“Son, it’s come time we need to have a talk about your ball joint angles.”

@coreyahultberg

4 жыл бұрын

lol weld um lol jk...

@treyhopkins9328

2 жыл бұрын

😭😭

Keep up the good work and glad you guys are making people aware of the pros and cons.

@CustomOffsetsTV

Жыл бұрын

Thank you!

U just answered a question I have been trying to find for a lonnngggg time (: thanks for bideo

Great episode guys. Thank you.

This is exactly what I want/need to do to my 2016-F150-XLT-V8. Damn, I really wish you guys had a shop here in Tampa FL. My truck would be there all the time.

@abduallahalkhateeb9659

6 жыл бұрын

Tony Draper ain't fucking with the eco shit huh?

Great job at explaining this. I am thinking about doing the same thing except I have an 05 1/2 ton Suburban 4x4 & am wondering if I can get away with it. Any help would be greatly appreciated thank you.

I know most people don’t like body lifts but you could stack a body lift on top of a lift. That’s what I did to get a 9” lift on my 13 ram 1500

So on my second gen dodge, if I stack a hellbent steel leveling kit on top of a 7” lift coil spring from dodge off-road, it’ll be okay?

Yes!! Thank you I been wanting you to explain it now I know how to do it to my 2009 f150

@kalebhavlin4556

3 жыл бұрын

Send or upload a pic when you git it done i have an 09 f150 super cab i am wanting to get lifted also

I have a 2006 Ford f150 fx4 and I want to do a 4 inch lift and I dont want to do a spacer but i saw that the 6 inch lift does come with a lifted strut but i dont want to go the full 6 inch. Do they make a lifted strut for the 4 inch lifts or only for 6 inches?

I have a 7 inch rough country I love it but I’m annoyed that the lifted 3/4 ton are taller than my 1500 Silverado I want something taller

@Connor4x4

Жыл бұрын

I'm going to lift my 2014 silverado soon with the rough country 7 inch and stack it with my 2 inch level to make it 9 inch. But I'll also add a 3-5 inch body lift later.

A lot of guys I’ve noticed stack body lifts on suspension lifts. That way you don’t shred your suspension components too fast.

I got a RC 4 inch suspension lift on a 2011 f150. My question is I want to go to a 6 inch lift. Can I use a set of 2 inch RC lift struts with the 4 inch RC spacers on the front to get the 6 inch lift I want?

I have a 2017 Silverado 1500 4wd and Zone 6.5” lift. I’m looking to remove the spacer and add a 7” lifted strut. Do you think it would be okay?

Not sure if I'm too late for a response, I know you can't give a direct yes or no answer, but my question is I have a 2wd 2006 Silverado with a 6inch rc lift, I'm wanting to ditch the coil spacer and put in the 6inch Fabtech 6inch lifted coil, but also add a 1or 2 inch coil spacer on top of that. Putting aside any driveline issues I could have, my concern is if I can extend the rc nitro 2.0 shocks another inch or 2 like that? Or would I need to find some kind of adjustable shock? Most information it seems are for struts so I've been a little confused on what would happen with my shock, it also seems pretty tough to find the parts I need because it is 2wd lol. Any help would be appreciated!

What strut would I need to buy for a 4 1/2 inch RC lift for a 2wd GMC Sierra 2005? I want to lift it about 2 inches higher by doing this.

Hey I have a 2012 silverado 1500 with 2.5 inch front spacer. .. motofab.. will I be able to install 2 inches on the lower strut to achieve 4.5 inches without replacing the strut or upper control arm?

2004 f150 4x4 I have a rough country 6” strut lift and mechanic says that for the life of him he can’t fit the 2” spacer on top. Is there something we r missing? And what else should I do to correct everything? Thank you in advanced.

I have a question they don’t manufacture an 8 inch lift for ram 1500 14-18 I was wondering if y’all could help me figure how to combine a lift and level to obtain the height safely

Could the same be done with a zone 4 inch lift if I wanted to go to 6 inches on a 2012 Dodge Ram 1500 4x4

Is it okay if I get a 6inch Rough Country lift kit on my 2016 Tacoma. I already got a 1inch leveling kit

I have a 99 F-150 with a 3 inch sprindle lift... can I add a leveling kit onto it??

