This video goes through the typical steps involved to ready the Sunnen CV-616 Power Stroke machine for honing a block.
Жүктеу.....
Пікірлер: 29
@psiturbo Жыл бұрын
very interesting, never thought there were so many steps, and measurements.
@dirtlump Жыл бұрын
Yep, Great Machine that still performs very well !
@miahmuffly4261 Жыл бұрын
Just started running one of these at work
@whiplashmachine
Жыл бұрын
Right on bud👍 hope you enjoy it🍻
@boffo9114 ай бұрын
Can you show more of the "Nascar bar" for dwelling in any location & the version you use?
@user-ix2ro4jz6e Жыл бұрын
Just bought this hone and there are no videos in depth of set up and how the wheel under the crown works would love to see a full tutorial on set up and running a .010 oversize
@bcbloc022 жыл бұрын
Do you torque plate hone every block?
@whiplashmachine
2 жыл бұрын
Just about.
@SAMEH22SS2 жыл бұрын
Good evening, How to adjust the cerebral stroke to stand where you want it in this machine
@mackk1232 жыл бұрын
4:55 makin us jump there
@kyledaymon5322 жыл бұрын
How do u use the stone installer tool to set the stones in the holders . I've tried looking on here and can't find much info
@whiplashmachine
Жыл бұрын
Sorry I missed this question. Would have made a good video reply. Have tou found the answer yet?
@lookoutndava69172 жыл бұрын
What machins is this one
@nicd5439 Жыл бұрын
How do you control the plunge speed, which in turn controls crosshatch angle?
@miahmuffly4261
Жыл бұрын
There's belts in the head that you move onto different pulleys to change the speed
@nextgen19392 жыл бұрын
I use the tool to set my stones up with also. Do you ever use diamonds on your hone?
@whiplashmachine
2 жыл бұрын
No, just the Sunnen UHM stones.
@nextgen1939
2 жыл бұрын
@@whiplashmachine I have a set of cores diamonds. You can hone out .020 in no time.
@whiplashmachine
2 жыл бұрын
@@nextgen1939 a couple shops around here run diamond stones bit they have the much newer machines. I rough bore almost everything so rarely have more than 5 thou or so to remove. Unless going 20-30 or 30-40.
@nextgen1939
2 жыл бұрын
@@whiplashmachine The cv-616 can run diamonds pretty easy. I use the same honing head you have. The fixture is no different.
@nextgen1939
2 жыл бұрын
I am moving to a all diamond set up in February. I have a few new videos coming up this week. I think you will really like one of them.
@Etande11 ай бұрын
I use the same machine daily
@cesurozcan98152 жыл бұрын
Kolay gelsin bana hornama makinesi lazım yardımcı olursanız sevinirim motosiklet için
@serfilippiracing Жыл бұрын
Hello! Is the drive hydraulic?
@whiplashmachine
Жыл бұрын
Nope, it is driven by an electric motor and pulleys
@serfilippiracing
Жыл бұрын
@@whiplashmachine Is it comparable with the Chinese machine 3mb9817?
@whiplashmachine
Жыл бұрын
@@serfilippiracing not too sure, but these Sunnens have proven they can last for decades and hone thousands of blocks. I have my doubts that a chinese knockoff would compare. Plus, if I ever need parts or support, it is readily available for these Sunnen machines.
Пікірлер: 29
very interesting, never thought there were so many steps, and measurements.
Yep, Great Machine that still performs very well !
Just started running one of these at work
@whiplashmachine
Жыл бұрын
Right on bud👍 hope you enjoy it🍻
Can you show more of the "Nascar bar" for dwelling in any location & the version you use?
Just bought this hone and there are no videos in depth of set up and how the wheel under the crown works would love to see a full tutorial on set up and running a .010 oversize
Do you torque plate hone every block?
@whiplashmachine
2 жыл бұрын
Just about.
Good evening, How to adjust the cerebral stroke to stand where you want it in this machine
4:55 makin us jump there
How do u use the stone installer tool to set the stones in the holders . I've tried looking on here and can't find much info
@whiplashmachine
Жыл бұрын
Sorry I missed this question. Would have made a good video reply. Have tou found the answer yet?
What machins is this one
How do you control the plunge speed, which in turn controls crosshatch angle?
@miahmuffly4261
Жыл бұрын
There's belts in the head that you move onto different pulleys to change the speed
I use the tool to set my stones up with also. Do you ever use diamonds on your hone?
@whiplashmachine
2 жыл бұрын
No, just the Sunnen UHM stones.
@nextgen1939
2 жыл бұрын
@@whiplashmachine I have a set of cores diamonds. You can hone out .020 in no time.
@whiplashmachine
2 жыл бұрын
@@nextgen1939 a couple shops around here run diamond stones bit they have the much newer machines. I rough bore almost everything so rarely have more than 5 thou or so to remove. Unless going 20-30 or 30-40.
@nextgen1939
2 жыл бұрын
@@whiplashmachine The cv-616 can run diamonds pretty easy. I use the same honing head you have. The fixture is no different.
@nextgen1939
2 жыл бұрын
I am moving to a all diamond set up in February. I have a few new videos coming up this week. I think you will really like one of them.
I use the same machine daily
Kolay gelsin bana hornama makinesi lazım yardımcı olursanız sevinirim motosiklet için
Hello! Is the drive hydraulic?
@whiplashmachine
Жыл бұрын
Nope, it is driven by an electric motor and pulleys
@serfilippiracing
Жыл бұрын
@@whiplashmachine Is it comparable with the Chinese machine 3mb9817?
@whiplashmachine
Жыл бұрын
@@serfilippiracing not too sure, but these Sunnens have proven they can last for decades and hone thousands of blocks. I have my doubts that a chinese knockoff would compare. Plus, if I ever need parts or support, it is readily available for these Sunnen machines.