I followed this exact video to set up my two trees engraver and it worked to a T. Thank you so much for putting out amazing content like this. It was super helpful and made all the headaches I had go away with this simple video. Appreciate it man

That is a very familiar voice, just bought a laser and was not expecting that. Great video!

THANKS so much for posting this...just got this for xmas and am still learning.

This is a really excellent and helpful video. Professional, clear and step step instructions for the beginner. Rare t find such clarity and simplicity!

@lightburnsoftware7189

6 ай бұрын

Thank you for the kind words!

Many thanks, you saved me from frustration.. your explanation is apt and fit for purposes, very helpful

Excellent video for a first timer like me. Thank you!

Awesome introductory video to get me up and running with my brand new Sculpfun S9. Many thanks for sharing. 👍👍👍

Fabulous and well presented, thank you

Super amazing, thank you so much!

Hi...I just used the trial version, but when I connect the Atomstack a5 pro, when running the product, the actual size is not the same as the number shown on the machine, so I will adjust it later, thanks

strongly recommend lightburn, it saves lots of trouble specially to those machines without limit switches.

Is the driver mentioned in the Mac install portion a must? I have been using LightBurn with my Comgrow Z1 successfully w/o the driver. Only problem is that when I initially (and even after a couple of weeks) my laser doesn't show up in the devices panel.

I have been using the S9 since early Dec. 2021. In combination with lightburn and cutting solid wood up to 1 /4". great combo!

@Bogaloo1232

2 жыл бұрын

How many passes/minutes does it take to cut such thick wood? Thanks!

@Townie001

2 жыл бұрын

@@Bogaloo1232 I've been using 4 passes @ 3min for oak,ash and , bigleaf maple and my favorite mahogany.

Gracias a este video por fin he podido conectar mi láser a lightburn!

@angelsoto874

Жыл бұрын

Te puedo dar clases gratuitas de cómo usar el programa

Excellent video.😊

hi could you confirm that lightburn are working on the camera settings for the gweike cloud co2 laser engraver cheers Tim

can sculpfun s9 5.5w Diode cut laminate or arcylic? if yes.. can any advice what is the setting should i do?

Which version of Lightburn G-Code or DSP?

LightBurn is just not seeing my Sculpfun S9 laser. I manually installed it and when I check on my Device manager I dont find it anywhere. In my COMS & LPT I only see the Serial CH340....PLEASE assist..

Is there a link for drivers for other engravers like atomstack?

a few months ago I bought a Sculpfun S9 through an online shop in Indonesia, the first time I installed it, it worked well, I haven't used it for a long time, I tried to use it again, but the machine didn't work according to the design I had, then I tried to uninstall the application, then when I tried to reinstall the application, sculpfun was not detected in the lightburn app, please help, thank you

@LightBurn Software I recently got my first laser engraver / cutter (Comgrow Z1) and I will be using Lightburn. And will mostly be using it to cut balsa R/C airplane kits from PDF plans and I was wondering if you could do e tutorial on using / converting PDF files, resizing and doing tab splices for parts that are too big?

Seems product is awesome... But on Ubuntu lightburn don't show bottom navigation bar ... Tried in many Linux version ... Same issue... How can fix it before thinking to buy it

I just bought a s9 and was looking to get a good soft, is there a voucher code for this?

Important for Mac owners. Recent Mac operating systems already have an Apple driver for the LightBurn, and that installing the OEM version causes unnecessary conflicts. Might be helpful to update the video.

@Tarologe

6 ай бұрын

what gives the laser t-55 speed?

Good day hope thanks for the video i followed it step by step,i just have one problem,everything fires up and works like it should but no engraving or cutting is happening, its a brand new Sculpfun s10,the lazer comes on and if i hit start it starts to move over where it should do the project but it is not engraving, do you have any advise for me please.

Thank you very much!