I have a 2nd that I just put a 3 inch spindle lift on. I was to add another 2 - 3 inches. So I can keep the spindle, and add a bigger 2 inch coil and shock and I’ll be good? And just add a big block in the rear with shocks to pair with the block. Is that correct?

Can i install 1" spacer on top of my 6" rough country struts on 2011 tundra????

Did this on my 2017 GMC Sierra 1500 SLT to fit 35s. Looks good and no issues.

@GDubLifts

3 ай бұрын

Still no issues?

Soo I'm looking at ordering the READYLIFT SST 3.5" lift & I currently am running their 2.25" leveling kit, could run the leveling kit on top of the lift kit to get a bit higher?

Have an 2018 silverado 2wd, has a 4.5 rc lift want to add 1.5 or 2.5 spacers on front , is it ok. Just want some more height.

I have a 2009 Ford F-150 I preferred to have a really soft ride I still have factory shocks and springs I was looking to order new Front struts what do you suggest or do you have a link I wanted the softest ones out there LOL

What about a readylift sst 3.5 with the uca correction, and a leveling strut so 5” in the front to make it sit level?

Would it be ok if i get a 2-3in level then add bigger blocks in the back to keep the rake? And what would i have to correct for angle wise?

@HaydenAlbarado

Жыл бұрын

I’d get a 3 inch spindle instead of a level. Lowers your hub instead of giving you bad angles

I wanna stack 2 leaving kits in the front. 2.5" and 1.5" or another 2.5". Is that okay?

Can I do this with a Chevy 1500 I have a strut lift and added air bags for towing and but the rear sits higher. I will be install the cognito upper control arms but want to put a 3in leveling kit on top of my current 7in rough country strut lift.

Did something similar to my 12' Ram 1500. 6" bds lift, used 5100 bilstein struts and set them for 1.5 inches of lift. Since I had a leveling kit in my truck to begin with I used the rear spacer on top of the lift coils to gain an inch there. But I upgraded my UCAs and the the kit came with a front diff drop so my angles aren't so cringeworthy.

@scottmiller2706

5 жыл бұрын

Did you go with the 5” rear coils?

@robinthrill3r7

2 жыл бұрын

On the Mcgaughys lift site they have the same thing you did. Not saying you copied. But the only 8" kot I could find for my f150 was one with a 6 inch kit, add-a-leaf, spacers and Bilstien 5100 adjustable shocks as well. It says it keeps the angles perfect.

PERFECT VIDEO!!!..but PLEASE do this on a 01-06 2wd Tahoe!!!... with a rc ntd lift!...I personally know soooo many people that want to add keys and coil spacers to there rc lifts but are worried about there diff angle and the rear axle traction bars...

Another case is (like mine) spindle lifts and coil spacers. A spindle lift just drops the hub assembly (2wd) lower and keeps the same angles and then adding a coil spacer is just like putting a leveling kit on stock suspension. I have 3.5” spindle lift and a 3” coil spacer making 6.5” of lift

@edwardgonzalez8378

Жыл бұрын

Question bro , I have a 2wd currently on a level (springs and shocks ) but I want to add a 4inch lift , what should I do? Or what do you recommend

@79dent

Жыл бұрын

@@edwardgonzalez8378 spindles. It it’s a Chevy crank the keys 🤙

I have a 15 F150 Platinum. I have a 6” BDS Coilover lift with fox shocks so I should be okay to stack a 2-3 inch level on top according it to video right?

Thank you for sharing this.

What if you have a 2 inch leveling kit and wanna put a 6 inch lift on it can you stack them

can I stack a 1" lower level spacer with my mcguahys kit already set at 9? I currently have their upper arms as well. truck is a 2013 sierra 1500

shawn pops in a 0:41 LMAO

I had fox 2.0 coilovers and icon delta joint UCA put on my 2018 Silverado to "level" it from factory stance (at least that's what the shop where I had it done told me it was gonna do) and fox shocks on the rear. The back still still sits probably almost 1 to 1 1/2 inches higher...any ideas on what I can do to make it more leveled?

