Shark Rocket Lower Hose Replacement
Тәжірибелік нұсқаулар және стиль
Installing an "OYSTERBOY Replacement Parts Value Pack 2Pcs 1 1/4" Floor Lower Nozzle Hose Compatible with Shark HV300, HV302, HV320, HV321 Rocket Vacuum"
Amazon part number B092HHX9GL
Require T15h Screwdriver
0:00 - It's back !
1:17 - Taking it Apart
1:39 - Tool Required, Screw Removal
2:45 - Gently Pry Apart
3:20 - Disconnect Wire
3:33 - Removing the Tube
4:53 - The Replacement Tube
5:40 - Installing New Tube
6:42 - Putting it Back Together
7:26 - I did something wrong
7:39 - Reseating the hose
8:27 - Back Together, Test
8:44 - Closing Thoughts
Пікірлер: 16
not gonna lie. This is just what I needed. You are actually hilarious, and seemingly without even trying. Love it. Thanks.
@DATT
21 күн бұрын
Hah, thanks !
I love this video!! I disassembled my vacuum right along with you. I have to wait 3 days for my houses but at least it's ready and clean waiting on them! Thank you so much! This old girl appreciates you. 😃
@DATT
2 ай бұрын
Nice! You're Welcome !
I fixed mine and I have a tip!! 😊 I cut my hose down to where the threads perfectly matched the threads of the old tube, it’s just slightly longer and the threads are a little off, once you line it up and trim it down, it slips in perfectly!
@DATT
12 сағат бұрын
Oh ok yeah, you could totally change the timing of the threads that way. Good Idea !
Good luck on having those special screwdriver heads handy. Most normal people don't have em'. My suggestion is...shit-can the POS and just get another vacuum (different brand). I noticed even YOU had a fun time putting the damn thing back together...Most of us would barely remember how to put it back together....But thanks anyway...perfect for the pro...not us dummies.
@DATT
28 күн бұрын
Yeah eh, I guess it can be tricky.
This was very helpful, thanks. The Torx screwdriver set I ordered from Amazon has shanks that are barely long enough for the task, and the broken flex hose seemed to be screwed on at either end a bit misaligned so screwing it off was not possible and I had to basically rip it to pieces at either end, but overall the task worked just fine as i followed your video.
@DATT
12 сағат бұрын
Oh, tight fit ? Well, sometimes chopping the old part to get it out is just the way it goes.
Mine is orange… but it looks the same I hope this works 😂
@DATT
8 күн бұрын
Yeah, I can't be sure myself. I put in the description the models this is suppose to be compatible with.
Mine has regular Phillips screws. No security screws. 🤷♂️
@DATT
Ай бұрын
Oh nice. I wonder if yours is a new or older one.
@KevinHurley-np1gs
Ай бұрын
@@DATT On the brush roller cover it says 2006. Wow I’d say that’s old. 🤣
@DATT
Ай бұрын
@@KevinHurley-np1gs Yeah eh, I'll have to ask how old this unit is.