Please tell me….Do you find it “Slams” against the side bars without Limit Switches..?? Are there any “Switches” that are compatible with this machine before I think of purchasing it..?? And can you give me the Canadian Link to where I purchase the LightBurn Software for this Sculpfun S6 Pro….I Don’t want to purchase the wrong software for it Please let me know

This is awesome my friend. I'm a dummie when it comes to this stuff so thanks very much for the help. It's massively appreciated. I think I clicked on that start up button u said not to touch. How can I make sure that's off without having to go through the whole set up again bro? Is there a way to make sure I don't have to start all over again?

Hello, Is it 410x400 or 400x410??

Спасибо автору за подробную инструкцию. Узнал много нового. Спасибо.

THANK YOU!!!

Hello, When I press and hold shift key + frame , just head is moving as frame size but without light, please how can I resolve it, and is the laser 5.5W can cut acrylic as 6mm ?

@lightburnsoftware7189

7 ай бұрын

Did you enable the laser fire button? The value set in the fire button is what will be used when framing so you may need to bump it ever so slightly to find the minimum required power that you are able to see. 5.5W is great for engraving but may struggle with cutting. Diode lasers will not cut clear acrylic so if you are wanting to cut you will want an opaque acrylic. Black is the easiest to cut with a diode.

Hi, do i use the same driver for the sculpfun s10? my LB with the ch340 does not recognize the s10. I installed the driver after having already used LB by manually adding the s10, now I have seen that it needs a driver, and after installing and restarting it, it automatically does not recognize any laser. however i add manual and works but im not sure if the setting is correct. Another question is how can I enlarge the line size when drawing in *Draw line mode?

@lightburnsoftware7189

Жыл бұрын

Yes, it should be the same CH340 driver for the various SCULPFUN lasers. If you are having issues with connection please contact our support team support@lightburnsoftware.com As for the line size is there a reason you are wanting to make it larger in size? Is it to see easier on the computer or so that it engraves a wider line?

I have just brought a brand new Sculpfun S9 and have assembled it. When I am using it I'm finding that the laser head assembly is very loose on the rail and is wobbling as it is moving along. This is creating uneven and squiggly lines. It looks like the bottom guide wheel is too low but there isn't any way to adjust this wheel up. Can anyone help with any suggestions please

@lightburnsoftware7189

2 жыл бұрын

I just took a look at the one here and there is an eccentric nut on the back of the carriage which will allow you to bring the vslot wheel closer/further away from the rail. It is typically used on roller wheels to help create the needed stiffness for the motion. It is on the bottom of both side of the Y axis as well as on the bottom of where the x axis motor is. You will need a small spanner wrench to reach and turn it. Feel free to reach out to us at support@lightburnsoftware.com if you have any other questions.

Nice video

Lightburn did not find my Sculpfun S9, I have the driver installed, and if I manually setup Grbl device it is working but engraving wrong moving in sig-zag when should cut a circle the image look almost like a gear.. With Laser Grbl it is working fine. What is wrong in Lightburn?

@lightburnsoftware7189

11 ай бұрын

That happens if you use a pirated copy instead of an official one downloaded from our website.

Still can’t find my laser , can you help me 😢😢😢,

I connected my sculpfun a couple of weeks ago but have not had time to use it. when getting back on my laser is not in with the graph in lightburn. When creating a circle in lightburn on the far left the laser start in the far right. I am not sure how to rest the two so they match. Can anyone help?

@lightburnsoftware7189

2 жыл бұрын

The most common cause for this is that the origin is not set correctly. I would confirm that you have it set to the front left. If you are still having issues send our support team an email at support@lightburnsoftware.com

everything worked for me up to the fire button that never showed up and the move button is not there either. I have cut/layer, console. camera control and, variable text.

@lightburnsoftware7189

10 ай бұрын

If the Move window is not visible you will need to enable it. This can be done by clicking on the Window dropdown in the top toolbar and clicking "Move". If it is already checked and not visible it was likely undocked and you can select "Reset to Default Layout" at the top of that same Window dropdown menu to restore it.

Thank you a lot for the video. I have a question about the speed you selecting 5000 and respect. 2000 this is mm/s. What is the top speed of the sculpfun. I don't see how this thing can do 5 meter/sec. I think the max of this machine is like 300mm/s

@lightburnsoftware7189

2 жыл бұрын

All of the speeds shown here are in mm/minute. The top speed of this machine is 6000 mm/minute, or 100 mm/second.

