The session was good and I learned so many new things like: 1. learned about the concept works behind execution and logging command. 2. learned about manual and automatic ways of execution of a command. 3. learned how to launch a website using webservers. 4. learned about the networking concept which are related and relevant to the docker. 5. learned about the internal load balancing and its uses and configuration on docker. 6. learned about bridge which is a software switch and also learned how to launch container in different networks. 7. learned about null drivers, routers and switches. and many more things... Your work is highly appreciated. Thank you for giving your precious time and making our country a nation of creators. RISE id : RISE 2020.83.8.1

Thank you very much Vimal sir for sharing us this valuable session: - Learned about few docker commands like log, exec, inspect. - How to create customized image using commit command. - Networking in docker. - What is IPAM and network drivers bridge & null. - How to create our own network and advantage of creating our own network. - How to do Load balance using round robin method in docker

In this session we gained knowledge about some core ideas of docker, creating own docker using bridging, learned about commands like nslookup, uses of null driver and also DNS as load balance.

Summary 1)In this session i learn about docker Also about the commands use in docker 2)Also about the load balancing process 3)about how to get details of container 4)about nulldriver bridge too. Thanks Sir...

in this lecture i learned - - network creation - docker deep concepts etc.

RISE 2020.51.8.1 things that i learned in this session were: 1.commands like logs,& -f,attach 2. interactive and non-interactive commands 3. personal network 4. about dhcp,switch,router 5.null driver and bridge driver 6.about load balancer

In this session i have learned about networking in docker

we learnt about how to see the details of a container after launching it. we saw ip address management and there the null driver and the bridge driver, learnt many commands like the nslookup command. we learnt how to set up a DNS command

today learnt about logs command, escape sequence launch the container networking LS and inspect command ipam,router,bridge etc LAN network etc

I have learnt the idea of docker,how we can create our own docker through bridging,some commands of docker like nslookup,use of null driver ,load balancing etc.

Basically this will be technically session 01 for the training. Here is a brief Summary: 1. What we have learnt so far. 2. Docker Commands Recap, Interactive vs Scripting 3. Docker Commands Related To Networks: network ls, IPAM,etc 4. Creating a Network with Docker. 5. Linking 2 Containers. 6. Using DNS Server as Load Balancer. pff! Very Intense and technical. I like it.

I have learnt about command like logs and execute, create own docker using bridge etc

i learnt about docker networking,how to check docker container logs from host os ,creating docker using bridge ,basics of php,(nslookup,exec,yum whoprovides ) are some of command that i learnt today. rise id-RISE 2020.60.2.2

We learnt various commands. For eg: -logs and execute We also learnt how to build own docker using bridge Core concepts of docker

Summary: - Naming syntax to upload the container image to the docker hub. - How to view the logs inside the docker container docker container log -f option for continuous logging inside the docker container. - How to run a command inside the docker container? Two way 1) Attach to the container 2) Use scripting to execute the commands inside the container. - docker container exec to overwrite the command running inside the container. - diff between exec & attach. when you use docker attach and type "exit" the container will exit when you use "docker container exec" when you exit from the container will be still running. Networking: - docker container will receive IP, MAC address, gateway, DNS, etc.. all the details from DHCP - IPAM maintains all the details about the network. - docker is having a virtual switch, which is a software-based. - Discussion about the various network drivers available for docker. - docker network create command. docker network create with different options available. docker network inspect command to inspect the Network. - To launch the docker container in different network. docker container run -itd --netwrok my_net1 --name my-web cetnos7 /bin/bash.

RISE 2020.75.3.6 In this session I have learnt about networking in Docker

In this session we have learnt about how to create your own network , got to know about dns in more details , setting up own dns server , bridge and null driver , load balancer and round robin algorithm , how to create network alias , connection and disconnection of container from the network & php using vi .

in today's lecture I'm learned about some core concepts of docker, commands like logs and execute, how to create own docker using bridge, using null driver, nslookup command, etc

Today i learnt about internal and other commands like logs, interactive and non interactive, nslookup. , Setting up own DNS webserver and balancing load, bridge and null driver, router and switches,execution of commands in container,how to create network.

