I love my Pfaff 4.2 Andrea. I've had it about 9 months and like you I did a lot of research as I specifically wanted a mechanical machine. I almost exclusively use this machine these days. See also an extensive reply to another commenter who wanted to know if suitable for alterations work. Bridal sewing is my main work although in the off season I'm doing denim hems and zip replacements and general sewing all of which handle beautifully on the Pfaff! Thanks again. The sewing community is wonderful for sharing information.

@Beyondthepinkdoor

2 жыл бұрын

Thank you for replying to the comment Moira, I had missed that question. I used to do bridal alterations when I had my previous Pfaff and it was a dream. I found it particularly brilliant on a french seamed beaded bodice if it needed just a little take in under the arms. I would manually use my hand wheel to sew over sequins or beads . This would be impossible with my computerised machine. It was also fabulous on thick seam intersections. It never skipped a stitch. I think for someone like me who is used to an industrial machine sewing this pfaff is perfect. Plus my hands automatically goes to the reverse lever and has the thread snipped before I remember that I have a button to press on my computerised machine to do this. Muscle memory 😊

So I am not the only one who never warmed up to their newer computerized machine. Plus there are moments, when my old mechanical really beats the new computerized one: for shirring and also for long buttonholes. For a pinafore dress I needed two long buttonholes in the bib to thread through the straps. No problem with a 4 step buttonhole, impossible for a one step buttonhole. But with 2 different machines I feel I can tackle nearly everything. Andrea, that was a lovely and clear review. Thanks and happy sewing.

@piccalillipit9211

Жыл бұрын

I have a computerized modern Singer and it is total plastic crap. I also have a 1960's all-metal Singer and it is FANTASTIC. But I have an issue with top stitching jacket lapels as it tends to roll them as yo uhave no way of holding the under fabric

@Matoujapon

4 ай бұрын

I have a Pfaff Ambition 620, a beautiful computerized machine that promised me the earth and that is just trouble after trouble. I'm selling it for a select 3.2. I met with a Pfaff technician, he told me that unfortunately my beautiful and very expensive machine was crap. I never had a mechanical machine, I'm a bit scared but he'll teach me (I could find the machine for cheaper on the internet but the dude will come at my place to teach me and will be my tech support if needed, worth the price to me). I just can't wait to try it and to never be bothered again. Even if it means I'll have to cut my threads by hand or turn the wheel to pin the needle instead of pressing a button. My choice is done. Im young, I love technology but I feel I've been scammed with the ambition 620. And it was around the same price than the select 3.2.

i love the review. i just picked up the 6122 for 200 and it looks like the exact same machine i’m very happy with it so far.

I bought my first Pfaff about a year ago. The IDT system is just the best. Like you I leave it down all the time.

Brilliant review Andrea, Thank you.

Ooh was lovely to have an up close look! Loving the inbuilt walking foot thingymajiggy!

Thanks Andrea, for the review. I had planned on changing my machine earlier in the year but I changed my mind for the moment, this machine is still on my mind though. Your review is a great help.

Thank you for the perfect review. The piece de resistance is brilliant, a built in walking foot. And, thanks for demonstrating 14 layers of canvas

Thank you so much for taking the time to do the review Andrea! I am treating myself this year to a new machine and this was one of the ones I had on my list 😁 I’m going to go to a machine supplier hopefully soon to try out a few models and this is one that I do want to try, the only thing putting me off is the button hole as my current machine is a 4 step manual and can be a bit tedious and I never get them all exactly the same size……but at the same time I love a full mechanical…. Ohhh decisions decisions 🤣

I got my Pfaff 3.2 last year in May. She’s brilliant 😎

I am glad to see the other issues with your old machine are gone. I waited ages before I bought a computerized Bernina. So far I have been very lucky.

I am looking at one of these machines your video has help to make my mind up....... Tarr

I did enjoy this, learning I have4.2 I fell in love with Pfaff 4.2 Thank.

Great review, I'm always tempted to get a manual machine as they are more sold and less likely to skip stitches, but then I like the speed of pressing buttons and having the shortcut buttons that come with a computerised machine.

Hi Andrea I just want to say I bought this machine off of your recommendation and I am loving it so thank you!

@Beyondthepinkdoor

2 жыл бұрын

Hi Kitty , that’s amazing, delighted you love it .. I enjoy every moment sewing with mine

This was a great review. Thank you 😀👍

Thank you so much for the review. I wonder if I go for this one or not! It helped a lot!

That’s a beautiful machine. I have the 1475 cd made in Germany. It’s not manual, but it’s a great machine, I still use it . I have not tried to sew vinyl or leather with it, but I don’t see why it couldn’t do it. It’s a strong machine and heavy. Pfaff is a great brand. I also have a Creative vision embroidery and sewing machine. The bottom stitch is almost as nice as the top on the embroidery.

I’ve got the 3.2 and am very happy with it too, the main difference i saw was the automatic needle threader. I don’t know if you have seen, but there is an american youtuber who has done super great videos on how to use the 4.2 which have helped me out on how to use all of the functions. I think her channel is heirloom creations.

@Beyondthepinkdoor

2 жыл бұрын

Thank you , I’ll look her up . I’ve tried the roll hem foot with no success , I’d love to be able to use it

@kimwaechtler9636

2 жыл бұрын

@@Beyondthepinkdoor kzread.info/dash/bejne/dpZ1l9ucecuXlcY.html try this… although i bought one and haven’t managed yet either….