I got another machine s30 pro. but when I follow all the steps and try to make a simple text design it just makes lines. instead of the text

@lightburnsoftware7189

Жыл бұрын

If you are getting lines instead of shapes it could be a handful of things: - wire being loose for a motor - speeds to quick causing motors to skip steps - a pulley on a motor being loose - a belt being loose Is your preview window showing the text you are expecting? If you try the above and are still having issues email our team at support@lightburnsoftware.com.

Do you have any tutorial with Ubuntu? I have bought a Sculpfun S9 and I already installed the Lightburn but nothing that I do is enough to make it work.

@lightburnsoftware7189

Жыл бұрын

We do not have a tutorial for Linux specifically. This is something I can take up with the team. Please send us an email at support@lightburnsoftware.com for help with this.

The video was nicely done. I watched it all the way through, and then downloaded Lightburn and the CH340 driver. However, I got an error trying to load the driver. It failed and I can't figure out what the problem is. I have a Toshiba laptop with Windows 10. I was able to load Lightburn, but of course it will not find my Sculpfun S9 because of the driver. Any thoughts on what I should check? Thx.

@lightburnsoftware7189

Жыл бұрын

What is the error that you are getting when trying to install the driver? I would double check that you are downloading the correct version under Windows, run as administrator, and click uninstall first to remove anything that may already be installed. sparks.gogo.co.nz/ch340.html If you are still having issues after that please contact our support team support@lightburnsoftware.com

@nancyhomrich5275

Жыл бұрын

@@lightburnsoftware7189 thank you for your response. First, my Firewall quarantined the driver download, and once I figure out how to allow it, I tried the install and just got a window with the error "Install Failed". I restarted my computer, hooked up the laser and turned it on, went through "find my device" and it found it. I'm not sure how it worked, but it did. I followed your video again and was able to make my first project with text and an outline. I couldn't have done it without your step by step video. Many Thanks!

help plz when I hit the frame button my s30 does not move at all

@lightburnsoftware7189

Жыл бұрын

Is there an error listed in the console? I would first check that there is no error in console. If there is that would be the first thing to address. If not, please take some screenshots of your project and send that along with the project to support@lightburnsoftware.com

26:18 There is no "Move" tab on mine! Only Cut/Layers, Console, Camera Control, Variable Text. Ugh, Im brand new to this so Im following every step to learn and it's so hard when the video doesn't line up with the software. :( What am I supposed to click on? I have an S6 Pro but didn't see an S6 pro video in your library so I figured the S9 would be similar enough.

@lightburnsoftware7189

Жыл бұрын

If you are seeing camera control and variable text that means the original layout has been edited. You can easily fix this my clicking "Reset to default layout" under the "Windows" menu or enabling the "Move" window from the "Windows" menu. I would watch our Workspace video: kzread.info/dash/bejne/pmSklrdrlbasgdY.html

Hi, I just bought an S9 and strangely the work place in LightBurn seems to be mirrored when the laser works. So if I want text "TEST" to be correct and readable I have to mirror it in the LightBurn so when the laser does it's job it comes correct. Is there any option for "mirrored mode" or something? Thanks

@lightburnsoftware7189

5 ай бұрын

Read here: docs.lightburnsoftware.com/Troubleshooting-Output.html#output-is-mirrored-or-backwards

@vedranstipic4435

5 ай бұрын

Thanks, i got it! cheers@@lightburnsoftware7189

I need help. Lightburn doesn't recognize the sculpfun s9, I have a 2020 M1 macbook

@lightburnsoftware7189

Жыл бұрын

Did you install the needed driver? The most common issues are missing driver or a bad USB cable. Those would be the first things to check.

