Anything original and even old school aftermarket is worth passing on to another.

The Stable! I like that!.... Good job!......LOL!---->>> Get Sarah n tuned to wear that shinny spring on her neck... LOL!

Coming along nicely. I bet it’s lots quieter in there without Sarah making her songs. Angel zone there’s a name for the shop. I think someone beat me to Angel cave. Have a good night

@rookie__pilot

Жыл бұрын

Thanks Darren!

As you began cutting all I could hear in my head was SlipKnot 😂 “ Cut cut cut me up and…. 🎵🎵🎵 “ I would love to see you and Sarah go head to head when your builds are finished . Now that would be 🔥

@rookie__pilot

Жыл бұрын

Great idea 💡 😂

Looking nice. Keep up the good work.

@rookie__pilot

Жыл бұрын

Thanks!

Angel Food Cave! I'll call it the Glue Factory.

@rookie__pilot

Жыл бұрын

I like that 😎

Well done AFC Stable!!

@rookie__pilot

Жыл бұрын

🤘🏼

I'm really enjoying this build. Brings back memories and the learning curve that came with it. Replaced coils on my 66 Pontiac Parisienne complete with side skirts ...4 door hardtop 283 2 bbl. 2 speed powerglide tranny. Car was only 4 years old.

@rookie__pilot

Жыл бұрын

I really appreciate it Gary! Thanks sm! Definitely learning something everyday, wow for a 4 year old car that sounds fun!

I love these kind of mods so can't wait to see how you do it. Looking forward to the progress.

@rookie__pilot

Жыл бұрын

You and me both!

Bro! This is such a great video! Can’t wait to see more progress on this project!

@rookie__pilot

Жыл бұрын

Thanks so much!

Awesome video thank you for sharing 👍

@rookie__pilot

Жыл бұрын

Thanks Ernesto!

I laughed so hard at your shock removal! I didn’t realize I needed that. I saw the 4 wheel drive ‘65 Mustang today at Tampa Bay Automobile Museum. It’s awesome. Thanks for this.👍

@rookie__pilot

Жыл бұрын

Haha! Glad you had a laugh! Id love to check that museum out one day👍🏻

nice personal protective equipment.

Hi Angel! Very good video! That’s going to a great handling Mustang! Thank you!

@rookie__pilot

Жыл бұрын

Thanks Graem!

I'm jealous you can actually get work done on the Mustang. I've been struggling to fined a place to build my project car. A few years ago I purchased an almost identical front suspension kit for my 1970 2dr Ford Maverick coupe. Unfortunately in Vancouver BC were I live shop space is insanely expensive. It's like paying a house mortgage. The average home price here is over a million dollars. Ok I'm done complaining. Looking forward to seeing more progress on the Mustang 👍

@rookie__pilot

Жыл бұрын

That’s unfortunate! Im lucky to have found this spot or else i would still be working out in the az sun. Thanks for your support!

Angel Food Cave was gold! The Stable is acceptable, though.

@rookie__pilot

Жыл бұрын

Haha those were my top 2!

your editing is really great! Loving the work - but most especially, your authenticity in showing us how excited and happy you are to be doing something you've never done before! Always encouraging to me. Wish there was a video all the time, but i can be patient. At least I see you on Sarah's channel in between your uploads! :P

@rookie__pilot

Жыл бұрын

Thanks so much Nik! I love making these videos, its so nice to hear you want more frequency. I try to fit in as much time after im done working with sarah to make my own videos, im now fully set up at my shop and hopefully will be posting more often!

Very enjoyable video =)

@rookie__pilot

Жыл бұрын

Thanks John!

That car is really solid!

@rookie__pilot

10 ай бұрын

It will be an awesome street car soon!

Looking good....i dig your cut-off music.... Welcome to. Stang 51 area...yes most of your subscribers will get the duel reference....lol...have a great weekend...

@rookie__pilot

Жыл бұрын

Lol! Thanks Robert, you too👍🏻

Those panning time-lapse shots were the coolest.

@rookie__pilot

Жыл бұрын

Thanks Nick!!

"Cut my front end in to pieces, this is my 3rd Po-nee!" Impressive, Rookie Pilot. Never seen a Mustang II front end build install, other than replacing parts on a Mustang II. Not the same as this! I am not a mechanic, merely a parts changer. I have installed engines, transmissions, interiors, sound systems, water pumps, etc. This is something I always wanted to do, Life just got in the way. Great video! Gonna watch this channel blow up!

