so simple and easy..... saved me a ton of money.... thanks!

@WorkingWithWimberley

4 жыл бұрын

You're welcome! This fix cost me about $13. I can only imagine how much this would've been at the dealership. I'm glad this video is helping others with this repair!

This was EXTREMELY helpful!!! Thank you for not rambling on about things that don’t matter. Keep posting!!! I’m learning cool stuff from you.

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I try to make sure all of my videos are straight to the point. I also try to release a new video every Friday so make sure to subscribe! 👍🏽👌🏽

I learned something new! I am spoiled with my fancy scan tools and always relied on them for codes and data. I never knew that you could test the sensors by sound. Keep up the good work!

@WorkingWithWimberley

4 жыл бұрын

Thanks Scott! I genuinely did this for my truck. I figured I’d record it to see if it could help someone else. 👍🏽

I could not hear anything with my cell phone so I used a stethoscope I got from Harbor Freight and it worked great. All information from Wimberley was great

@WorkingWithWimberley

2 жыл бұрын

Thanks a lot! Much appreciated!

Thank you! You just saved me $445 dollars that the dealership was going to charge.

@WorkingWithWimberley

2 жыл бұрын

That’s awesome! I’m glad the video helped!

Replaced damaged #1 and #4 sensor, Park Assist System was still down, Found your video, Straight to the point, Phone Trick worked FANTASTIC!!! My Ava is Happy!!! Thanks Bro

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Thanks, this helped me fix my 2013 Yukon sensor issue fast. Loved the phone trick! Thought I had to try swopping each one until I saw your video.

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Man my brother found you on KZread and sent the tail light episode to me. Then I saw the dash replaced and now the sensor replacement. I immediately went to my truck with my cell to identify the bad sensor!! Much appreciated!!! Can't wait to get this fixed!!

@WorkingWithWimberley

4 жыл бұрын

That’s awesome! I’m glad I was able to help with more than one video!

@LADE7

4 жыл бұрын

So it looks different on the SUV version vs the EXT because I tried replacing mine and I can’t even get to the sensors.

@WorkingWithWimberley

4 жыл бұрын

That’s correct. You can use the phone method to find the bad sensor, but the replacement that I did is specifically for Escalade EXT and Chevy Avalanche.

I just bought an 2011 same colors as yours. Awesome truck, my p/a went on today, thanks for the vid.

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

Thank you for the phone video tip. I couldn’t hear anything before.

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

Great job and easy to follow instructions. Thanks!

@WorkingWithWimberley

4 жыл бұрын

You’re welcome! I’m glad the video helped!

Thank you for this video. I have a 2011 Ext and this will be a lot of help.

@WorkingWithWimberley

3 жыл бұрын

That’s awesome! I’m glad the video helped!

Worked ! Thank You very much- phone idea was Brilliant!

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

Thanks for the vid my guy! I'm going to use this to try and fix my dad's Escalade.

@WorkingWithWimberley

Жыл бұрын

You’re welcome! I’m glad the video helped! I hope it works for you!

Hi, I had the same problem, I did like you and now everything works, Thanks

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

First...Very nice ride you got. Second...Great video, thanks for your help!

@WorkingWithWimberley

3 жыл бұрын

Thanks and you’re welcome! I’m glad the video helped!

Very helpful, clear video and much better than others Thanks!!

@WorkingWithWimberley

3 жыл бұрын

Thank you! I’m glad the video helped. This is actually one of my favorite videos 😂!

@jeffwhiteford1296

3 жыл бұрын

WorkingWithWimberley Just went and installed it, it works!!!

@WorkingWithWimberley

3 жыл бұрын

That’s awesome! Glad to hear it!!! 👍🏽👌🏽

Excellent video, Thanks for posting it !!!!

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped! 👍🏽

Very clever use of the phone. Thank you.

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

ShockHazard Very well done video, informative, great info, nice trick using the phone. Thanks for keeping it real and on point,

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Great video work under the bumper. Positioning the the camera couldn't have been easy. Excellent explanations as well.

@WorkingWithWimberley

Жыл бұрын

I appreciate the positive feedback! I’m glad the video helped!

Great Job and Excellent Video Thanks!

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Great video! Loved the comment at the end, my Brother!

@WorkingWithWimberley

6 ай бұрын

Thanks! I’m glad you found the video helpful! 🙏🏽

OG bro, really good videos

@WorkingWithWimberley

4 жыл бұрын

Thank you! I really appreciate that! I definitely try to put out quality content.

Thanks for the video helps a lot, I have the same truck, colour also.Mine is an 2008

@WorkingWithWimberley

4 жыл бұрын

You’re welcome! I was about to buy a 2008 but it sold before I could get to it. Thankfully I found a nice 2012 and was able to get it. These are awesome trucks!

Excellent Video. Thank you!