2020.50.2.1 From the session I learnt about 1)null driver 2)ways to run a commond manual and automation 3)logs 4)app launch 5)how to check docker container logs from host and OS

Good to see networking in dockers

Yes, missed live sessions but learned from offline video.

In this session i have learned: *more docker concepts *networking in docker *internal and other commands like logs, nslookup, interactive and non interactive. *bridge and null driver *use of dns as load balance

In this session i learnt: docker logs, container name, docker exec, docker command, gateway switch, LAN, IPAM, SDN, link between two containers etc ID: RISE 2020.8.18.1

Checking docker logs, how can we run commands like manual | automatically, in networking ( router, bridge and DHCP) and how to connect between different n/w , IPAM , and search domain's IP addresses and sub domain (nslookup) and php script & commit to image

first of all i want to say that due to some network reasons i was unable to take this lecture on that day, and the summery of this lecture was:- docker logs command to access the docker container info. from base OS using -d command we can run container in background and concept of isolation of network which leads to security concept about IPAM commands like disconnect to disconnect container from network

@2020.41.7.1 From the session I learnt about 1)null driver 2)ways to run a commond manual and automation 3)logs 4)app launch 5)how to check docker container logs from host and OS

RISE 2020.26.20.5 In the third session of docker I learnt about scrpting language for automation of commands. How to check docker logs. About the docker Networks. We use the command to list all the Networks. Commands like : IPAM, SDN. We can create our own network using the command About network isolation,link between two containers. Concept of load balancing to divide the Network flow so that no conatiner is overloaded. How to configure the DNS server as load balancer. Thankyou so much Sir.

i learnt abt : CORE CONCEPTS OF DOCKER *commands - logs, execute *using bridge and creating ur own docker *creating system id (manual and automatic) *switch & router *webserver used for launching website using php *use of null driver *connect and disconnect containers from networks *using dns as load balancer

Rise id - 2020.15.13.1 This session got me introduced to - docker container logs to view inside a running container - creating our own LAN - about DHCP ,IPAM and DNS - Bridge and null drivers - how to change the network of a container - how google loadbalances his server - practically creating our own LAN and performed load balacing using alias

In this session we learned bout: * docker logs command- to show in root what is running inside the container. * We can run command in two ways: -- Manual -- Automation (program/script) * docker exec command- to run command inside the container (exec -it bash) * In Networking - docker network ls command - resolv.conf- file that contain the location of DNS server * Networking concepts- gateway, switch, router, LAN, netmask, etc. * IPAM (IP address management)- It is a database used by DHCP that stored information about the network. * SDN (software defined networking)- it is a switch or router which works on software instead of physical device. * Bridge software can work as a switch (layer 2) and as a router (layer 3) . * Creating own network (docker network create --driver bridge) * Launching the container inside the network created. * Concept of isolation for security purpose. * Network connection and disconnection * Load balancing by DNS (round robin) so that any server will not get overloaded. * Networking alias * nslookup command (client command for DNS to get the IP)

I learned Commands for connecting docker , setting dns server , router , switches , network creation , knowledge of container , commands like logs , execute , exec etc. , Docker networking etc

In this session, I've learnt: --Docker commands:"docker logs", "docker logs -f", "docker exec", "docker inspect", "docker network create with option --driver", "docker network connect" --DNS server, DHCP server --intro to IPAM --bridging in docker --how to disable internet connectivity with '--network none' option --meaning of Interactive and non Interactive commands --Load Balancer sends client to different servers --launching two containers with same name and network but with different images and IP's

RISE 2020.2.34.3 Session summary In this session we learned about lounchung docker container Details about container Creating network and network application creation Ns loooup command DNS commands Null driver and bridge driver Switch and router Hosting website with docker We have also learned about that why is it necessary to run non interactive commands to avoid any problem in automation. We also learn some new concepts about docker and container . Thanks sir

