This video explains the setup and use of the AirWeights modular vacuum table system. For more information, visit: www.airweights.com
Жүктеу.....
Пікірлер: 19
@IsaBillions4 ай бұрын
I just have to watch this over and over when I miss my beautiful, authentic and Brilliant Son Jace! Who would ever do this CNC business without AIRWEIGHTS! Love being your Mom! xo
@IsaBillions8 ай бұрын
Genius upgrade that will revolutionize the CNC World... I love it!
@AirWeights
8 ай бұрын
That's the plan!
@aussiegolddogcnc3d4129 ай бұрын
Looks great mate. Love the vacuum clamping ideas. 😊
@AirWeights
9 ай бұрын
thanks!
@customwalldisplay9 ай бұрын
Wow I will be buying. I also have Onefinity machine. Can’t wait for next video because I cut 99% of my plastic parts through. Like to see how the to lates work
@AirWeights
9 ай бұрын
Thanks for your comment! There are several ways to achieve full cuts through your part (no tabs or onion skin). We will be providing several solutions including fixture plates, and the ability to use a sacrificial layer under the part.
@IsaBillions
8 ай бұрын
Can't wait ! @@AirWeights
@acerjuglans383
8 ай бұрын
@@AirWeightsI'm interested to see how you use a sacrificial board, as I already know the small vacuum pumps only have so much power.
@StrataBoy_Peosta4 ай бұрын
Instead of using two long pieces of grid gasket and then cutting two short pieces to fit between them you can place them in a pinwheel arrangement and never need to cut a short one.
@AirWeights
Ай бұрын
Great tip!
@p8ntblr13 ай бұрын
Can you leave the gaskets at those locations or do you have to reinstall after every use?
@AirWeights
3 ай бұрын
Absolutely, you can leave the gasket in place and quickly swap your part. You can even leave different gasket shapes on different locations of your table, and just open up the port you need, essentially leaving dedicated gaskets on the table for different sized parts. Any time you need to re-orient the gasket, it can be moved quickly and easily.
@OperationStackola2474 ай бұрын
Does the gasket material compress when vacuum is pulled, so that the workpiece is pulled flush to the AirWeight's grid-table thing? Or will the gasket material cause a gap between the AirWeight and workpiece?
@AirWeights
4 ай бұрын
The material will compress, as the vacuum pulls the material flat to the Airweights table. This approach ensures you maintain a consistent Z height, with the table surface serving as the same consistent hard stop.
@OperationStackola247
4 ай бұрын
Exactly what I wanted to know- thanks.@@AirWeights
@MaR6CiN26 күн бұрын
How long can you run a vacuum pump continuously ????
@AirWeights
26 күн бұрын
These vacuum pumps are rated for continuous use. We have tested them holding vacuum for periods over 24 hours non-stop with no issues.
Пікірлер: 19
I just have to watch this over and over when I miss my beautiful, authentic and Brilliant Son Jace! Who would ever do this CNC business without AIRWEIGHTS! Love being your Mom! xo
Genius upgrade that will revolutionize the CNC World... I love it!
@AirWeights
8 ай бұрын
That's the plan!
Looks great mate. Love the vacuum clamping ideas. 😊
@AirWeights
9 ай бұрын
thanks!
Wow I will be buying. I also have Onefinity machine. Can’t wait for next video because I cut 99% of my plastic parts through. Like to see how the to lates work
@AirWeights
9 ай бұрын
Thanks for your comment! There are several ways to achieve full cuts through your part (no tabs or onion skin). We will be providing several solutions including fixture plates, and the ability to use a sacrificial layer under the part.
@IsaBillions
8 ай бұрын
Can't wait ! @@AirWeights
@acerjuglans383
8 ай бұрын
@@AirWeightsI'm interested to see how you use a sacrificial board, as I already know the small vacuum pumps only have so much power.
Instead of using two long pieces of grid gasket and then cutting two short pieces to fit between them you can place them in a pinwheel arrangement and never need to cut a short one.
@AirWeights
Ай бұрын
Great tip!
Can you leave the gaskets at those locations or do you have to reinstall after every use?
@AirWeights
3 ай бұрын
Absolutely, you can leave the gasket in place and quickly swap your part. You can even leave different gasket shapes on different locations of your table, and just open up the port you need, essentially leaving dedicated gaskets on the table for different sized parts. Any time you need to re-orient the gasket, it can be moved quickly and easily.
Does the gasket material compress when vacuum is pulled, so that the workpiece is pulled flush to the AirWeight's grid-table thing? Or will the gasket material cause a gap between the AirWeight and workpiece?
@AirWeights
4 ай бұрын
The material will compress, as the vacuum pulls the material flat to the Airweights table. This approach ensures you maintain a consistent Z height, with the table surface serving as the same consistent hard stop.
@OperationStackola247
4 ай бұрын
Exactly what I wanted to know- thanks.@@AirWeights
How long can you run a vacuum pump continuously ????
@AirWeights
26 күн бұрын
These vacuum pumps are rated for continuous use. We have tested them holding vacuum for periods over 24 hours non-stop with no issues.
@MaR6CiN
26 күн бұрын
@AirWeights thank you