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

Bro im techy but you smart as hell.like um looking at myself

@WorkingWithWimberley

8 ай бұрын

Thank you! 😂

This is why KZread exists 🙂 I had no idea how to test censors. Thank you

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Thank U Brotha it was easy my truck is just like yours...👌🏿

@WorkingWithWimberley

3 жыл бұрын

Awesome! I’m glad the video helped! And you have a nice truck. 👌🏽

Thank you so much! very helpful, simple tutorial!

@WorkingWithWimberley

4 жыл бұрын

You're welcome! Anyone can do this job on their own car!

@David-zp8rx

4 жыл бұрын

I don’t realize it was so easy to diagnose/fix. I thought I had a shorted wire somewhere... ex police suburban, thought they cut the wire somewhere but 3 of the sensors are working so it’s just a bad sensor.

@WorkingWithWimberley

4 жыл бұрын

That’s great! Hopefully you can get the bad sensor out easily. In the Escalade EXT and Chevy Avalanche, the sensors are at the very bottom of the bumper so it’s easy to remove.

@David-zp8rx

4 жыл бұрын

Same with the suburban nice n easy! Thanks again!!! God bless

@WorkingWithWimberley

4 жыл бұрын

You’re welcome and God Bless you too!

man chevy wants $500 for that. you're doing the lords work 🙏🏾

@WorkingWithWimberley

9 ай бұрын

You’re welcome! I’m glad the video helped! 🙏🏽🙌🏽

Thank you!!! Great video!

@WorkingWithWimberley

4 жыл бұрын

You’re welcome! This one saved me a ton on money.

Very nicely done sir.

@WorkingWithWimberley

Жыл бұрын

Thanks! I’m glad the video helped!

Liked the video helped me a lot

@WorkingWithWimberley

Жыл бұрын

That’s awesome! I’m glad the video helped!!! 👍🏽👌🏽

Short and sweet!

@WorkingWithWimberley

3 жыл бұрын

Thanks!

Great video! Thank you!

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

Thanks for creating this video... my Insurance company was telling me I had a 500$ deductible....

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

Same problem with my Escalade, thank bro👍🏽

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

great video.. cant thank you enough.. good job.

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Thanks for teaching me.

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Man I been trying to figure out that light thank you

@WorkingWithWimberley

Жыл бұрын

You’re welcome! I’m glad the video helped!

Very good video 👍🏾

@WorkingWithWimberley

Жыл бұрын

Thanks! I’m glad the video helped!

Thanks for the info 😊

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Thank you great fix

@WorkingWithWimberley

4 жыл бұрын

You’re welcome! I’m glad the video helped!

Would have liked to see a wiring system check... but nice job thanks. Especially for the phone part.

Nice clean video.. massachusetts...

@WorkingWithWimberley

2 жыл бұрын

Thanks! I’m glad the video helped!

AWESOME!!👍

@WorkingWithWimberley

10 ай бұрын

Thanks!

Smart Video U deserve 10 & 5star

@WorkingWithWimberley

2 жыл бұрын

Thanks! I’m glad the video helped!

Thank you!

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Thx, nicely done

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Dope trick gonna try that for mines

@WorkingWithWimberley

Ай бұрын

I hope it works!

Nice, and well done. Would love to see video on replacing side sensing module on 2017 Escalade.

@WorkingWithWimberley

3 жыл бұрын

Those will be more challenging as you can’t just reach under and change it. I don’t have a late model Escalade in my possession, but maybe someone else will make that tutorial.

@kevincarbonneau7821

3 жыл бұрын

@@WorkingWithWimberley I went ahead and had the dealer replace it while they were performing a transmission TSB. They pulled my vehicle into the service bay and had the sensor pulled in less than 5 minutes, and showed it to me. I guess it's easy enough to get to. I should have watched.

@Zikolondon

2 жыл бұрын

Thanks for awesome video I have issue with 2018 Escalade I’m getting error B096C parking assist side sensor left front circuit and also front right When I clear with OBD and put in revers parking sensors work for 1sc and off again it will display service parking system even though I have swap the parking sensor but have same issue Any help or tip I would appreciate it

Thanks Wimberly

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

@heathguinn1547

3 жыл бұрын

I tried the steps you showed in this video. I get no signal from any of these. What else should I check?

@WorkingWithWimberley

3 жыл бұрын

@@heathguinn1547 if there’s no power to them at all, I’d check the fuses and the wires. Maybe the connection is broken.

@heathguinn1547

3 жыл бұрын

Thank you I will check fuses next. I appreciate your time.

Pretty damn good instructional!! For those who don't have the fancy scan tools!

@WorkingWithWimberley

2 жыл бұрын

Thanks! Much appreciated!

thank you very much 👍

@WorkingWithWimberley

9 ай бұрын

You’re welcome! I’m glad the video helped!

Thank You!!!!

@WorkingWithWimberley

10 ай бұрын

You’re welcome! I’m glad the video helped!

Good job

@WorkingWithWimberley

3 жыл бұрын

Thanks!

Thank you it help

@WorkingWithWimberley

2 жыл бұрын

You’re welcome! I’m glad the video helped!