@CustomOffsetsTV

5 жыл бұрын

Putting an adjustable leveling kit in would help bring up the front. Check them out here- bit.ly/2ribovC

I have a zone 6.5 inch lift. Could I do this on my Silverado?

Could I stack a strut spacer on a 2.5 inch rc leveling kit?

Idk if you guys check your comments on old videos anymore but i have a question on this topic. I have a 2001 chevy silverado 1500 rwd with a 6 inch rough country lift already on it. The front is still pretty noticably raked so I was wondering if I could put 2 inch lift coil springs in to hopefully level it out since I literally just bought the lift kit and cant afford a different one. Hope you see this comment, your videos are awesome and super helpful.

@coffee_vids275

2 жыл бұрын

Smaller rear blocks

So which would be safer a 2inch level strut with a 2in spacer on top ot a 2 .5 inch strut with 1.5 spacer on top of an 06 to 08 ram 1500 4x4

Hoping this can get answered Thank you in advance hi bought a 5 inch rough country lift basically upfront 3 inch spindles with 2 inch spacer on bottom can I add a 2 inch spacer on top

so adding a .5” or 1” spacer to a bilstein 5100 on a 5th gen ram rebel would be fine?

Can you put a diff drop kit on procomp 6” lift?

I have a 6inch rough country on a 2019 2500hd with stock keys can I put bigger keys in it to level it out?

I have a tuff country 4 inch lift. It doesn't use a new knuckle. Just a spacer. Doesnt put the drive angles at the best but i had my uncle shave down the spacer sonits definitely better. But can you buy a knuckle from. Another company and install them with a different kit? Like a tough country knuckle and add it??

I have a 96 c1500 yukon with 4 inch spindles can i add 2 inch coil springs to make it a 6 inch lift

I leveled my truck with a 2 inch leveling kit. Going in for a alignment and now they say I need new cv axels (extended performance) because my truck is now “lifted”. Is this true guys? Please help

Could I stack a 2.5 rear block on factory block ?or just go ahead and buy a 3.5 block

I have a question regarding this video. I have a 2014 F250 ccsb 4X4 diesel with a 6 inch fabtech lift. My question is can i put two inch coil spacers on my lift, my 22X12's on 37's rub and i would like to go to a 14 inch wide wheel. I don't want to cut or buy another lift kit. I was thinking adding a 2 inch spacer to the front and a 4 inch block with my lift springs and removing the stock two inch block. Any help would be appreciated. Thank You for your time.

@CustomOffsetsTV

5 жыл бұрын

We do not recommend stacking lifts together, it stretches components to angles and lengths the kit was not intended for.

I have a 6 inch suspension lift on my 98 Chevy 2500 I want my front end raised an inch and half to 2 inches. Can I use a torsion key leveling kit to do that?

@CustomOffsetsTV

6 жыл бұрын

Would have to research on your own what will work and what won't. As we cannot say that it would legally

I have a 17 ram 1500 4x4 with 6inch zone with 5 inch rear coils. The rear still sits higher then front of coarse but down the road would like to level the front out. What would i use ? Would i use the 2" zone level kit an c arms ? Or what way should i go ?

@CustomOffsetsTV

4 жыл бұрын

Yeah that would work for you!

I have a 2008 Chevy Tahoe I put a 2 inch lower level kit and a 3 inch uper strut spacer. On factory components will my CV joints and all be ok by doing that

@jacobn3160

6 жыл бұрын

rob owens it'd be bad on your front end. Definitely get a diff drop

So right now i have a bilstien 2.8 inch longer strut, can i just add a 6 inch lift kit with the 6 inch soacer to get 8.8 inches?

So pretty much if you have a diff drop lift.... You can add a leveling kit? I've got a 2020 Chevy Silverado with a 8 inch lift with the diff drop and I'm going to add a 3in spacer and just stack the rear possibly welding together or Fab up a rear block

@MrJag267

Жыл бұрын

I’m on the same page with you. I have a 21 Silverado with the RC 6” kit, front end has the diff drop and extended struts. So no harsh angles up front. And rear has the 6” block and 4.5-8” n3 shocks. I’m about to pull the trigger and do a 2” strut spacer in the front and a 2” add-a-leaf. How did yours turn out?

