!

Happy to see there wasn't too much sand in it. Looking forward to the center and front video.

Kevin this is why I subscribed to your channel to watch you work.!!

It’s so cool how Kevin knows how to fix all these rc cars

@chad9160

6 жыл бұрын

i do as well 😊 it's easy after a couple years😀 I have built my own

@ClarkesMadRcs

5 жыл бұрын

I do it you just got to have the balls to do it and not mess it up lol

I love this car it's my favourite rc car of all time since it came out. One day kev one day haha when I do your SICK eBay course I should be able to get it lol

Hi Kevin 🤓! I'm really enjoying your videos! Especially on the UDR. I'm going to scratch build my UDR and you're saving me so much researching. Thanks for your videos 🤓!

Nice sound effects when removing the tires Kev! Good video as always dude!

Love the wheel sound effects

Amazing video man! Great editing skills and awesome presentation. Thank you! I have lots to learn lol :)

Your videos are absolutely awesome 😎

I watch all of your videos keep it up love your videos

8:50 AHHHH i was wearing headphones 😂 😂 😂

I like the sound effects great vids keep, it up

My diffs looked about the same on my udr. I was hearing things about sand tracking up the axle tube. But looked good. I am going to get a better motor for that vanquish speed run...let me know

Hey Kev the gloves are smart rc can be very dirty love the UDR videos keep up the good work and enjoy the hobby

I love watching your videos! Best regards from Sweden.

Lov you channel can’t wait to see the rustler 4x4

Great job Kevin, another great repair/upgrade vid. Glad you got the Center drive replaced with the aluminum one. Mine is great, no issues but I don't go as hard on my udr as you do. I figured this would be a good test for your udr and your bashing sessions. My car isn't a shelf queen, I just don't jump as high as you take your cars.😊 BTW I agree about the aluminum trailing arms. If they break the body or frame, the frame would be a pain in the a$$ to replace..Thanks for sharing dude👍🏿

Good job! Liked the sound effects and music 😄

I am Dutch and love your video's thats why i have subscribed

Love your videos

I think a mini rustler would look so cool

Cool video

Awesome video

Nice video kevin

Hi Kevin. You probably don't read my comments at all. I wanted to say thank you for doing this video on the rear differential. I did this job this morning on my UDR and sealed it like you did. I also, regressed the whole differential. The job worked out well and maybe just because I don't have the body on. I was using my 4s Lipo and was getting my truck on 2 wheels a few times. I am so shocked and totally jagged at the same time! Thank you for putting out this video! It helped out so much!

@KevinTalbotTV

5 жыл бұрын

I try to read all comments dude, glad i could help buddy

@BlueDroneBlues

5 жыл бұрын

@@KevinTalbotTV nice! Thank you good sir for the reply and all your help!

I’m sirprised it looks that good after that burnout

Sweet dude!,

Thanks for your good video and informations

This last sound effect whas just perfect for my headphones

good work.

Cool video because of you I’m upgrading an rc car

Thoroughly enjoyed the pneumatic ugga dugga

I've heard that about the sand but no issues here in California. Informative video. Baffles me on the thumbs down when all you're doing is trying to help people.

kev for silicone lsx (plumbers stuff) is strong and comes in a small tube :)......and dries clear

Love it I like the idea of a four-wheel drive but I run a 2 wheel drive slash low maintenance easy to fix

@racecar8games182

2 жыл бұрын

Udr is already unstable enough with 4 wheel drive

Would you do a quick video going over what all the suspension and drivetrain mods are that you had to do in order to keep it from flipping so much. Just a basic overview of all the mods and a quick explanation of how you did them.

He’s wrenching 😂 another great vid 👍🏻 how did you find the power HD servo I seen you use on another car?

When will you build your own rc car

@KevinTalbotTV

6 жыл бұрын

no idea

@ClarkesMadRcs

6 жыл бұрын

@@KevinTalbotTV if you do then make a monster truck!!

@JoshMB

4 жыл бұрын

ClarkesMadRc's he’s already making a real monster truck 😁

@csdirtsharks6801

4 жыл бұрын

Josh Moore but he’s talking about an rc not a real one

The sand comes in from the wheel hub end I found. I filled the axle with grease to block it 🖒🖒

Hi Kev I am a fan of you and I am from austria

Cool!

nice video

You should invest in a small parts cleaner. I use one from harbor freight it work awesome for my rc parts

I’m sure you’ve heard this before but varsol is better for cleaning plastic because it isn’t as harsh, also simple green is a good one

This is Kevin "I'm gonna just sorry a little bit of brake cleaner on my nuts to clean them up a little" lol

Awesome

seen a few comments on other channels about grit getting inside the transmission, front and rear diffs. So before taking mine out, spent a couple days this weekend tearing mine down and seeing why and if I could prevent this. I think what is happening and probably can't see it unless using a high speed camera to record it, the components flex during impacts, creating gaps between the mating surfaces. How else can you explain particles inside that can't fit between the surfaces normally? For now just a liberal application of Marine Grease before reassmbly is what I am doing. Odd that it has a silicone seal at the rear output of the transmission, but none on the front or either differentials input. Hope your solution works. I also suggest that you find another choice of cleaner rather than Brake Clean. Where I work we have used it to clean up oils and fuels.. when it comes into contact with plastic polymers it has made them brittle and prone to cracking. Most especially polycarbonate.. several pairs of safety glasses and wristwatch faces have been damaged by overspray and splash. Now we just use Grez - Off.

