OMG! If I could give this video an award for best KZread video in existence I would! Thank you so very much for posting it on here, you completely saved my day and solved my recurring problem that I couldn’t figure out how to fix that my machine repair shop didn’t even realize existed because we never had a conversation about how I was putting those parts back together and they just assumed my problem was from build ups of lint and such whenever I took it in for a tune up because that’s what I assumed was the cause and when they put it back together correctly afterwards nothing would be wrong anymore until I open it up again. I had no idea this was the correct order but it explains everything and now I know how to fix it if things ever get misaligned again, genius!!!!!

@arxmechanica

13 сағат бұрын

@starfishgurl1984 I'm glad this was helpful. 🙂 All I ask is that you like this video and Subscribe to my channel. More videos are on the way.

I was having threading issues with the bobbin case for my Presto 2, the thread would jam inside the metal plate and teeth. Every time I unscrewed the plate, cleaned the jammed thread, place the bobbin case, then screw in the plate, the problem continued. Your suggestion to place the plate first, then place the bobbin case NEVER crossed my mind. Needless to say, doing that HELPED me out big time. The thread jamming issue has stopped. And now, for future reference, I know the correct way to placing the bobbin case if I have to remove it again. Thank you so much.

@arxmechanica

3 ай бұрын

Thank you for your comment. I'm glad I could help. 👍🙂

Thank you so much for making this video. Not only did I learn how to make sure the bobbin case has a little movement to keep the thread from wrapping around, but I also learned the pro tip for using a nickle to remove the screws - everything else was too large. Again thank you.

I’m thankful I found your video. Fixed the problem with my baby lock!!

@arxmechanica

26 күн бұрын

Great to hear. I'm glad I could be helpful.

Thank you for this video. I just got a BL Meridian and was having issues with the bobbin. I learned (From you) to screw down the plate before inserting the bobbin case and it took care of my problem.

Thank you! I’m a subscriber because you saved me $90 for a simple fix 😀

@arxmechanica

Ай бұрын

I'm glad this was helpful.

Thank you so very much for your expertise! I was so frustrated with my Brother BQ 3050. I have taken that cover plate off dozens of times but never had an issue until today. With your help I was able to fix the problem and continue my sewing!

@arxmechanica

Ай бұрын

Glad this was helpful.

Thank you so much. I would not have figured this out on my own. 😊

Bless you sir!

This is exactly what was going on with mine! Thank you for sharing this!!!

@arxmechanica

Жыл бұрын

You're welcome. Glad I could help.

This video was a great help. Thank you so so much 😊

@arxmechanica

9 ай бұрын

Glad I could be helpful. 👍

Thanks ❤

Thanks I have been making this mistake

Thank you!

@arxmechanica

Жыл бұрын

You are welcome. I hope this video is helpful.

Great video, just subscribed you saved me from buying a new machine plus I lost my screw driver 😂 you need to make a KZread short on the Nickel! Put a bunch of hashtags sewing related..

@arxmechanica

Жыл бұрын

I'm glad it was helpful. Thanks for the Nickel idea. 👍😎

Do you recommend horizontal bobbin case or drop down one like in brother? Thanks

What is the small flat spring to the side called? Mine is bent

Thanks. How much should that bobbin case rotate once in place? If I put in place without the metal plate on top and turn the mechanism it rotates back and forth much more than when the plate is on.

@arxmechanica

Жыл бұрын

Yes. It will move much more with the metal plate off. There is a stop on the bottom of the plate that keeps the bobbin case in place. Always lock the metal plate down tightly with both screws before inserting the bobbin case to avoid damage.

I have a singer 4423 and the thread is getting caught around the bobbin case, I have cleaned lubricated disassembled and re assembled changed needles etc and it's still getting caught. I was sewing patches on just fine for an hour prior. Any ideas

@Just_in_Rich

2 ай бұрын

I have the same problem. Did it get resolved? If yes, then how did you do it? Your response is valuable. I would greatly appreciate it. Thank you.

I got a brand new one and right out of the box I had this issue. The thread wrapped around the entire case. I returned it..

I have a brother 2600 i can't get the bobbin case out without removing the plate..? The metal arms of the plate wrap around it. Am i doin something wrong

@lorim2074

Ай бұрын

Likewise, I've noticed the same thing with the XL2600i, but I was able to notice that after screwing the plate down, it affected the bobbin case position. So I made sure it was correct and able to wiggle a little as mentioned in the video. Then I added the bobbin cover plate, which didn't interfere with the bobbin case. After testing, it works great. I also rethreaded the machine for good measure. 👍 Good luck with yours, too.

I am having this issue. After taking apart and putting back together, thread is still getting stuck/ jammed in the bobbin case. Any suggestions on what I can look at next?

@elimitchell6147

9 ай бұрын

Im currently having this problem as well

@arxmechanica

6 ай бұрын

Make sure your upper thread is securely in the take up lever. If the thread is not, the machine will jam right away.

My Baby Lock Jazz 2 is brand new and yesterday I wanted to use it for the first time so I threaded the machine and grabbed my fabric but the fabric was getting pulled down and the thread was bunched up and stuck and the machine gave me a warning sound. Do you know why this is happening? It is brand new never used.

@arxmechanica

17 күн бұрын

Check to make sure your upper thread is correctly threaded in your take up lever, would be my first guess.

@LostInThreads

17 күн бұрын

@@arxmechanica Thanks for your quick response. I did do that and everything looks good.

@arxmechanica

17 күн бұрын

@SantaCruzBetty make sure your feed dogs are engaged and the stitch length is set to feed the fabric. Also remove the clear bobbin window and make sure that the bobbin case is inserted correctly. Check that the bobbin case wiggles left to right a little bit to allow the thread to pass around the bobbin case. If it doesn't, remove the needle plate and correct the bobbin case's position so that it does as shown in the video. Use only plastic class 15 bobbins with that machine.

@LostInThreads

17 күн бұрын

Thank you!

Mine is getting stuck but only when i do a design with heavy stitch, do you know what it could be?

@AGPLiLTrill

4 ай бұрын

What did you do?

machine is 20 minute old. but i am getting a bird nest under the project and it is always attached to the needle plate. tried replacing the needle, and bobbin. hate to return but don't know what to do.

@arxmechanica

17 күн бұрын

Make sure your upper thread is threaded in the takeup lever properly. If that is correct, make sure the bobbin case wiggles left to right slightly and isn't locked under the needle plate. Also, make sure you have the correct bobbin for the type of sewing machine. All three of those things will cause the problem you are having.

@arxmechanica

17 күн бұрын

If it's a new machine, you can be fairly certain that it's user error and not the machine itself.

What about if the thread gets tangled with the bobbin

@arxmechanica

9 ай бұрын

Make sure you have the correct type of bobbin. There are many shapes and sizes of bobbin. Only ONE kind works with your machine. For instance, the machine in the video uses a class 15 bobbin ONLY. Any other type of bobbin will potentially cause poor stitching or damage to the machine.

@arxmechanica

9 ай бұрын

Also double check that your upper thread in securely in the take-up lever. If it is not, it will get caught down around your bobbin/bobbin case, since there is nothing to pull it upward to form the stitch.

@elimitchell6147

9 ай бұрын

@@arxmechanica which is the take up lever again

Thread still stuck on bobbie case

It helped a little but it still gets bunched up

🌷 ƤＲＯ𝓂Ｏ𝕤ᗰ