Would it be okay if I stack a 2.5 on my RC 6" kit without adding anything. Can I get away with just getting UCAS? 2017 ram 1500.

@CustomOffsetsTV

4 жыл бұрын

We do not recommend stacking lifts, but you can look through forums to see what others did!

Id like to know what i can do to raise up my front end higher then the rear without having bad angles on my upper control? I got a 5inch rough country lift kit on my 2016 2wd chevy silverado? The rear is probably like 2.5 inches higer.

@CustomOffsetsTV

5 жыл бұрын

Check out our leveling kits on our website! customoffsets.com/suspension

@justinfortin8095

4 жыл бұрын

Juan Gonzalez u dont have to worry ab ur cv axle angle so u lvl it until ur ball joint cant go higher 😂

I put my own lift kit on for the first time. And ordered new struts (not knowing they were a 6” lifted strut) then I put the front spacer on too and ended up with the meanest “Cali lean” so then I ended up taking that spacer out and just putting my rough country 2.5” spacer on top just like he said and truck looks a lot better now lmao

@CustomOffsetsTV

5 жыл бұрын

We don't recommend stacking spacers on top of lift kits.

@jeremysierra4763

5 жыл бұрын

Custom Offsets you mean not stacking spacers on a reg 6 inch spacer kit since it’s spacer on spacer but you could do it on 6inch lifted strut kit since it does not use a spacer and would be staking spacer on top of strut correct ?

@K3VG979

4 жыл бұрын

Custom Offsets does that count for leveling kits ?

@ThatBoyMichael1

Жыл бұрын

@@jeremysierra4763does this work?

I was wondering if you could just go with a larger strut? I’ve got a 7.5 rc with a 2 inch level so yes I’ve stacked spacers and it’s been fine but I want to go with a different brand 7-9 inch struts with a 2 inch level. Is this possible? My upper control arms are for up to a 12 inch lift.

@DGKboy69

Жыл бұрын

Are you 4wd?

I have a 2018 f150 rwd i have a 4.5” maxtrac spindle kit and im about to stack 2.5” leveling kit to make 7” of lift and a 4” block in the rear. The ucas should sit like a 2.5” leveling kit only bc the maxtrac spindles keep the geometry the same

I have a 6inch Bds but still have a lot of rake in front. What if I replaced the front struts with some adjustable bilsteins along with the bds spacer. Would this be ok to level the truck?

@wavyykevin2473

Жыл бұрын

Did this work???

How can I get my mcgoughys 7-9" lift leveled front to rear? I don't like the squat look on it

I have a leveling strut that’s about 2 inches, could I put a 3 inch spindle lift in? I read that spindle lifts don’t change angles. Would this work or mess up my front end?

@legendarymotorsports7373

10 ай бұрын

Yes

I dont necessarily want to go higher, I just want to level out the front end of my truck. Its a 2014 tundra with a 6 inch Bds lift and I need to pick the front end up around 1.5 to 2 inches for it to be leveled out. How can I achieve this?

@CustomOffsetsTV

5 жыл бұрын

Send an email to info@customoffsets.com and our suspension specialist will be able to help you out with your question!

I have a 2008 f250 that has a previously installed 2" spacer below the front coil springs. I'm wanting to level the truck but I need another 2.5" of lift. Can I safely add a 2.5" ready lift sst leveling spacer kit on top of the springs in addition to the 2" spacer that's already on the truck?

@CustomOffsetsTV

6 жыл бұрын

We do not recommend stacking, but people have done it, more then likely truck is level lifted, so the rear has an add a leaf, or a small lift block, to compensate for a trailer being on it, or a salt box etc!

I have an 04 tacoma with a 6 inch rough country kit what suspension adjustments would I have to make for it to be safe to add 2 inch rc leveling kit on top?

