Great Series Gerard. Your fences are superb.

If foam gunk builds up in the little hole, you can also just put a few drops of acetone in there to clean it out.

Gerard, I'd be first in line if you designed a better hotwire table compatible with all your tools. Maybe a kickstarter?

@littilittiti1272

Жыл бұрын

Second☝🏻

@littilittiti1272

Жыл бұрын

Hightadustable and turnable arm, Temperatur, and many other things.... Höhenverstellbarer Arm, Drehbarer Arm, Deine Werkzeuge zum direkt einsetzen in das Gerät, z.B. wie an einem Schweißtisch über Bolzen (welding table), Temperaturkontrolle, vergrößerbare Arbeitsfläche, Beleuchtung an der Spitze, evtl. ein laser wie bei einer Kappsäge, Luftabsaugung (für die Dämpfe)....

great video. Very good explanation of the basics. Thanks very much

Excellent primer, Gerard. Nicely done

Great tips, great viedos

I liked and subscribed. I’m happy with the tips again and yes, my wire went bzzzzzzzzz when I took the tape off.

I love the jigs you make for this cutter the guider Pro has long replaced the factory fence. I would suggest to find a way to put the guide on and have a way to lock it down I use a paper towel to make the fit tighter so the precure does not move the guide back

I hope someone from Proxxon is watching..........

great vid m8, just liked and subscribed... looking to get my very first proxxen machine and came here for some much needed valuable info...didnt even know what a guider was lol, such a noob, cheers tho..

Hello Gerard, found you first at tabletop basement TV, but love your Videos, Tutorials and tipps! Merry christmas to you and your beloved people. Stay healthy Michael from Saarbrücken, Germany.

Dir und deinen Lieben ein Frohes und Besinnliches Weihnachtsfest und ein Tolles 2023. Gruß Detlef

Another very informative video, Gerard! I've had my Proxxon for a good few years now and it is such a great tool.

Hello Gerard, Thanks for the video! Merry Christmas to you and your family🎄

Nice GERARD! Fijne feestdagen, je ter apel maat!

Thanks for the vids Gerard, its whether you know tips like these ones that can make or break your enjoyment of this hobby especially if you are time poor and are unable to experiment to find out what may be wrong with the machine or the technique you use. Thanks for sharing and I'm really looking forward to the next vids, Merry Christmas!

On my Proxxon thermocut there is a sticker on the dial whit numbers painted in white, so it is easy to set the temp, probably they added it on newer batches.

@Shiftinglands

Жыл бұрын

yes I can imagine they done so. Certain I am not the only one that has a hard time reding these numbers.

@VGModelling

Жыл бұрын

@@Shiftinglands The angle of the wire on the side is slightly off on my though, I noticed after watching your video, probably the arm is bent :(.

Do you think you could make a video explaining how to use Tool No. 5? I nearly bought it today but was cautious bc I’m not sure what all it can do.

@frankseiler2417

Жыл бұрын

Only in german, but I hope it helps anyway : kzread.info/dash/bejne/lIKXucyjpaveaKw.html

Disculpa vivo en Colombia está cortadora se consigue acá en Colombia junto con las plantillas?

Hi Gerard. Do you recommand wearing a mask to prevent breathing the fumes when using the Proxxon? Thanks for your help.

@Shiftinglands

4 ай бұрын

When working indoors I suggest at least to make sure a window is open / working close to a window that is a bit open. That should be enough.

Is het nog van belang hoe strak de draad is? Met een blok snijden gaat het prima, maar ik merk dat als ik bv de pilaar tool gebruik, dat het heel lastig is om de uitsteeksels precies te volgen. Of is dat gewoon kwestie van vaak doen en wordt je er vanzelf handiger in?

We really need an open source alternative to this tool. It's ridiculously overpriced and proxxon don't improve the design over the years. The community need to create its own alternative to the proxxon.

@beauparsons6662

Жыл бұрын

Surely we can bribe some electrical engineering students or design students to tinker with this idea...

Does this have the regular plug for USA