In today's session, I have learnt following things :- 1) how to check docker container logs from host ,how to create own docker using bridge. 2) create system both automatically nd manually. 4)we can create our own network 5) isloation helps in load balancing/, security. 6)how to connect nd disconnect to various networks from container. 7)use of network alias to do load balancing.

we learnt about commands related to work on docker like docker logs, nsloop command, got the use of null driver, learned how to create network etc. RISE ID - 2020.56.13.1

Today I learnt about creating new network, null driver, bridge driver, launching container in new network, php application creation and committing image, load balancing. RISE 2020.38.12.6

RISE 2020.20.1.1 In this session of docker I have learned many things like setting up own dns server, networking in docker, docker logs,concept of null driver,load balancing,

In this lecture we have learned about switch and router , null driver, logs, app launch etc

RISE 2020.16.28.2 I learned about.... 1. Core concepts of docker.. 2. About containers 3. Learned how to launch a website with a web server... 4. Learned about null drivers... Switches and routers.. 5 launching a container in a new network... 6. Creation our own system ID manually.. 7. Creating docker using bridge..

RISE 2020.41.7.1 RISE 2020.50.2.1 From the session I have learnt about 1)Commonds Logs execute 2)some other concepts of docker

Docker exec command without logging into docker how to get details form docker docker logs docker network concepts, all network details. commiting image maually and autmatically launch

In this sitting we learned about networking; what is the meaning of bridging, inspecting the logs; load balancing using dns alias; commands like nslookup etc

Today's RISE 2020.66.5.5 - Networking in docker - executive some perticular command in docker - checking logs from host machine. - some new concept about OS and why docker is fast.

RISE 2020.8.30.6 In this we have revised all the basic concepts studied in the previous lectures about the containers and the basic command used in docker, to start and create container. Then started about the networking by getting an example of LAN network connected through switch and router which . In docker learned about the common connector called bridge which is also behave as a driver and also learned about making our own network. And learned about null driver bridge.

In this session we learnt: *Launching docker container *Details about container *Network application creation *Null driver and bridge driver *nslookup command *DNS server setup

RISE 2020.9.37.5 l learnt in this session *Creation of network *About load balancing *Docker logs *Null driver & bridge driver *Launch container in new network *Creation of php application

in this session i have learnt that :- - how to run a command manually and automatic also - hosting website with docker - how to create a new network - how to check docker container logs from host - know about bridging in docker

TIL: way of checking docker container logs from host os, creating our own network,setting up our dns server,creating our docker image,some more networking concept,some commands to run in php, like ifconfig.

Session 3: More concepts of docker Networking in docker Cmds like log, execute,nslookup Switch n Routers Container launching Null n bridge drivers Load balancing Ty sir 👍 RISE 2020 57.3.3

In this session, we learned: ->how to exit without closing the container(running in the background while we can RH8) ->command to read its log, how to enter its terminal(bash) ->concept of local area network, switch, router ->bridge in docker ->container by default given to the network "bridge" by docker ->how to create our own network and launch a container in it ->concept of isolation ->linking of different containers in different networks ->use case of null driver

learned: - about docker logs command and docker execution command, also how its better than attach command. - about networking, drivers, DNS server, httpd , DHCP server. - about IPAM, SDN. - creating a personal network - load balancing - running webserver with many clients.

Hello sir, I learned about containers, how to launch container, how to see logs and check inside details of container, how to create system I'd, details about switch and router, creation of application

Rise 2020.44.1.1 Ip forwarding, bridge ,driver, null driver, running docker is in background, DNS alising etc

RISE 2020.7.37.2 In this session we learned about 1>More about Dockers concept 2>some Commands like logs and execute 3>how to Create own docker using bridge 4>how to Create system ID both manually and automatically 5>Webserver used to launch website using PHP 6>Null driver 7>How to connect and disconnect containers from networks

I learn that today session... --container detail ,creating network, launch container, null driver bridge driver, ---new command like logs and -f, Executing from container ---internal cmds of docker

