The rack ears are included in the box when you buy these new, for those interested!

I used this setup in church for the stationary musicians... drums, guitars, keyboards. Then I needed more I/O's and bought the X32 Rack and still using the HA8000.

Man Excellently video Excellent editing Excellent sound Excellent humor Excellent information Everything 💯

Thank you for sharing! Thinking about grabbing one of these for my church's portable setup

Great video. Fantastic advice. Very helpful. Thank you Emmett

Good video! Thx for sharing. I watched it in case it included how to use the xr18 as a stage box AND send each signal to FOH. Still looking...

We pretty much use the same setup as a 4-piece band with the XR16 and the Behringer XA47000. Works great and yes, better audio quality that with a midpriced wireless monitor system we used before.

Wow! This guy is legit, looking forward to more videos!

Straight to the point and very clear. Thanks

Es La Mejor Manera de explicar, Directo, y con algo de comedia,no solo aprendi,tambien me diverti, gracias amigo.

Thanks for making this video! SO helpful!

Please explain how you manage the inputs so we can learn how to set up this on stage, thank you 😊

you need to rewire your xlr to TRS jack to unbalance the signal going into the headphone input or you get left in phase and right out of phase. look up how balanced outputs and headphone inputs work.

@emmettsmusictutorialsetc9331

2 жыл бұрын

Yes! I realized this mistake after finishing the video! I just pull it out and bypass the second ring!

@bjarkenielsen8515

2 жыл бұрын

Is that a specific cable I need to buy, or do I need to rewire/resolder a cable?

@66fitton

2 жыл бұрын

@@bjarkenielsen8515 Just buy XLR to regular 1/4 inch. Not TRS 1/4 inch. At my local music shop they are right beside each other on the rack. No re-wiring needed.

Hey why do we need this Amp can't you just use a XLR to 3.5 to be even cheaper? How dose the ha8000 help?

@emmettsmusictutorialsetc9331

Жыл бұрын

yes you can! 100%

Great tutorial man👍🏾

Thanks for the video. However why don't we connect each IEM directly to the 6 AUX of the XR18 (without the HA8000)? Because as you know this will allow each IEM to independently control their personal IEM.

@emmettsmusictutorialsetc9331

Жыл бұрын

Yes! I realized this after the video was made!

@MattLunser

Жыл бұрын

you can but each would need something like the Behringer P2 Ultra-Compact Personal In-Ear Monitor Amplifier for $59 each.

Good explanation! Thanks!

how you doing man . I have a question for you and I hope you can help me. how can i use the behringer ha8000 with just the behringer air 18 mixer. Now tell me if it's worth buying the ha8000 because I have 2 monitors from Galaxy Audio Any Spot AS-900-4 Band Pack System, and one from Galaxy Audio AS-950 In-Ear Monitor System. Could you help me with this question? ? Thank you.

my x air 18 doesn't mount it's a desktop mixer and the aux sends are not xlr, they are 1/4 " so what kind of cable do i use. I have tried mono on each end and stereo on each end but only gets one ear. if we pull the jack out a little we get stereo. So do i need stereo on one end and mono on the other ?

@66fitton

2 жыл бұрын

What you're doing is the actual cheapest fix. The aux sends are mono but you need two signals for headphones. Tip-sleeve 1/4 inch out of aux send and Tip-ring-sleeve into headphone amp is the other way to get it working. You have to use the proper cable. Regular patch cables for guitars are 2 core. You need 3 core. Basically a mic cable. If you have an old one cut the ends off and make your own tip-sleeve to tip-ring-sleeve and your good. Plenty of youtube vids on how to wire them up.

Surely the aux outs on the xr can be xlr to3.5 jacks as the individual mixes and volumes can be done on the ipad or tablet, so that makes the HA redundant??

Do you hear in both sides of the headphone? Or do u need a special cable or push the mono/stereo button? Can you explain please

@emmettsmusictutorialsetc9331

2 жыл бұрын

I hear both sides! I keep my monitor on mono.

