My rear derailleur cable did this on my last 40 mile ride…..shifting had become erratic and it finally gave up. It had been awhile since I’d done one of these. Thanks to your video I went ahead and did all four cables just in case. Thank you, great video.

Used this video yesterday, saved me loads of time thank you! I needed to remove the lower piece of plastic too to get the broken cable head out.

Excellent video - just the detail I need. Thank you so much.

ok not much new here except one key piece for me. The finger nail pull back of the flap without removing it starting at 6:10. Man, that saved me so much effort and time.

Perfect explanation. I fixed everything by my on also the rests of the broken cable. Thank u

Followed the video today made the job simple thank you for sharing

Thanks, mate. I just found your video and resolved my problem exactly as you've demonstrated. You've saved me an expensive trip to a bike shop. Top bloke :)

@theoverengineer

Жыл бұрын

You're welcome!

Thanks for the excellent video! My new years day project before kids wake up 😁

Excellent! You are a lifesaver, i managed to get that broken cable head out thanks to this video. Many thanks!

@theoverengineer

Жыл бұрын

You're welcome!

This was really helpful, thanks for posting. Feel like I need to do my lawn now, not sure why 😉

@theoverengineer

2 жыл бұрын

Glad it was helpful!

Woooooooow save me lot of money two shops told me I needed new shifters. I remove the boat like suggested in the video in the old cable was still there. Oh my God thank you for this video.

@theoverengineer

10 ай бұрын

Glad it helped!

This is very helpful video. Thank you,

Very usefull close ups!!! Thank you!

Thanks so much got it fixed

Great job many Thanks

Great video thanks

Great video, Thanks!

@theoverengineer

3 жыл бұрын

Glad you liked it!

Very good thanks.

Thank you a really good video, and nice explanation

@theoverengineer

8 ай бұрын

Glad it was helpful!

Here is the next video to show to set tension?

My screw has rusted, i cant open that bottom panel. Any tips? Great video

@theoverengineer

Жыл бұрын

Oil? + patience ... awww ... it's a tricky one. Just don't butcher it, you need all the metal remaining in the screw head to turn that thing, eventually ...

Good

ALR is not a carbon frame

Ah but now I have removed the broken end of the cable - like yours - from underneath, but the ratchet wheel will not turn.

@theoverengineer

3 жыл бұрын

Ouch. Keep looking, a bit of broken wire strand is stopping it.

@caahacky

3 жыл бұрын

@@theoverengineer I found the problem! The rubber hood cover was contacting one of the ratchet pawls and stopping the wheel turning - because I had removed the round plastic cover underneath to get the broken end out. Thanks again for the excellent video.

@usafmd

2 жыл бұрын

I had the same problem. Turns out the rubber hood needs to be flipped back for it to work! Thanks to my friendly LBS!

Excellent video but man get yourself a workstand! I cringed when you turned that bike upside down.

@theoverengineer

3 жыл бұрын

(Was done at friend's place, I only carried the tools I needed. And camera)

Too slow, not requiring such a long video.

@theoverengineer

3 жыл бұрын

I know, was too lazy to edit raw footage down. Thanks for visiting!