@Beyondthepinkdoor

2 жыл бұрын

@@kimwaechtler9636 super!! Thank you

Thank you for sharing

Hello beyondthepinkdoor I just wanted to say I purchased the Pfaff Select 4.2 fantastic choice it does exactly what it says and this machine is workhorse like me 😁😁thank you for sharing your experience and I also spoke to Pfaff direct they said this sewing machine is a workhorse as you described on your channel XXXX

@Beyondthepinkdoor

Жыл бұрын

Congratulations Sarah , that’s fabulous. You will love it 😍 . Andrea xx

Thanks for the great, very clear review. I'm considering a Pfaff but not sure which one. Can you use a twin needle on this one?

Thanks for the video. I know you said it’s not the best for button holes. But have you tried it to see what it’s like? It sounds like the perfect machine for me. But I do need button holes. I don’t need anything fancy though. Just a simple one. Thanks

I am impressed with the amount of thickness this machine can go through, but what about leather??? Does it come with a roller foot, if not where could I purchase one for the the 4.2?

Is it a top loading bobbin Andrea.?

A few years ago I picked up a secondhand PFAFF Tipmatic 6152 that is very similar to this. It is the best sewing machine I've ever used (I've never owned anything fancy and I've yet to try a computerized system). My Tipmatic needs maintenance and if that doesn't fix the issues I've just started having, I will replace it with this one. It looks like all the attachments and features are pretty much identical.

@Beyondthepinkdoor

2 жыл бұрын

I love my Pfaff . The attachments from my older model fit thus one perfectly. It’s a super workhorse of a machine . I always look forward to sewing with it . It would be a perfect replacement for your tipmatic.

The IDT system looks very helpful when sewing slippery fabric and it should help with puckering . Is it the case? I have never tried a pfaff machine

I had to retire my old, old Pfaff with IDT and I got the Pfaff Select 4.2, I'm hoping it'll be here soon. How did you find the straight stitches? I had heard they were not perfect.

Merci

Can you sew smoothly without the IDT?

Hei. I have a question regarding twin needle? What is the max width of the twin needle I can use in the Pfaff select 4.2? Can I use 4mm and 6 mm? Thanks

Hi dear thanks for the video I make clothes alteration and some time is the thing or very light fabric. If I can used for any alterations? Wish the best

@moiraging3927

2 жыл бұрын

Hi, I use this model for my business which is mainly bridal alterations. Highly recommend it - as you know bridal fabrics are tricky! Lace, chiffon, satin etc all go through without a hitch. My fancy computerised machine is barely used these days - it probably has the sulks! Like Andrea the lack of light isn't a negative as the other points far outweigh it. I have good task lighting all around my work table anyway. I'd also like to say I make tartan waistcoats for a local hotel staff and I prefer to do my buttonholes on this machine. I get super results! Apologies Andrea if I jumped onto the reply but had to endorse your feedback for this Pfaff 4.2. So thanks for taking the time to do the vlog. Best wishes x Moira x

😃

Hello I have a pfaff creative3.0 I do love it but I have trouble with my tension and I am looking into buying a non-computerized because they are not as touchy as the computer ones I love my computerized machine I need somthing tuff and I have a a lot of pfaff feet so that is y I want to buy this pfaff and have the best of both worlds

I just bought this machine but mine not that noise. I to did not need all the fancy stitches let's face it all u ever use is the straight stitch and zig zag . Most new machine are made of plastic if u ask other brand what in the machine they look at u like u have twenty heads. The shop call the repair guy for me and ask if it's made with metal parts and he said yes. Just like u I have a 6091 from 34 years ago and it works great its just that my button hole off on it .I have been looking for 2 years at all brands just could not buy anything else plus all my old feet I have bought fits on this model. Even thought I could have bought the high end model there made with plastic parts and the weight will give it away if it's plastic happy sewing hope this helps anyone

Just bought one- trying to bond with it. My work horse is a old Singer

@Beyondthepinkdoor

2 жыл бұрын

I hope you love it as much as I love mine

I had a beautiful machine. Until it was damaged beyond repair. PFAFF 2012. I think it was made in the late 60's. What was the one you had? I am nervous about buying from the new group. They are all made in China. Pfaff,. Husquvarna, and Singer. If you flip your machine upside down on the bottom does it say made in China? I had bought a Husquvarna since the company restructure and I was always taking it to the shop. Looking for another machine and I think I want to go back to Pfaff.

@annieb1011NE

Жыл бұрын

Karen did you buy another Pfaff?

is this one very loud ?

Thanks . Spanish. Traduction

Hello! I'm working with felt. How you think, this sewing machine will be good for this?

@Beyondthepinkdoor

Жыл бұрын

I wouldn’t be able to advise you , sorry . I do t work with felt . I would ask your nearest Pfaff dealer

Hello Andrea! I have a pfaff too and yes, i don't want to miss the idt-system. It's great, no extra walking foot is needed. Happy sewing 😊

@marthesefloresmartin6476

2 жыл бұрын

Hi I just bought a new sewing machine it's Pfaff sewing machine 4.2 gray in December 2021 and I want to know what kind of foot I need to use for patchwork decorations on some things thanks a lot

@marinam6931

2 жыл бұрын

@@marthesefloresmartin6476 check out Heirloom creations