Die Folie sieht gut aus an den Shad Koffern👍👍👍👍

Great job Andy! No more words! You nailed it! ... even if the color is not that close of the original one from Kawasaki!

@MotoAndy

14 күн бұрын

Thanks 👊

I have them 3 months now and I am very satisfied with them.Perfect price and quality versus oem.I also have the sh58x top case.I think these are the only ones that fit so nicely to the appearance of the bike.

Nice job Andy! 💪👍 I’m happy with my original panniers. Can pack more luggage than with my old panniers on my former Sprint ST1050.

Hi Andy. Thank you for your video, always great. I opted for Shad luggage for my Versys 2015 instead of Kawasaki's. So, it's been 9 years (I don't like changing bikes much, especially when it suits me well) that I've been using these cases with the 48-liter top case. I've gone from scorching heat to rain to hail... and I've never had a single drop of water inside. The set is sturdy and durable. So much so that my son steals them to put on his bike when he goes for a ride. You made an excellent choice, much cheaper than the Kawasaki set. Like you, I regret the color; my bike is orange... but I'm going to steal your idea. Safe travels.

@MotoAndy

22 күн бұрын

thanks for this comment, I was a bit worried that these cases would leak, that little seal inside doesn't look trustworthy. But since you've been using it for 9 years and it's always been dry, it calmed me down a bit. Thanks

Andy, I just loved it. Congrats on your solution to get a little bit mor space

Nice video Andy. I was running these very same panniers for 3 years on my NC750, before I upgraded to Versys 1000. Nice and waterproof panniers. Not a single drop of a water inside and i was riding in torrential rain in Germany for 8h. BUT, i couldn't get in my modular helmet, while in the Versys OEM panniers, helmet fit nicely. And for my travel 28l x 2 is ok as well. Regards

@MotoAndy

18 күн бұрын

thank you 👍

Looks good considering that's the first time you've used vinyl wrap. It's harder than it looks, the key is working it carefully with heat and stretching over the curves, but it's very tricky across multiple curves. Even the pro's hate working on motorbike fairings as the curves are so much more complicated than car bodies, but those little panels came up nicely :)

@MotoAndy

19 күн бұрын

Thanks. You're right, it's not an easy job and I don't think I'll ever do it again.🤨 Stay safe.

Deshalb habe ich meine orginalen Seitenkoffer auch verkauft . Sehen gut aus mehr aber auch nicht . Habe jetzt die von SW Motech und bin sehr zufrieden.

Next episode: Andy’s paintjob, ‘coz he hates the wrap 😂

@MotoAndy

21 күн бұрын

😂

Allo MotoAndy I own a Versys like yours and I'm agredd with you about the Kawasaki luggage.. to replace them i choosed GIVI Alaska Trekker 36 lt for each side and back I choosed a Outback 58 liters. You can see the on my you tube channel 😀. Of course I bought alos the inners bags which are waterproof.

@MotoAndy

6 күн бұрын

It is looking good and I`m sure it is handy when you travel with passanger, just for me it`s to much place to keep to much junk, if you know what I mean. Be safe my friend

Zajebista robota 💪😉 Też mam problem ze znalezieniem odpowiednich kufrów, zastanawiałem się właśnie nad tymi,a Ty skutecznie mnie do nich przekonałeś😊 Wielkie dzięki za film,jak zwykle pełna profeska 👌💪😉 Pozdrawiam serdecznie 😉

@MotoAndy

22 күн бұрын

Dzięki, jeszcze ich dokładnie nie przetestowałem, zrobiłem tylko kilka jazd próbnych, jak Ci się nie spieszy to poczekaj do sierpnia wtedy będę po wyjeździe to będę mógł powiedzieć coś więcej o ich użytkowaniu. Z drugiej strony jak przejrzysz komentarze poniżej ktoś pisał że używa tych kufrów od 9 lat i nigdy nie miał kropli wody w środku, więc o czyms to świadczy. Trzym się

@Marcinciecierski629

22 күн бұрын

@@MotoAndy no to pasuje,w sierpniu lecimy do Holandii na motocyklu oczywiście 😁więc będzie okazja pogadać o wadach i zaletach 😉

Thanks Andy!