1-Use of network alias 2- creating new network 3-logs 4- null driver 5- own docker using bridge Thanks 😊

what i learnt: -concepts of docker -logs and execute -nslookup, exec -creating network

null driver and bridge driver how to create application and commit command like nslookup , DNS as load balancer and many more inside details of container creating network how to launch container

We leaned about load balancing Creating docker bridge Create system id manually and automatically Use of nskookup And about then null driver Ping And running docker in background

Unique ID: RISE 2020.11.8.4 Summary of the session- I have learnt about the following topics- 1. Check the running condition of docker container logs from the host os. 2. Using docker exec command to run a particular command in a container on that time and exit it. 3. If the container is interactive and terminanted using docker exec command using bash command then it opened the terminal and we will use exit command in container then it will exit in background not stop permantly for checking using docker ps command for check the condition. 4. Using -d command in docker run to run a container in a background. 5. Concept of IPAM,Router,Switch and DNS. 6. Bridge is the network when the router and switch concept are combined used in software. 7. Pinging the container into another container. 8. Questions and Answers. 9. We create a our own network name in a bridge networking concept. 10. About none driver. 11. About to connect and disconnect a network for a docker. 12. About load balancer. 13. Install and create a php program in a vi. 14. In new made phpweb:v1 image we curl a 2 container and a client container in a same network type then we ping a client we make a combination of previous 2 container IP's. 15. About nslookup and host command to determine the IP address of a website. 16. Concept of an site. 17. Again Questions and Answers.

Rise 2020.10.3.5 We learnt some concepts of docker, Logs and execute were discussed Switch /router, nslookup, launching website using php, creating system of both manually and automatically, docker using brigde, null driver, connect /disconnect containers from network, dns round robin and load balance,

Some important command manual and automation ,How to check docker -container logs from host..

In this session I am able to learn more about docker. How to create your own docker image using the bridging concept. I am also able to learn about nsloop and about the null driver

how to create your own network , that gives isolated container for security purpose , the interested thing create load balance using , many interesting concepts of networking (switches, Bridges, routers) , difference between exec and attach commands.

Today we learnt about How to create application, null driver, switch and router, our own docker using bridge, launch container, concept of load balancing and internal cmd etc.. ID - RISE 2020.3.6

in this session we learned about--> first we took recap of last week class then we see how to check details inside docker how to see the last container how we can lunch container networking in docker ip address management IPAM-> DHCP AND DNS how to create docker netwok SDN it is bridge and then how we can ping one container to another container and some more information about the docker etc.

i learned about: 1 null driver 2 how to launch container 3 create own docker using bridge 4 webserver load balancing 5 how to connect & disconnect container from network

We learn about -learnt to create our own network -setting up own dns server - got to know about dns in more details - knowledge about load balancer and round robin algorithm - got to know about bridge and null driver - learnt to create network alias - connection and disconnection of container from the network -php using vi

In this session learnt about container how to launch container and networking

docker commands load balancing how to create your own network nslookup command null driver

In today's session I learnt Null driver Logs Application launch Php application Network alias Network creation Switch and router

In this session, I have learnt that :- -> Recap of previous session. -> Creating own image using commite. -> To execute manual and automation command. -> How to see log of docker? -> About switches and router. -> About launching container, load balance, null driver, bridge driver. -> Use of nslookup command. -> Details about netmask, DNS, DHCP - IPAM.

In this session we learned about core concept of docker, cmd like logs and execute , load balancing ,creating own image using commit command , how to launch container

RISE 2020.7.4.5 Creating our own network using bridge, networking in docker, DNS as a load balancer, and usage of cmds like logs exec.

in this session, I learned how to view what is happening inside the docker container form the base os using the command docker logs container name.I understood why docker attach command is not used and why docker exec command is used for not making the script hang up.I understood how to view the available networks using the command docker network ls.i understood what is a driver in the network and how the bridge acts as a switch and as a router.I understood how to create my own network using the command docker network create --driver bridge net1.I understood the concept of load balancing and how it diverts the client requests to multiple servers.I understood how to create an alias name for the servers like google and how client can connect to the server with the name itself.