I don't understand the need of the HA8000. I'm sorry. For my podcast I set up 4 microphones one for each participant and I set up 3 AUX to connect the headsets plus the phones output for me. At the AUX I plug a XLR female to 1/4" female conversor and... that's it. Every podcaster plug their headphone to those conversors and all works. So the function of the HA8000 is not clear to me. I would really appreciate you or someone comments on thus. Thank you very much.

@emmettsmusictutorialsetc9331

2 жыл бұрын

I see your point! You are right! The HA 8000 gives more power to the iems without having to crank up the gain on the xr18. A cleaner sound. You probably could bypass it though, and keep it simpler

@tejedor1967

2 жыл бұрын

@@emmettsmusictutorialsetc9331 Thank you for the information. For a podcast is good enough.

@66fitton

2 жыл бұрын

@@tejedor1967 Yes for a podcast. The idea behind the HA8000 is to boost the levels coming out the headphones. You wouldn't hear a thing if you had a drummer playing 10 feet behind you with just the out from the aux sends. Good point you made for podcasters. This is extra money spent for no good reason.

Are headphone amps necessary? Can't you just go directly out of the aux?

Very helpful, thank you!

the biggest con of the xr18 is the 6 aux. 8 would be better. for 4x stereo iem.

We use Behringer XR18 and Behringer Powerplay P2 (38€ per person) Than you need only 1 XLR per person. Aux out to Powerplay.Thats it.Safer connection because XLR lock in and because of the belt clip no kabelweight that pulls on the headphones.and volume control on the belt.

@wangxiaoclark

2 жыл бұрын

Is that a mono for the p2 monitor or a stereo?

@MonkeyKingBooking

2 жыл бұрын

@@wangxiaoclark you can switch inside the Behringer Powerplay PM2 between stereo or mono

Hello, can I connect the Behringer p16D and the p16M to a Yamaha TF3 digital mixer with a DANTE card in the back and a Yamaha Tio1608D stage box, can I do this in the following order: Yamaha TF3, Dante Card, Cat5e, Yamaha Tio1608D stage box, BEHRINGER P16D and P16M. Can I do this?. Thanks

thanks for the video

Can I use the direct inputs of all 8 channels in the powerplay as stereo? So that I can do stereo monitor mixes on a mixer that has 16 aux outs?

Really helpful!

Hello I hope your well, sorry if my question is a little bit (or a lot) dumb, but am new at this. Your tutorial is very helpful but I am a little confused ont eh HA8000 part. So the XR18 of course allows individual mixes for each aux out. i.e. Aux one can had different levels of all the inpust , drums bas etc, so each aux hears the whol band albeit in their own prefernece of levels, now when connected to the ha8000 in the individual direct ins at the back, I thought these inputs can be heard by all headphones? is that right or is it only the mains in that can be heard by all.

@alejandrovictoricavega3222

Жыл бұрын

Can be both ways... you can have the same input signal for all the headphones OR a different input for each headphone out.

thanks

How much for one of them Milwaukee screw guns?

@emmettsmusictutorialsetc9331

3 жыл бұрын

toolsteal.com/products/milwaukee-2892-22ct-m18-compact-brushless-2-tool-combo-kit-drill-driver-impact-driver-new

the biden edit 😂😂 so good bro thank you! god bless you for this video!!!!

Awesome video I have the HA4700 version only 4 channels so that means i would only need to use the 4aux on the xr18. but if we have more than 4 people in our band then is it possible that the 2 person will share a head phone? since there is a headphone out in the front and in the back?

@emmettsmusictutorialsetc9331

2 жыл бұрын

Yes you can buy splitters so that more than one person can listen per output monitor line!