@MotoAndy

22 күн бұрын

Your welcome

Thanks Andy..👍😊

@MotoAndy

22 күн бұрын

Your very welcome..

Good video, wish it had been posted a few weeks ago before I purchased my Versys, I would have considered buying a bike without the cases and doing this. But for now I will see how we get on with the Kawasaki cases, we are going on our first tour on the Versys in a few days time.

@MotoAndy

22 күн бұрын

I also wish someone had made a video like this sooner, and for the same reasons. You can always buy shad or other cases and put the originals in the closet and wait for the motorcycle to be sold, then you will have a motorcycle for sale with brand new cases. Or you can just sell them, there will definitely be a buyer. Take care..

I also remade Shad brackets but more radical than you. That part which is connected with pegs I cut down to change all the bottom part to put the original decorative plates back. It was necessary to connect everything again with two bolts like it is in orignal.

@MotoAndy

19 күн бұрын

Yeeep. we weird people need to make things better 😂. Take care

I have the stacked headlight Versys 1000. Givi luggage is nice and normal.

Awesome! Thanks Andy😃

@MotoAndy

22 күн бұрын

Your very welcome..

@dharveenshq

22 күн бұрын

Did you have to cut the bracket on the other side too?

@MotoAndy

22 күн бұрын

@@dharveenshq unfortunately, yes I did.

I admire your determination but I would have just strapped a bag to the rear seat, yup I would have wimped out..... ride safe :)

@MotoAndy

22 күн бұрын

Thanks, I would do the same, but the rear seat is already occupied by another bag with camping equipment.😂

@gopher1471

22 күн бұрын

@@MotoAndy Luggage rack on the top box....just a thought. :)

I agree 100pc, the oem side cases put style before function, and I don't find it as easy to put them on and off as they're supposed to be. That solution looks strong and looks just as good imho. Decent colour match from the green film too...I'd be happy with that Andy 👍

@MotoAndy

22 күн бұрын

Thanks Paul, but I think you know me well enough to know that if the color doesn't match, I can't sleep;-).... But seriously, it turns out that the cover of the top case doesn't match the color of the motorcycle either, it's much darker , so one fine day I will repaint all three elements and then I will be able to sleep peacefully. Cheers...

Thank you for your very good video Andy, I'm wondering if a full face helmet will fit inside, haven't you considered shad 36 liters?

@MotoAndy

20 күн бұрын

Hi, thanks 🙂 Today I will be recording new material in the garage about SHAD cases because there are many questions about it, so I will definitely record whether a helmet can fit there. I was considering SH36 cases, but SH35 are visually nicer in my opinion and fit the motorcycle better, 1 liter of capacity will not make much of a difference. Take care.

Hello, first of all thanks for great and useful content. Can I ask what is purpose of that fur coat on saddle? Is it just warmer or even more comfy and soft?

@MotoAndy

14 күн бұрын

Comfy, soft, warm, better a.s ventilation, riding on it every time 😁 kzread.info/dash/bejne/aJaKprl7fM7MoNo.html

Hi Andy, Excellent video! You didn't mention price (or I missed it?) for the Shad panniers. I know it depends on where you purchase them, but a conversion is available. Also, Could you maybe show the Big Versys with just the racks so we can see what it looks like without the panniers?

@MotoAndy

22 күн бұрын

Hi, thanks. I didn't mention the price because I bought these cases about 10 months ago and they sat for quite a long time before I installed them. At that time (september 2023) I paid €295 for the SH35 cases set, plus 3P frames (each motorcycle has a different model) for €120 set and inner bags for €20 each, so the entire set was €455. The video shows what the frame looks like without a case (15:30), but if you really care about it, I will make a "shorts" vid this weekend and show the naked Versys with frames. take care.

