I've got a wood boat, I prefer pine annodes.

Thank you ,clear explanation👍👍👍👍

Thanks for video

Well explained thanks

Electron current doesn’t pass through the electrolyte, only metal ions dissolve in the sea water . Its a very important point and i hope that it gets confirmed by anyone because i started doubting my self

@georgehatz5927

2 ай бұрын

You are correct, there is only chemical action occurring between the metal(s) and sea water, not electrical action.

Very informative💯

Very well explained !

@marineinsight

3 жыл бұрын

Glad you found the video useful. Please do share and support 👍

Thanks for explaining very good.

@marineinsight

3 жыл бұрын

Glad it was helpful! Please do share and support 👍🏻

Very well explained. Is it possible to have an ICCP solution for a metallic roof?

Great explaining....thanks a lot.........!

@marineinsight

3 жыл бұрын

Glad it was helpful! Please do share and support 👍🏻

thank you very much.

@marineinsight

3 жыл бұрын

👍 Thank you for your comment

VERY GOOD JOB SIR. I SAW A HAMMERHEAD SHARK WITH IT'S HEAD AGAINST THE HULL,HE WAS VERY HAPPY.

How we can check zinc plates and where we must put cathode anode in engine room bottom?

The anode (e.g., Zn) is where oxidation occurs and the electrons produced are transferred to the hull (e.g., Fe), which is why the hull is called the protected cathode. Right? But what is being reduced? Fe in the hull? Doubtful. So, are the electrons are just being routed through the hull back to the "anode". I don't understand what is being reduced. Is the Zn2+ produced in the anode being reduced back to Zn? If so the the terminology leaves something to be desired since the cathode should be where some reduction is occuring.

Is it okay to install the sacrificial anodes on already painted steel surface? Or do we need to grind the surface first before installation?

@JeremySteamsack

3 ай бұрын

You need to grind the surface before installing. Having a reliable electrical contact with low resistance is critical

Nice One! Whether for this ICCP do we need a Electrolyte to present?? I am looking whether this process can be used in Trucks or auto mobiles to prevent corrosion??

@marineinsight

3 жыл бұрын

Yes

But sir control panel will measure only the corrosion current between the particular metal, here in our case plantinum and it will be more as compared to anode?? Then How the slightly the more current wil protect the anode??

GOOD

@marineinsight

3 жыл бұрын

👍

Hi! :) can u make a video of what are the things we need to do during a sea trial? "container ship" Great explaining bro!

@marineinsight

3 жыл бұрын

Will do soon

Please can you name out the problems faced in marine industry especially in case of vessels.. Which have no solutions and remedies yet till now... And which are still an issue for marine industry..

@marineinsight

Жыл бұрын

We will work on this topic

Fully understood how ICCP protects corrosion by keep the metal hull negatively charged (feeding electrons to it, correct me if wrong) but this only resolves between seawater and steel (cooling system and hull). Can't find a good explanation how this works against sea creatures growing/sticking on the hull. Is the impressed current strong enough to shock them off? Anybody?

@ivankukuljan7282

2 жыл бұрын

No, ICCP is not used to prevent marine growth. This is done by means od anti-fouling paint on the ships hull. But for pipes that lead sea water througt metal pipes we use Marine Growth Prevention System so that the valves, pumps and inside of the pipes dont get plugged.

Bilkul bekar samjhaya apne

@marineinsight

3 жыл бұрын

Please do provide feedback on how to do it next time

@AmanSingh-hq7do

3 жыл бұрын

Sir language used was not simple artificial anode to Samajh aa gya iccp thoda Lehman language mai samjhate to acha rehta Regards

@simr5010

3 жыл бұрын

@@AmanSingh-hq7do you're right bro