@CustomOffsetsTV

5 жыл бұрын

check out what others are running at www.customoffsets.com/gallery

What about doing it the other way around? Say getting a 4" BDS lift kit with the big spacer and replacing the stock strut with a Bilstein leveling strut set to 1" of lift? What I really want is a 5" front lift with 4" rear blocks on my 2017 F-150, but BDS only makes 4 or 6 kits.

@CustomOffsetsTV

4 жыл бұрын

That should work, but check forums and Facebook groups and see what others have done!

@edwardkareem6446

2 жыл бұрын

You could do that but it's going to ride very stiff

can you do this same concept with an air bag?

Can i stack a 5in spindle lift on top of my 6in rc suspension lift???

I have a 2013 f250 and i'm installing a 8 inch radius arm lift from superlift. The front has full 8 inch coils and shocks. Can I stack 2 inch leveling kit under 8 inch coil for 10 inches of lift? Want to clear 24x14 on 37 without much trimming

@CustomOffsetsTV

5 жыл бұрын

We do not condone stacking lifts. Best bet is to either not do it or buy a bigger lift kit.

what about if you keep the strut on top, and put a Rough Country style bottom spacer... Would that work?

@CustomOffsetsTV

5 жыл бұрын

@Lavel. send an email to info@customoffsets.com and they should be able to help you out with your question!

Those cv angles are huge man...How's the ride?

I'm running a 7 inch bds, thanks for info saved me 4k

I have a 6inch rc lift I changed the front struts to 6 inch struts with no spacer. Now can I add the rc leveling kit on it and a add a leave in the back. Would I still need new control arms

@MrJag267

Жыл бұрын

I’m thinking about doing that same on my 21 Silverado, did you do it and how did it work out???

I have a 2014 GMC Sierra 1500 rocky ridge. It has a 4” spacer but everything has been dropped for a 6” lift. Can I just add a 2” leveling kit? My angles are terrible right now. But just the opposite of what you usually see on lifter trucks. My control arms and cv’s point up instead of down. I assume 2” more would make my angles just about flat. Can I do this?? Also. Can I go higher than 6” in the rear. The tallest rear block I can find is 6”? Can I not go higher than that without a longer axle?

@CustomOffsetsTV

5 жыл бұрын

We do not recommend stacking spacers the best thing to do would to just go with a bigger kit. Here is a link to lift kits that fit your vehicle: www.customwheeloffset.com/store/suspension?year=2014&make=GMC&model=1500&drive=4WD

Could I put the 3 inch rc kit that’s just lifted coil springs on a 2.5 inch leveling kit to come out to 5.5 inches or how would that work

@CustomOffsetsTV

2 жыл бұрын

We cannot recommend stacking due to liability but you can do some research and find out what stuff works together and what does not

What about spindle? Does the upgraded spindle not add inches to the lift?

Finally Brad you made a good video can you make a video if some coilovers or strut assemblies are interchangeable from a two-wheel drive to four-wheel drive or a 4 wheel drive to 2 wheel drive what I did is I have two wheel drive F-150 and I wanted to add a four inch rough country struts on the website it only said they are only for four-wheel drive application I popped these on on my two-wheel drive in a gave it for and a half in of lift about half an inch taller than regular it had the same mounting points I couldn't find nowhere in the forums or any video about somebody doing this so I have to spend my own money and I did it on my own taking that $394 risk

Can someone tell me how to get the parts for the diff drop. I would love to replicate what hes talking about

I have a 2011 silverado with a 4” cst lift with strut spacers and the diff drop so my cv’s are almost level. Can I replace the 4” strut spacer with a 6” strut to end up with 6 inches of lift? If i can I’ll order on your site tonight!

@CustomOffsetsTV

6 жыл бұрын

the extra 2" may push your CV and ball joint angles to a unsafe/unreliable amount of angle Michael, best bet would be to do some research on it and see if it can handle that much more angle

I have a 3 inch leveling kit and I wanna add about 3-4 inches ... what lift should I get ?

@CustomOffsetsTV

5 жыл бұрын

You are most likely looking for a 5 or 6" kit whichever they make for your vehicle. You can check out our lift kits here! customoffsets.com/suspension

Hey custom offsets, is it a good idea to buy a 6in BDS lift for a 2009-2014 F150, and put the strut spacer on a FOX 2.0 Coilover?? Help!