@rookie__pilot

Жыл бұрын

Thanks for the kind words! Im learning something new everyday with this build. Sounds like youve done plenty of intensive jobs 🤘🏼🤘🏼

That good stuff

@rookie__pilot

Жыл бұрын

Thanks Jason!

First video of yours I have seen. I've got a 68 coupe I am working on restoring with my son. Never done a resto before so I'll be checking in from time to time to see what I can learn from your channel. Step on is full floor pan replacement and rear 1/4 panel. 😬

Sharp haircut my man looks ace . Building my shed ready for the winter in the uk 24ft/21ft big enough for a couple of projects and a daily. Loving the content JX

@rookie__pilot

Жыл бұрын

Hell yeah! That sounds like a great workspace !

@Stahodad

10 ай бұрын

..if you haven't already, try to build in some overhead storage if possible , to store parts you takeoff..

Leave the nut holding the steering wheel on a few turns that way when you pull on it it won’t meet your face when it comes off. Great video.

@rookie__pilot

9 ай бұрын

Funny story, that has happened to me already lol. Funny story pt2 is the steering wheel puller bolts broke inside the steering wheel bolt holes. So it ended up coming out with the angle grinder. Thanks !!

Great video 👍🏼

@rookie__pilot

Жыл бұрын

Thanks Gerardo!

Dear A.R.P. 👍👌👏 I simply love to see you having fun. Congrats again for having your own shop... excuse me... stable! 😁 ;-) 2) Please don't use an angle grinder without the spark protection. If a piece of a broken cutting disc will fly off, it can easily turn into an "Angel grinder"! And we definitely don't want to see you getting hurt. Additionally: As a utuber doing things in public, you have a much bigger responsibility. A lot of people will see you as a kind of role model and simply copy your behaviour. A ton of utubers simply don't realise this fact. Thanks in advance for consideration. 3) I'm pretty impressed about all the modifications you do on the front of the car (although it already had disc brakes). I'm eagerly looking forward to watch the next part. As always: Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health in particular. Post Scriptum: I tried very hard to resist but I simply couldn't help to comment the following: I always wondered why you wear a baseball cap all the time (and even the other way around). But after showing us your fresh haircut (what I would rather call a pretty heavy accident), I now exactly know why! 😁😁 ;-) Just joking... although.... 😁 ;-)

That cutoff tool comparison was great.

@rookie__pilot

Жыл бұрын

Thanks David! Thought it might be useful to somebody

I like the not removal method. It's quick and easy.

@rookie__pilot

Жыл бұрын

Haha yes! I did that 2 times, time to spice it up

Pitman notoriously stubborn. Cut cut cut. 🎉

@rookie__pilot

Жыл бұрын

Its going to meet the cutoff wheel if it doesnt do what i say lol

Nice to have your own shop that isn't full of bodywork dust😃. I like the approach this is how I do it, though the springs coming out was less dramatic than I was expecting.🤣

@rookie__pilot

Жыл бұрын

Not yet atleast lol. And me too i wanted something a bit more explosive 😂

It's not stupid if it works😂

@rookie__pilot

Жыл бұрын

You got that right Frank!

It actually looks safer than the compressor tool way lol 😊

@rookie__pilot

Жыл бұрын

I think so aswell lol

@zanstrom686

9 ай бұрын

Yeah, it looks like that's the way to do it.

Nice camera moves with your motorized slider on timelapse!👍🏾And +1 for “All along the shock tower”!! Well done.

@rookie__pilot

Жыл бұрын

Thanks! Its super neat, i love the slider

Good video, sir! Lots of magic going on in that shop, with the disappearing fenders and hair! 😁 Glad to see you wearing hearing protection. So many KZreadrs don't wear any...I like listening to my tunes at full range till I'm old. But that's me.

@rookie__pilot

Жыл бұрын

Thanks Zack! I love blasting music aswell, but I definitely dont like the grinder noises 😂

The end result is all that matters great job so far 💯👍

@rookie__pilot

10 ай бұрын

You are very right! 👍🏻👍🏻

I had a '66 Mustang that needed the driver's side shock tower removed and replaced. I drilled out Every. Single. Spot. Weld. I like your way much better. I also tried to remove the steering wheel without a puller. I was successful, but my nose paid the price. Have fun and keep up the great work.