@emmettsmusictutorialsetc9331

2 жыл бұрын

You could get a splitter that could split one channel into two. But you must realize that both of those channels would be exactly the same, because they’re coming from the same aux output. Here is link below: DISINO XLR Female to Dual 1/4 inch Y Splitter Cable,Female XLR to Double 6.35mm Mono TS Plug Mic Audio Converter Adapter Cord - 10 feet www.amazon.com/dp/B089WDWPKQ/ref=cm_sw_r_cp_api_glt_fabc_MPYNMYFJYR95HR2EK014?_encoding=UTF8&psc=1

@66fitton

2 жыл бұрын

You can just plug another set in the back. I think he misunderstood your question.

Hello Bro. Podrías hacer este video con subtítulos a español. Me sería de gran ayuda.

Question: the XLR out from each of the digital mixer is a stereo or a mono? When it’s into the HA800 I assume it’s an unbalanced steep that goes into the HA800?

@66fitton

2 жыл бұрын

The XLR out's are mono. The signal remains balanced if you use TRS 1/4 inch going into the headphone amp. If you use regular tip-sleeve only 1/4 inch then the signal becomes unbalanced. No harm done. Either way works.

@66fitton

2 жыл бұрын

Better off unbalanced as you won't get phasing issues in your headphones.

I have a question please… can the XAir be used as a stage box connecting it to a bigger console

@bjarkenielsen8515

2 жыл бұрын

No

onde comprar estas orelhas ?

Is there a solution for a cleaner wiring from the headphone?

@emmettsmusictutorialsetc9331

2 жыл бұрын

D'Addario XLR Female to 1/4 Inch Female Balanced Adaptor smile.amazon.com/dp/B0002E51AI/ref=cm_sw_r_cp_api_i_4AB3BGQW94ZWRRRFT6YT?_encoding=UTF8&psc=1

Hello sir, great video. I just have a question. Is there any way to increase the AUX output? Cos there's 8 members in my band, and this XR18 only comes 6 AUX Output.

@emmettsmusictutorialsetc9331

3 жыл бұрын

Thanks for the question. You could get a splitter that could split one channel into two. But you must realize that both of those channels would be exactly the same, because they’re coming from the same aux output. Here is link below: DISINO XLR Female to Dual 1/4 inch Y Splitter Cable,Female XLR to Double 6.35mm Mono TS Plug Mic Audio Converter Adapter Cord - 10 feet www.amazon.com/dp/B089WDWPKQ/ref=cm_sw_r_cp_api_glt_fabc_MPYNMYFJYR95HR2EK014?_encoding=UTF8&psc=1

@aimanisahac

3 жыл бұрын

@@emmettsmusictutorialsetc9331 Got it! Thank you so much!!!

@jlc2093

2 жыл бұрын

I’m pretty sure you don’t need that many mixes They need to comprimise

@aimanisahac

2 жыл бұрын

@@jlc2093 Actually I do. As a singing group, it's better if each of us have an IEM.

@PlatypusPerspective

2 жыл бұрын

@@aimanisahac You can add further monitoring using Ultranet, but there is added cost as a LAN cable runs to a small monitoring mixer per station. I'm just about to set up an XR18 system including one P16 Ultranet personal Monitor to see how well it functions in practice. We already have the HA8000 method working on another installation. kzread.info/dash/bejne/apd4w5WhYrHFiNY.html

...wOw..!

I don’t even own one of these. Why am I watching this?

Don’t get KZs… too much nasty mids and don’t fit all that great…BASN IEMs are my go to now… $99 for triple driver per ear and they sound amazing balanced and Cristal clear, they fit way better around the ear and come with 12 sets of ear tips to fit in your ear KZs are absolute trash in comparison!

This is all great until you lose Wi-Fi then what

@emmettsmusictutorialsetc9331

Жыл бұрын

Both the built in router and any wifi 'addon" router works for this. its not internet. It gives off its own signal. You can be way out in Africa, and it still works awesome!

Hello, can I connect the Behringer p16D and the p16M to a Yamaha TF3 digital mixer with a DANTE card in the back and a Yamaha Tio1608D stage box, can I do this in the following order: Yamaha TF3, Dante Card, Cat5e, Yamaha Tio1608D stage box, BEHRINGER P16D and P16M. Can I do this?. Thanks