I like this video thanks. But I’m have trouble with my Pergear LaserStorm S5 . Trying to connect it to LightBurn. I clicked. Find my Laser but it can’t see it. The power is on the fan is running. The screen is on but blank is that supposed to be like that? I tried it multiple times and still light burn cannot find my laser. Do I need to put the TF CARD IN ? Please help me! ! 😫

@lightburnsoftware7189

6 ай бұрын

Have you successfully used the laser previously? Does the manufacturer have a setup guide for LightBurn with that laser? It could also be that a driver is needed for it. If you are still having issues contact our team - support@lightburnsoftware.com

@vincentlekei1969

6 ай бұрын

@@lightburnsoftware7189 hay thanks I got it going now 😁🤓

Hi! Nice and detailed video!! I just got the sculpfun 6 pro, I have no idea at all on how I can use this machine, are this instructions the same for the 6 pro as well or do I have to do something different to start using it! I download the LightBurn already but I was watching your video and you also mention to download another driver? Could you guide me through this process ? I really appreciate it! Thank you very much

@lightburnsoftware7189

3 ай бұрын

We haven't tested the 6 pro specifically but looking around it looks like it should be compatible. The most common driver used is that same CH340 so I would follow along with the guide and see if that works for you. If you run into any issues contact our support team at support@lightburnsoftware.com

@ErikaPauwells

3 ай бұрын

Thank you very much! I will try and let you know how it goes, thanks again for your time! I have no idea at all on how to use lasers machines so wish me luck!!

how come when i try to download the drive i get a message that says " the driver is sucessfully preinstalled in advance"?

@lightburnsoftware7189

Жыл бұрын

Some of the verbiage doesnt make a whole lot of sense with the driver installer. If you are able to connect to the laser then you already have the driver. Through the installer you can also uninstall and reinstall the driver to see if that works.

I installed the driver. I got to "extract all" but nothing after that. I have windows 11. Any ideas?

@lightburnsoftware7189

Жыл бұрын

If you installed the driver are you now connected? Or you are not able to install the driver because you cannot get it to extract?

Thank you for the tutorial. However I am having problems with the absolute coords. I have discovered that when you first start LightBurn it does not set itself to x = 0 and Y = 0, but rather X = -56.7 and Y = -54.88. So if with the sculpfun turned off I move the head to bottom left and then turn it on LightBurn thinks that 0,0 is actually X:56.7, Y:54.88 up from the bottom left of the corner of the Sculpfun and therefore throwing everything out by this distance. Hope there is an easy solution for this.

@mikek9315

2 жыл бұрын

@@lightburnsoftware7189 Thanks for the help that worked. I set it up as a macro. Does that mean that the Sculpfun has some sort of a bug in the firmware?

@srl3489

2 жыл бұрын

@@lightburnsoftware7189 Saw somewhere that you need to position the S9 laser all the way to front left and then turn on the machine. Hope this helps.

@ashleybrewer3326

2 жыл бұрын

Where do you set that up at? I am having the same issue😭

@mikek9315

2 жыл бұрын

@@ashleybrewer3326 Hey Ashley. Its under the “Console” Tab. There are some buttons labeled “Macro1”, “Macro2” etc. Right mouse click on one of these buttons and you can set it up with the commands and a name. Have to say I still found it a pain even after this as it would randomly forget the 0,0 position after doing a “Frame” etc. So I tend to stick to using “Current Position” most of the time.

please help.. my sculfun s9 is moving so slow while framing

@lightburnsoftware7189

6 ай бұрын

Framing speed is set in the Move window. There is a text box for speed and that is what the framing speed is based off of.

Hello I Just purchased this exact model what software is required for the S9 and how much is it

@lightburnsoftware7189

Жыл бұрын

The S9 requires the gcode license. Here is a link to the license page that also contains more information about the license: lightburnsoftware.com/collections/frontpage/products/lightburn-gcode

@Lightburn - I'm using a Mac OS Monterrey version 12.3.1. I tried the install 3x and also followed the terminal instructions for any potential conflicts with existing drivers and nothing is working. I have the Sculpfun S9 that I just got today. I also tried going into safe mode/recovery mode and nothing seems to be working. Any suggestions?