Probably got some silicone sealant in the gears mate, once it hardens bits will break off and gum up the gears. You would of been better off using marine grease.

I like your video

wagwan kev

Rpm said they are about to release udr parts, probably the best option for the trailing arms

Man please tell me that 4 screw wich keeps the both side left and right of the rear dif case. Have importance what way you screw them? From right to left or left to right? Have same holes on boths sides.. has importance?

Sou brasileiro e gostei muito dos seus videos

4:04 don't think a lot of other people would agree

Gpm makes solid parts

So did the sealant and stuff work just got a udr

You may have cooked the motor in the UDR a bit. What do you run for motor and battery setup in that? That might help my diagnosis.

Hi what weight of diff oil and shock oil do you run on your udr thanks

Whee pshhhh👍👍

Very good maintenance TRAXXAS my favorite 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🇨🇺

Kev u could have used those gloves for shopping for food and essentials such as toilet paper. how did you not predict this virus happening and stock up kev :)

Sweet

hi kev i was just wondering i have a helion select four 10sc with a bright green proline ford body on and my rear axle pin has came out and idk what size it is😣 help!!

You need 2nd shocks in rear or not? Can you install and show how much nice is it?

Kevin, can you use electrical contact cleaner like you do brake clean? I have a brand that doesn't break down plastic.

Can u get a wltoys 12428 and then do all metal dears and just put a massive bl motor in it and see what it takes to break it?

Hi friend, I'm from Brazil and I have some questions. I would be very happy if you would help me! I have already discovered that it is necessary to apply grease to the outer gears of the differentials, but I really wanted to know if I should also grease the gears of the engine. Example: 6448 parts: Spur gear, 8985: Input gear transmission, both from Traxxas Maxx. Another question is that the center differential gear comes into contact with a motor gear, should I grease it too? Part 8988. Inside Driveshaft 8949, do I also need to apply grease?

That would be cool if the disk brakes actually worked...you could use a servo and stuff. Kev can you try it out?

Got here fast!

@STEVOD313

6 жыл бұрын

Kev I got my Rustler 4X4 VXL ordered, I’m on the first shipment list, it’s my early Xmas present to myself, 😂 I got my new GoPro hero 5 n gimbal delivery today for my bday present to myself I’m 37 on the 8th

@STEVOD313

6 жыл бұрын

I also did this to my udr when it was new out the box n haven’t opened it up since I’ve ran it, it should’ve been bulletproof right off rip but I’m sure there some type of sand or dirt in there somewhere

Is the rear outer axle bearings pressed on or somethong!?? Thats gonna be fun swapping them out on mine=/

Wait do those brakes actualy works also i think it's cool that you wear gloves it looks professional and I love the sound affects and editing your owesome kev!!!

@beast_slayer-bf9yg

6 жыл бұрын

No thay dont thare for looks

@ClarkesMadRcs

6 жыл бұрын

@@beast_slayer-bf9yg thanks. Now I'm going to cry in a corner

@beast_slayer-bf9yg

6 жыл бұрын

But you dont need a working brake it still has braking

@ClarkesMadRcs

6 жыл бұрын

@@beast_slayer-bf9yg yeah I know lol

8:51 GUN SHOT

Hey Kev don't you have a slash to, if so how does it bash an what do you think about it. You've got so many rc's and I've watched so many of your videos it's hard for me to remember which ones you have and if I've watched a video of it!! LoL.... Awe yeah if you have one what size motor and esc are you running in it!!?? Which is your favorite one to bash with since you got the UDR and the Erevo???? I love the erevo, I think it's a monster for bashing, that's just my opinion though..

Kev, what diff oil do you use in your X-Maxx? If you say "stock", what is stock? I hear 10/30 and some say 30/50? Thanks! I really like your videos!

@KevinTalbotTV

6 жыл бұрын

I can't remember dude

@NitroStarGT

6 жыл бұрын

@@KevinTalbotTV 🤦‍♂️

Hey Kev when is your RC store going to be up and running? Online and you should sell merchandise even if it’s just one shirt

What kind of grease do you use?

I can’t remember.... did you do a GPS speed run pre-burnout?

quic bearn but of my head phones Kev!!!

You should make a special music video with the traxxas udr, looking as scale, real and smooth as possible 👍

Dont worry i wear gloves too

The sand is getting in the diff through the axle tubes..Fill them with utterbutter grease..

Which is the dificultiest rc car to fix?

Instead of using silicone seal you can just use any grease to do the same thing. There will be no water and dirt, but there is much easier to work with grease, instead of sealing🤷‍♂️

Vid idea : make a flying ish rc car!!

@Kyle-jb3hr

5 жыл бұрын

Lol that's the majority of his bashing videos

How dose one get a screw that is stripped on the inside of head

What’s up Kev, can you do a trx4 bash again? 👍

Love the impact gun noises lol Also just a heads up, brake cleaner is really bad for you be really careful not to breathe it

ha ha just put on a new glove Kev y"ll b alright i didnt think anyone else was willing to use sealer on there RC , cheers Bro

I repaired Diff and Planetary and I noticed a decrease in speed. Did you experience the same?

Kev you should do udr vs the slash

My rear axle seems to wobble abit and connection to the diff is also seeming loose

What is the drill you are using

Do you not need oil in there?

Kevin, whats mean digits on DeWalts ?

muito bom;

Tip! Clean the outside before open it.

does anybody have a link to kevins ebay i would like to buy some stuff from him