@CustomOffsetsTV

5 жыл бұрын

If you listened in the video, we cannot recommend stacking setups, its something you'd have to research on your own Kernal

I have a 2012 silverado ltz.put a 3 inch strut spacer and 3 inch knuckle and rough country upper control arm.gave me a true 6 inch lift.with 3 inch rear block and 2 add a leaf by zone.and black max shocks.damn thing drives like a Cadillac on the road and holds the ground on the dirt.i didn't want that extra tall block in rear.seem too unstable.and didn't want that 6 inch spacer looking all generic on top of my strut.and rebuilt entire front end.all under 600.00

Do you think I could safely add a 1.5 inch spacer on top of my 6 inch Pro Comp lift on my 2006 Silverado 1500 2 wheel drive??

@CustomOffsetsTV

3 жыл бұрын

We don't recommend stacking lifts and leveling kits personally

I have a 4” lift via spacer up top spacer on my 14 Sierra. Can I add a lower 1” level kit to level with the rear end??

@justinfortin8095

4 жыл бұрын

I have a 2014 sierra too and wanna what problem u have with it😂cause mine have a lot of problems but i wanna a 2" leveling kit

Isn't this how rough country comes on their 7.5". There's a huge spacer on the front struts

@jakebassano2008

3 жыл бұрын

Yes

ya boy brad

2.5 inch leveling kit on a 08 Silverado 2wd can you add a 3inch spindle on top of that ?

@calebsanders4353

7 жыл бұрын

Stealth With a good set of ucas I believe you can

I did this to my Silverado. I have a 7.5 lift RC lift kit. And I did add a 2.5 lift kit. The 2.5 lift was a 2 piece , One spacer for the top of the strut, and one for the bottom. I sold the top piece and kept the bottom one. So I’m prettt much ah like 9.. I’m saying 9 because my buddy had a 9 inch mcgaughys lift and parked next to each other we were dead on leveled. BUT my rear was higher. By like an inch. I did have to install RC 3 inch lift upper control arms cause the stock ones MESSED UP FAST. ride isn’t so great. But it looks good. My CV Axles are maxed. But still work fine.

@vystin5800

7 ай бұрын

not sure if you’ll see this 5 years later but i currently have a 7.5 rc and i’m trying to get more height to run 37s just curious what kit your ordered

So it should be ok to take an already leveled truck with say a Halo Lift Aluma coilover at say 2-2.5" and then buy a 4" lift kit and just add a 2" spacer to your coilover, that should be ok to get you to the 4" height?

@CustomOffsetsTV

4 жыл бұрын

It’s not recommended but yes

I have a 6 inch RC lift with the lifted N2.0 struts, can I add a 2 inch spacer on top of it?

@colevanzandt706

5 жыл бұрын

Did you ever find out the answer?

What’s up brother, I have a 05 Chevy Silverado 2wd. I currently have a 3 inch rough country leveling kit, which is basically just a lift spindle and socks. I’m rocking 33 in tires. Would I be able to add a 2 inch spacer on top?

@CustomOffsetsTV

4 жыл бұрын

We do not recommend it but people do it. Do some research in forums!

What upper control arms does he have on there?

2013 gmc sierra on 3.5 rc lift struts with rc forged uca. Can I add a 3 inch knuckle lift and be good or not.

@countryboi1225channel

3 жыл бұрын

I'm running 20x 12s on 35s

I am new to your Channel great videos. I have a question back in 2014 i bought a brand new 2014 Dodge Ram 1500 Rocky Ridge Edition. My truck actually sits 2 3/4 inches lower in the front than the back it actually looks like it's nose diving. For my application would it be alright to add a two and a half leveling kit on top of the lift kit what is your opinion on this application would love to have your help and advice thanks

So I have a 4 inch bds lift on my yukon, with their struts and springs they provided. I should be able to put a 1.5 inch spacer to add a little more aswell right? Same with the rear, add a 2 inch spacer to achieve the right height I want?

@CustomOffsetsTV

4 жыл бұрын

Yeah that should work