@rench55

22 күн бұрын

@@MotoAndy Thanks! No need for the "short" unless you have nothing better to do. I was just curious, as I always ride without my panniers unless I'm traveling.

Hi Andy, I got the 36 serie, there is 3 years : great. A question about your seat : how are you cleaning it? Simple soap I suppose, and then ... to protect and feeling it, how do you do please? BR Michel

@MotoAndy

20 күн бұрын

I don't do anything special with my seat, when I wash my bike I also wash the seat with the same shampoo. Besides that I usually have my roadkill on my seat kzread.info/dash/bejne/aJaKprl7fM7MoNo.html

@michelazidrou9934

20 күн бұрын

Thanks very much m'y friend. 👍

Witam , ciekawe czy rozważałes kufry SH38X

@MotoAndy

22 күн бұрын

siemka, nie, nie rozważałem tych kufrów z jednego powodu, czy większy kufer tym więcej gratów, a uwierz mi w 35 litrach jest już za dużo. SH38X mają jednak swoją zaletą a mianowicie są prawie że prostokątne w środku co dodatkowo zwiększa ich atrakcyjność. Co do wyglądu to nie wiem czy Versys jest odpowiednim kandydatem to tych kufrów. Pozdrawiam.

Espetacular 🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗porque não malas de aluminium estilo bmw gsa?

@MotoAndy

22 күн бұрын

Como a Versys não é uma GS, é um pouco mais estilo do que substância. Eles são certamente espaçosos, mas não acho que caberiam nesta motocicleta. Cumprimentos

Hi Andy. The panniers look ok but i think maybe a bit too much green, certainly from behind, maybe put some country flags on the green on the back of the pannier like you have on the kawaski ones. It would break the green up a bit, but i think painting them with the correct kawasaki colour would be better. I have the standard ones on mine but with bigger bags that fill the whole pannier. I keep thinking about fitting some top loading panniers on mine, i find loading them easier from the top but i only use the panniers for holidays so i dont like having the metal brackets fitted all the time.

@MotoAndy

22 күн бұрын

Flags are allready on it my friend, and I have paint waiting, what I don`t have is time for it right now. Thanks

I like the oem hanging solution.. But the oem cases are not practical... But they are the same width like the bars so if bars will fit the whole bike will... Once you will forget about the width and you got a problem 🙆‍♂️

@MotoAndy

22 күн бұрын

Hi, Shad cases are only 3cm wider, i.e. 1.5cm per side, I don't think it makes much of a difference. I will measure everything again carefully this weekend. Take care

I guess you can't change the locks to use the same key as the rest of the bike?

@MotoAndy

22 күн бұрын

Unfortunately no, but believe me I tried 😉the locks for SHAD are a bit bigger, so unfortunately an extra key in your pocket.🫤

Mierzyłeś Jędrek szerokość moto na oryginalnych i tych Shada ?

@MotoAndy

22 күн бұрын

Shad jest 3 cm szerszy

@sawekgoab4083

22 күн бұрын

@@MotoAndy To nie dużo

@MotoAndy

22 күн бұрын

@@sawekgoab4083 no 1.5 cm na stronę raczej nie zrobi mi większej różnicy, a jak masz o coś zachaczyć to i mniejsze ci nie pomogą 😁

What width you got with it?

@MotoAndy

22 күн бұрын

shad is a total of 3 cm wider than the original Kawasaki cases

Ahoj zustanu u original toto se mi nelibi .Pouze muj nazor.

@MotoAndy

22 күн бұрын

Naprosto máte právo vyjádřit svůj názor, od toho komentáře jsou a navíc si každý obléká svou věc, jak chce. pozdravy

Why don’t you go to an auto painter they Can find the exact color for your side panels. The paint code must be somewere on the bike. Can,t cost a lot to be done. Greetings from Denmark

@MotoAndy

19 күн бұрын

Hi, because I can do it myself, kzread.info/dash/bejne/aoJ1rLJ8iZenmZs.html I already have the paint, what I don't have is time. I don't know about Denmark but in NL painting motorcycles is quite expensive. Take care