@aldohernandez2119

2 жыл бұрын

I have the same problem, I have macos monterey and my s9 does not detect me even with the driver installed, if you know of a solution or you have already solved it, would you help me please

@gramon74

2 жыл бұрын

@@aldohernandez2119 I was able to set up a manual setting using GRBL. It took me installing and reinstalling both the driver and the software multiple times before I got it to work. I could never get it to auto detect but the manual set up finally worked.

@CarlottaGuatteri

2 жыл бұрын

​ @Grace Ramon i have the same problem with bir sur, i can't connect the laser with my mac

@leandrorodriguez7978

Жыл бұрын

Were you able to solve it?

@CarlottaGuatteri

Жыл бұрын

@@leandrorodriguez7978 No, i have install the laser manualy but

Are there any tips or tricks for connecting an S6 Pro to my Mac through your software? I can't get it to recognize the laser.

@aldohernandez2119

2 жыл бұрын

I have the same problem, I have macos monterey and my s9 does not detect me even with the driver installed, if you know of a solution or you have already solved it, would you help me please

@JoyDVshop

2 жыл бұрын

​@@aldohernandez2119 select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

@JoyDVshop

2 жыл бұрын

select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

@Nitramphoto

2 жыл бұрын

@@JoyDVshop thanks, I’ll try that!

Hello...When I do the fill and then go to the preview, the pink shaded area starts way before my text and ends way after. It is not as in your example where the pink shaded area starts at the first letter of LightBurn and ends at the last letter. Please explain this. Thank You

@lightburnsoftware7189

Жыл бұрын

If you blindly entered “3000” as a speed, ignoring the units used, and your system is set to mm/sec instead of mm/min or inches/min instead of mm/min, either of those would be *much* faster. That would be the most likely difference. You might also have turned up the overscan amount - the default is 2.5%, but a higher amount would add more overshoot.

@fazelhassan

Жыл бұрын

@@lightburnsoftware7189 Thank You. But, as a first timer, how would I have known to change to mm/min because I didn't even know what the default setting was. Also, I do not even know what an overscan amount is..where would I check this ?

@lightburnsoftware7189

Жыл бұрын

@@fazelhassan - It does not matter which setting you choose, you just can't blindly assume that if you enter "3000" that LightBurn knows what units you meant. If you see a speed value on the internet, it should include the units. If the speed was 3000 mm/min, that is the same as 50 mm/sec (divide by 60 to convert /min into /sec). How you choose to display the speed is a preference, and that can be changed in the settings. Overscanning is a setting on Fill and Image layers. docs.lightburnsoftware.com/UI/CutSettings/CutSettings-Fill.html#overscanning

Hope I get an answer here.... Everything works except my laser doesnt fire. I have been using this laser for about 4 months. I came out..turned it on...everything works and cycles...but no laser! The fan light comes on....but the laser firing light on the module never comes on and no laser.....

@lightburnsoftware7189

Жыл бұрын

If it is not firing I would check your wiring to make sure none of the cables in the connectors are damaged or gave come unplugged. If you have tried increasing the power and still are not getting output I would lean toward it being hardware related.

my sculpfun S9 is not auto detected by LightBurn. Why?

@lightburnsoftware7189

Жыл бұрын

Did you install the ch340 driver? Do you have any other program open that may be connecting to the device? Make sure it’s powered on, try a different usb port, and try a different usb cable.

How long or number of hours can the laser machine be used continuously or without stopping?

@lightburnsoftware7189

Жыл бұрын

A lot of this will depend on the specific module. The quality of the components used, as well as heat dissipation are big factors here. It would be worth reaching out to the manufacturer for the laser purchases to see if they have recommended continuous run time.

@jay.r8848

Жыл бұрын

Thank you very much

My mouthpiece broke with sculpfun s30 pro laser lenses where I can buy them

@lightburnsoftware7189

11 ай бұрын

Are you referring to the acrylic cover on the laser head? Those are typically not standard sized. I would reach out directly to Sculpfun.