In this session I learnt about : * detail about container * How to launch container * Create application * Docker networking

Internal and other commands like logs, nslookup, interactive and non-interactive -Setting up own DNS Webserver and balancing load -Executing commands in container -Creating Alias -Bridge and Null driver

Summary -> creating own docker using bridge -> creating new network -> launching container in new network -> check docker container logs from host os -> creating a php application & commenting a image

I had learn about: How to create our own docker using bridge, commands like logs and execute, route-n, creating a new network, docker give a default network taht can be changed, about the DNS using Round Robin algo, launching container in new network, create phone application and committing image , a d the connection and disconnection of different network from container

RISE 2020.34.5.5 In this session I learnt about: Checking docker container logs from host os Automatic and manual commands network creation Null driver and bridge driver connecting and disconnecting various networks from from container Seeing real time logs using -f switch etc.

recall last session docker log and executeNull drivers NSlookup command

RISE2020.18.6.3 Revision of the docker basics like docker host ,docker engine ,Container can be launch docker image Learned about cmds like logs,execute,DNS etc Learned about docker networking i.e. Creation of own network Connecting and disconnecting from various networks Learned about null and bridge driver Something about load balancing like dns server can be use as a load balancer by round robin algorithm

my name is minshu kumar in this session, >we learnt about more about the concept of docker >we learnt about how to check result of container in background >leant about how to see log >we learnt about many other command >dns,dhcp server

way to run command manually and automatic creation of network and networking in docker core concept of docker null driver and bridge driver how to use load balancing launch container in new network creation of an php application

How to check inside details in pc Creating n/w How to launch container Null driver Bridge driver CMD to connect docker

how can see last output of particular container running in background how to see logs exec option to run a command and exit the docker Network inspection IP Address Management Bridge in network Driver in-network and usages launching a container in our own network how to launch a website using webservers. case of null driver how to run docker os in background What is IPAM? what it does. How to ping from one container to another container?

1- Concept of some new commands of docker. 2- How to check docker container logs from host. 3- Creating systems automatically/Manually. 4- About DHCP, lPAM, DNS. 5- Null driver and bridge driver.

In tis video tell us about :- IPAM that tell or assign us about ip or network and manage by DHCP Also use bash in other docker Bridge or mynetwork is a default or own network that create by own we isolate different networks round robin algorithm is used toload balance -pq cmd that come out from docker or bash file -d cmd is used to run docker in background

Id: RISE 2020 18.6.5 - revison of previous sessions - how to watch live process from otger terminal - what is automation and manual run for command - what is network name and gateway router - docker network ls command - ipam - pinging one container to other - docker network create - what is multi tenant

In this session i learned.... ***Basics of docker.. ***some basic Commands Load balancing Concepg of Null drive bridge About Container detail. nslookup command Switch & router

can I access the drive now?

Came 2 knw abt the way to create a new network and the way to launch a container in the new network....creation of a php application....use of null and bridge driver...the way to connect and disconnect with various netwrks...w ways to run a cmd, i.e. manual and automation...how to check container logs from the host os

We learnt about Logs ,bridge,dns,dhcp Using a software as a bridge Switch,router Net1 bridge Web server using php Nslookup cmd Null driver Connecting and disconnecting containers

RISE 2020.9.22.1 Today I learned about: *checking of docker container logs *creation of own docker *how to create docker network *load balancer *bridge and null driver *configuration of DNS server as load balancer

Docker concepts, more about docker,internal and other commands like logs.

RISE2020_1.22.2 We learnt about Null driver,switches,toutar and descision about previous lecture

in this session we learned about How to see last output of the particular container running in the background, see logs ,l time logs , use the exec option to run a command and exit the docker , Different types of Network - Bridge, None and Host ,About IPAM ( IP Address Management ) , launch a container in our own network ,to disconnect from the network

Details and launching of container creating network nulla and bridge driver cmd nslookup, D

In this session, we learned about networking in docker We learned to launched docker container in new network learned about dhcp protocols also we learned some more commands