Sewing of a carpet from a jute braid and a rope.
Тәжірибелік нұсқаулар және стиль
I wove a homemade braid from a soft 10 mm jute rope.
The width of the braid comes out about 19-20 mm, the height is about 7-7.5mm.
From a 26m length of rope, 24m braids turned out.
It is not necessary to weave too tightly.
The rope in combination with the scythe took 6 mm thick, I think 8 soft rope will do well.
It is best to weave it on the street, of course there is a lot of garbage, but at this stage you will be able to remove all wood inclusions and the color of the braid will be uniform and clean.
I have here a stitch pitch of 3mm, width of 6mm.
I tell you more in the video, watch to the end.
Try it and you will succeed!
Creative success to all!
You can find my products on the website
makramaniya.ru/
Пікірлер: 9
Здравствуйте. Очень красиво. А как же Вы плели косу? Из джута?
Браво!!!! Прекрасный , необычный ковер! Подробный рассказ! Ждём новых выпусков от мастера креативных изделий❤
@makramaniya
Жыл бұрын
спасибо, за мной не заржавеет 👌😁
очень интересный и красивый ковер 👏🔥
здравствуйте! какую нить нужно использовать для сшивания джута ? спасибо за видео
@makramaniya
4 ай бұрын
Здравствуйте, я использую ПЭ 40/2 и армированные.
Спасибо! Полезно. Подтвердила свою догадку о том, что для чередования фактур, их сначала надо сшить между собой
Сколько метров джутовой веревки (не косы) ушло на такой ковёр?
@makramaniya
Ай бұрын
Здравствуйте. Джута диаметром 6мм ушло около 40м.