No video
Sheet metal tutorial | Rip flange & Split Area in Creo Parametric
Let's understand the basics for sheet metal design by designing this part in Creo Parametric
Sheet metal UNBEND
• Sheet metal tutorial |...
Transitional unbend
• Sheet metal tutorial |...
Crossection driven unbend
• Sheet metal tutorial |...
The basic sheet metal design
• Sheet metal tutorials ...
Пікірлер: 28
Thanks bro it's really helpful
In sheet metal if u choose extrude it ill come like walls but u got solid in second half
How to make split area in curvedsurface
sir, in this part we can also create flat by tangent radius for deformation area , which will we the correct flat for practical accuracy?
@CADxTraining
3 жыл бұрын
Both method are ok. You can go with anyone.
could you please make a video on weight calculation in creo and adding it in drawing?
@CADxTraining
4 жыл бұрын
kzread.info/dash/bejne/iH2ayMGDZaaXfrA.html
@surajkale6499
4 жыл бұрын
@@CADxTraining thanks......could you please explain bend allowance tab in creo and how to calculate flat development length from bend allowance for the manufacturing of sheet metal part ( laser cutting of flat sheet)
There you had 3 lines only then how it converted into rounded corners?
@CADxTraining
4 жыл бұрын
Creo automatically add bend radius for all bend corners. You can control the size of the bend round.
@nisarghajari7499
4 жыл бұрын
@@CADxTraining how I can do that ? Any link of your video? I am using creo 4. Which version of creo you are using?
How to make split area in curved surface
@CADxTraining
4 жыл бұрын
Split area only works with the surface created in sheet metal environment.
@villageboy9424
4 жыл бұрын
@@CADxTraining sir, please make one video for split area options in curved surface
sir, while creating the flange(@3:48 ) a gap is formed while selecting the other edges for flange and cannot be cleared by decreasing the size
@CADxTraining
4 жыл бұрын
Increase the size of the bend radius for the previous feature first. Keep the bend radius 5 times the thickness.
@vvvipin1
4 жыл бұрын
@@CADxTraining THANK YOU
@vvvipin1
4 жыл бұрын
sir, where can we get creo practice sketchs or drawings for both sheet metal and part modelling(for practice)
@CADxTraining
4 жыл бұрын
Take the snapshot in HD resolution
@bittusharma2312
2 жыл бұрын
Its not going above than 2 times the radius what to do please tell
Sir I have doubts
@Dharma126
3 жыл бұрын
This 60 vedio have all tools explanation in sheet metal ??
@CADxTraining
3 жыл бұрын
Yes
In this video your part is solid but it's look like surface part ( bluish) colour. Why
@CADxTraining
2 жыл бұрын
It's just a appearance.
@ajayn4480
2 жыл бұрын
@@CADxTraining ok. Any video related to analysis
I really love your videos, can I add you in skype ?
@CADxTraining
4 жыл бұрын
You can ask any doubt anytime. You can write your doubts in the comments below. Sorry about the Skype.