All was going well until I tried to press the o in left column it won't activate any ideas please thanks

@lightburnsoftware7189

10 ай бұрын

Are you referring to the Offset tool? You need to select the items you are wanting to offset to make them active before you can click the Offset tool.

@user-sr7jg7re4s

10 ай бұрын

Many thanks, your help is invaluable

Why is my laser-only reading half of my text. 1/20/23 time 1:30 pm

Hello, thanks for video. Unfortunately Lightburn can't find my laser (Sculpfun s10) even with the steps you provided us ...

@christyhorner2316

2 жыл бұрын

Did you find a solution? Mine will not detect my s9. :(

@JoyDVshop

2 жыл бұрын

@@christyhorner2316 select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

@JoyDVshop

2 жыл бұрын

select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

Hi can help me. I use Mac cannot connect devices.for sculpfun s9

@JoyDVshop

2 жыл бұрын

select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

@veepho

2 жыл бұрын

@@JoyDVshop Thanks.

Is it available only for Mac OS or have a windows version ?

@lightburnsoftware7189

Жыл бұрын

Windows, Mac, and Linux: lightburnsoftware.com/pages/trial-version-try-before-you-buy

Perfect....

Hola buenos dias, excelente y educativo video, una pregunta, tu sabes porque mi sculpfun s9( lo trabajo con LightBurn) se detiene en mitad de un corte o grabado y ya no continúa?, necesito hacerlo en dos partes para poder terminar, agradecería se me pudiera ayudar, gracias

@lightburnsoftware7189

Жыл бұрын

Si un trabajo se detiene a la mitad, es probable que haya un error que lo esté causando. Cuando se detiene, ¿hay algún resultado en la ventana de la consola? tal vez y error de activación? También podría valer la pena probar con un cable USB diferente. Si aún tiene problemas, comuníquese con nuestro equipo: support@lightburnsoftware.com

@bonifacioluna5211

Жыл бұрын

@@lightburnsoftware7189 GRacias por tu pronta respuesta, me presenta al inicio del trabajo ERROR 5 y cuando se detiene presenta lo siguiente Layer C07 o�H�ok o�H�ok �ok �ok

Necesito ayuda. Lightburn no reconoce la sculpfun s9, tengo una macbook 2020 M1

@angelsoto874

Жыл бұрын

Doy clases gratis escribes si quiere ayuda y clases gratuitas

@maryreyes6033

Жыл бұрын

@@angelsoto874 Saludos y disculpe la molestia. Necesito ayuda con mi laser S9. Tengo frustración por no poder resolver el problema que tengo con mi maquina. No conozco quien me pueda ayudar, es por eso que me tome el atrevimiento de escribirle y pedirle ayuda.

Downloaded lightburn today and tried to connect my Sculpfun s9 and the software couldn't find it. I tried manually but my equipment wasn't listed in Lightburn. What gives? tell me how you did it please.

@gramon74

2 жыл бұрын

I'm having the same issue - did anyone respond to you yet?

@aldohernandez2119

2 жыл бұрын

@@gramon74 have the same problem, someone already solved it

@Jimbojenkins

2 жыл бұрын

No answers yet!

@alik.p3582

2 жыл бұрын

I am also having same problem, I tried on my Windows its works but not on Mac, anyone can help?

@JoyDVshop

2 жыл бұрын

@@alik.p3582 select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

How much quantity can cut at a time sir

@lightburnsoftware7189

Жыл бұрын

Cutting ability will depend on the specific laser and the material. Diode lasers have a pretty broad range of power from 5W up to 40W with combined beams. If there is a specific laser you are looking at the manufacturer likely has some recommended values or specs.

Pls help me with settings for black granite.

@lightburnsoftware7189

Жыл бұрын

You will want to run a test grid to get the best settings for your laser on the specific granite. The settings will vary from machine to machine. If you want a baseline it may be worth reaching out to the manufacturer to see if they can provide that.

@lihaciudaniel

Жыл бұрын

@@lightburnsoftware7189 ok

WHAT CAN I DO IF I DONT HAVE THE MEASUREMENT TOOL, HOW CAN I DO IT? THE VIDEO WAS VERY HELPFUL AND CLEAR, THANK YOU.

