Thanks a lot for your terminal tutorials, they are especially useful for me. I would appreciate more tutorials of this kind

What a trick to unbend. I have never seen such a useful technique. Thanks for uploading.

Hi sir, you are very talented. Thank you for share the wisdom.

Thanks for your great work

Thanks a lot, sir!

U r great sir. Love u

Superbbbbb sir .....share more videos

Great!!!

Thaks a lot!!

Cool

Hello sir great work. please make electrical housing assembly please

Thank you very much sir kindly add some more videos of cable wire terminal

@CADxTraining

2 жыл бұрын

Watch this. You will get some ideas. kzread.info/dash/bejne/lIKL0tKBkbzgddI.html And kzread.info/dash/bejne/pqGbybqQnZm5m5c.html

Hi Satyendra, I would like know the shortcut which you use and in which Template you create the models mm-asme or inch-asme. Thanks🙂

@CADxTraining

3 жыл бұрын

I have used inch-asme. This is for shortcut. kzread.info/dash/bejne/pYiAk4-HgNGnidY.html

What a commendable job, Sir! If I'm not asking too much, will you please upload drawings of every part in this assembly? Thanks in advance. 👍

@CADxTraining

Жыл бұрын

You can take a snapshot for the drawing from the video. Play the video in 1080p and take a snap shot.

@HashimRaza7

Жыл бұрын

@@CADxTraining Thanks

sir you selected the sheetmetal at first, but there is no sheetmetal header in the header section

Sir, how you insert side drawing image in creo ?

@CADxTraining

3 ай бұрын

That is done by video editor

Hi Sir, Need your support to do the same model in NX sheet metal

@CADxTraining

3 жыл бұрын

Sorry Naveen, I am not familiar with NX.

What metal is used to make the connector and plastic is used in the end?

@CADxTraining

8 ай бұрын

The most common material used as metal is copper alloy and insulating material as nylon.

@jimmatrix7244

8 ай бұрын

@@CADxTraining Thank you. Excellent skill and knowledge.

Dear sir I am try to unbend revolve cylinder base how to solve

@CADxTraining

2 жыл бұрын

kzread.info/dash/bejne/rG2X0dJrdcy7ZKw.html This will be helpful.

Sir why it is not possible to unbend as u did in the unbend 1st video..(by selecting deformation options in unbend feature) Please tell when we have to use split option to unbend the Sheet when it is not possible in common unbend option..🙏🙏🙏🙏

@CADxTraining

4 жыл бұрын

These are the two different techniques in creo parametric for sheet metal design. Now in this video I have used split area because the part must have continuous split surface to use deformation technique as the 1st part is. This part doesn't have continuous split line end to end.

@naveena3262

4 жыл бұрын

Sorry sir I am still confused, I don't know which is continuous split surface pls help me out.

@CADxTraining

4 жыл бұрын

You see the flat pattern of both the part. You will see a continuous curve starting from top to bottom in first part but that curve is missing in second part.

@naveena3262

4 жыл бұрын

Sir, could u please add a short explainations of this doubt in the upcoming videos 🙏. And also please tell, in what way the surface should be split(in this video u drawn a line horizontally) to achieve unbend and y it isnot possible to achieve unbend when we draw vertically?

@CADxTraining

4 жыл бұрын

We draw the split line, normal to flatten portion.

Brother you do know a lot of things in sheet metal modelling undoubtedly but your drawing making is just below par....your views aren't understandable & dimensions are missing