@rookie__pilot

Жыл бұрын

Oh no Frank, i feel your pain 😂

Great video. It's very will put together and I think you do a great job explaining the steps you are doing. Glad you have been able to find yet another Mustang to restore!! Also great pick for the shop name. Keep up the great work I can't wait to see this done!

@rookie__pilot

Жыл бұрын

Thank you Michael! I try to improve with each video, thanks for your support!

I like your style Angel! And remember, if it works, is it really a bad idea! Keep up the great work!

@rookie__pilot

Жыл бұрын

Youre right Jim! Thanks for the support!

I might have to try out your method on removing fenders! Let’s see if it’s as easy 😂 also love your videos and I’m always looking forward to the next! 🎉❤ so proud of you.

@rookie__pilot

Жыл бұрын

YOU ARE A SWEETHEART❤️

Very nice camera work, love the moving timelapse. Looking forward to the new upload.

@rookie__pilot

Жыл бұрын

Thanks !

LMAO 😂 removing coil springs in the not how too way🙌🙌💞💯 be careful and stay safe👃

@rookie__pilot

Жыл бұрын

Haha definitely my favorite way😂

Hey AFC, Never had my own shop, but I can remember when I bought my house and I had my very own garage. That was an awesome feeling as well and those Pitman arms can be a real bitch. That’s probably one of the few things that is still original to the car they usually don’t need to be replaced unlike Tire rods, and the idler arm. The last Pitman arm I removed was on there so tight that when I popped it sounded like a gunshot. Looking forward to the build have a great one.👍

@rookie__pilot

Жыл бұрын

I wish my house had a garage! At this point anything that wont come off is meeting the angle grinder lol. Thanks for your support!

I myself bought me a low buck 40 amp plasmacutter, that works just fine. If you think how much money you spent on cutting discs, it pays for itself. Now recently I saw a plasmacutter(down here in Europe) with a built in compressor for 200 Euros, so even if you don't have a decent air compressor, there's options. Keep up the good work young man!

@rookie__pilot

Жыл бұрын

That makes sense when you put it that way! Thanks!

Nice work Angel!! The camera shots are looking pro, as well! 👍

@rookie__pilot

Жыл бұрын

Thanks!

nice!!!!!!!!!!!!!!!!!!!!!!!!!! dude cake

@rookie__pilot

Жыл бұрын

Thanks frank!

@happyplace00

Жыл бұрын

@@rookie__pilot love your work

Looking good. Maybe weigh everything you take out compared to what you’re installing, to see how much weight saving.

@rookie__pilot

Жыл бұрын

Thats a great idea!

I was expecting those springs to go flying across the shop and embed themselves in the wall after all the safety precautions I've heard.

@rookie__pilot

5 ай бұрын

Thats what i was expecting also 😂

I'm learning a lot, thanks for sharing, "All along the shock tower" hmm, sounds like I have heard that somewhere before. If you want to sell the 150 pants let me know. Cheers!

@rookie__pilot

Жыл бұрын

Thanks Randy! Ive listed them for sale a couple times but now im starting to grow attached to them lol

I could use those front disc brakes!

@rookie__pilot

Жыл бұрын

Message me on instagram!

If you will leave the steering wheel nut on a few threads, the wheel won't punch you. ;)

@rookie__pilot

Жыл бұрын

Lol yes!

You could always put it back later

@rookie__pilot

6 ай бұрын

Right😂

did you get rid of the 5 lug disc brakes set up?

@rookie__pilot

11 ай бұрын

Still have the spindles and brakes

omg my 68 project is missing all the parts you took off - can I pick them up? Thank you so much

@motomalibu832

Жыл бұрын

assuming you're less than 150 miles from LA area

@rookie__pilot

Жыл бұрын

Not sure what will fit from these parts, most likely the spindles. Im in southern az

@motomalibu832

Жыл бұрын

@@rookie__pilot I actually ended up buying a 66 Mustang project which comes with drum brakes so the disk brake setup would work. Arizona is far but let me see how much UPS ground would cost. The main part I need for the 66 is the quarter panel driver side rear

does this mean sarah has to edit your videos !!

@rookie__pilot

Жыл бұрын

Lol, i wish!

So there's still room for my pony in your stable

@rookie__pilot

Жыл бұрын

Yessir!

Where is the your tatooed lady?