@chrischantrell9341

2 ай бұрын

It's just a 20mm block.

sir, i have issue ...my S9 can't cutting following my artwork... i make rectangle the results s9 perfect.. but when i do circle the results is not circle.. i don't know is it software or s9 issues..help me pls

@lightburnsoftware7189

Жыл бұрын

It would be best if you could show a picture, so we can see the results, but you can’t do that here. Does the circle just look a little funny, or is it made of jagged lines that look like scribbles?

@jasniHD

Жыл бұрын

@@lightburnsoftware7189 the circle like jigjag and line is not square

@lightburnsoftware7189

Жыл бұрын

@@jasniHD most likely you are using a cracked copy of the software. We automatically detect this and make it fail in a number of frustrating ways. Download the official version from our website and it will not do this.

@jasniHD

Жыл бұрын

@@lightburnsoftware7189 i have to uninstall all? i have try trial version then they ask for license key.. do i have email ?

@lightburnsoftware7189

Жыл бұрын

@@jasniHD if you have already used the trial you can email support@lightburnsoftware.com to reset it.

Hallo hii .if outside line i want to cut,how?

@limitkazuyaofficial

2 жыл бұрын

I got 3mm arcylic. I want to do name Then inside name i want to angrave to 1mm And outline iwant to cut . How do i setting on lightburn.tq

@limitkazuyaofficial

2 жыл бұрын

kzread.info/dash/bejne/jHaYp9uyqs_Pcdo.html Like this.but using s6 pro..

@limitkazuyaofficial

2 жыл бұрын

Plss do tutorial sir tq

Is there a way to get to you call someone for ordering? I would like to speak to a real person.

@lightburnsoftware7189

Жыл бұрын

Unfortunately we do not offer phone support. If you need help with purchasing, email support@lightburnsoftware.com and we’ll help you.

hi I cannot set up . don 't have device

@JoyDVshop

2 жыл бұрын

select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

Why does Error 9 occur?

@lightburnsoftware7189

Жыл бұрын

Error 9 can be caused by a number of things. It is shown when the machine goes into a lock state that is typically accompanied by additional info. -Flame detector on Ortur machines -Changes made when using a rotary -Machine not homing correctly To name a few. If you are getting Error 9 look in the console before and see if there is any other information or error being shown along with it.

Esse software é comprado?....

@angelsoto874

Жыл бұрын

Si cuesta la licencia 60 dollar el programa lo bajas gratis si quieres

@angelsoto874

Жыл бұрын

Doy clases gratis

I forgot to ask u the question about the CH340 DRIVER bro.. If my computer picked up the device then that means I don't need to install the driver?? Is that correct? Thanks for answer in advance bro.. I will say thanks again if I get an answer from u anyways.. Like I said I need all the help I can get.. LMAO

When multiple cuts are required, what better way than duplicating the drawing on multiple layers.

@lightburnsoftware7189

2 жыл бұрын

Multiple cuts of the same shape? If so then you will want to increase the "Pass Count" which can be found at the bottom of the Cuts/Layers window.

@user-hl9pi6lu1n

2 жыл бұрын

@@lightburnsoftware7189 一个图纸上存在多个路径时，如果我输入pass count：10，他会切割第一个路径10次，然后切割下一个路径10次...但是我希望他切割所有路径一次后，然后下一次，下一次，下一次.... When there are multiple paths on one drawing, if I enter pass count: 10, he will cut the first path 10 times, then the next path 10 times... But I want him to cut all the paths once, then the next time , next time, next time....

Ugh. I just got my s9, installed the driver and LightBurn and it will not detect my machine. Getting so frustrated. :(

@JoyDVshop

2 жыл бұрын

select the choice GRBL in the list, cause sculpfun doesn't show up. But the selection GRBL works just fine.

@Ryan-ke5km

Жыл бұрын

@@JoyDVshop having the same problem. Did that and it is giving me a transfer error when i try to run g code.

Sounds like the Modbot guy