Hi can you do a demo on a 2008 GMC Acadia SLT. Also if there’s no volume on the radio could that possibly affect the sensor

@WorkingWithWimberley

2 жыл бұрын

I don’t have access to an Acadia but the process I show can be used on any car. I don’t think the volume would have anything to do with it. There are some scan tools that could also identify what part of the system has failed.

God Bless You Too

@WorkingWithWimberley

2 жыл бұрын

Thank you! 🙏🏽

Hello Steven! Ended up subscribing as the few videos I’ve watched have been straightforward and simple! I was scepticisme about the phone trick - but it worked! No more cautions! However… I have no grid lines on my 07 ESV. How do I get those up like you have? OEM camera and radio screen. Thank you!

@WorkingWithWimberley

Жыл бұрын

Thanks for subscribing! I’m not sure how you would do that. I’m not even sure the 07s had the lines. My ESV was a 2012 model. I’d check cadillacforums.com

@TheEnglishChap

Жыл бұрын

@@WorkingWithWimberley Thank you for responding! I shall sign up with the forum - appreciate it!

Awesome...

@WorkingWithWimberley

Жыл бұрын

Thanks!

Thanks💪🏽👌🏽

@WorkingWithWimberley

3 жыл бұрын

You’re welcome! I’m glad the video helped!

I have that same bumper and looking to make the sensors work.. do you happen to know what harness, brain/computer I should buy?

@WorkingWithWimberley

2 жыл бұрын

No I don’t know. I usually use gmpartsdirect.com to find part numbers. If that fails, you could give your vin number to the dealership and they could give you the part numbers.

Brother you could really help me. I have the same EXT you do but the sensor trick did not work. Can you tell me where the URPA diagnostic connector is. All answers have said under the rear seat which is right for Tahoe and normal Escalade.

@WorkingWithWimberley

2 жыл бұрын

I’m sorry, but I don’t know where the URPA connector is.

Is the scenario isn’t working what noises are we loook for not to hear. Is it going to be a ❤️ beat for each that work?

@WorkingWithWimberley

2 жыл бұрын

You should hear a pulsing or popping sound just like you hear in the video if it’s working. If it doesn’t make any sound, that means it does not work.

Wow 💪🏽

@WorkingWithWimberley

Ай бұрын

Thanks!

First. Nice vid bro!

@WorkingWithWimberley

4 жыл бұрын

Thanks bro! This one took a little more work than usual, but I think this is a good video. This one has the potential to help a lot of people. Only time will tell.

Hi Steven, could you tell me how you were able to get the sensor matched to the body color?

@WorkingWithWimberley

3 жыл бұрын

I ordered mine from eBay and messaged the seller before buying it to make sure it was the right color.

@heathguinn1547

3 жыл бұрын

@@WorkingWithWimberley thank you very much for your time. I really appreciate you replying. I haven’t found anything on eBay yet. I believe Napa auto can match paint.

@WorkingWithWimberley

3 жыл бұрын

@@heathguinn1547 Ok cool. No problem!

Followed steps and replaced all 4 sensors, service park assist is still showing. Any ideas?

@WorkingWithWimberley

4 жыл бұрын

When you tested the sensors, were all four of them dead?

Does this work with a "park assist blocked code"? Yes, I've wiped em off.

@WorkingWithWimberley

Жыл бұрын

It should if you’re able to identify which one is malfunctioning. It sounds like there’s one that’s actually broken, not blocked.

I’m going to give it a try with the cell phone. My fuse is good and I cannot hear anything with my ear. I will try the phone test. Is there a module somewhere that can go wrong too?

@hungry1011

4 жыл бұрын

Ok, got to admit that I’m impressed with the trick. Turns out that the best way to assess the functionality of each probe is by video with the phone. I couldn’t hear it by ear or feel it with my finger but I could video the probes and listen to the video. My first probe is in fact not working and 2-4 are clicking. Thanks for the tip.

@WorkingWithWimberley

4 жыл бұрын

Awesome! I’m glad the video helped! The phone method definitely works well.

Can you tell me why the display wouldn’t change to the camera when going to reverse? I have 6 volts to the camera and at the module under the passenger seat but my radio display doesn’t switch.

@WorkingWithWimberley

Жыл бұрын

I’ve never dealt with that on a factory radio. But on aftermarket, it’s because the reverse trigger wire is disconnected or malfunctioning. Could be the same for a factory radio I suppose.

@bikefab

Жыл бұрын

@@WorkingWithWimberley thanks. I was able to get it, I have a Soundstream stereo/dvd player that has front and rear camera inputs. The only way I could get the camera to show on the screen was to hook both together and then it would work but the radio wouldn’t. So I just ran a switch to one side and when I go to reverse the display will go blue until flip the switch but at least I can see back there again now 😀

@WorkingWithWimberley

Жыл бұрын

@@bikefab Ok cool! I’m glad you found a solution.

Why on your Touchscreen appears the green, yellow and red lines on “reverse gear” and thanks for the video

@WorkingWithWimberley

3 жыл бұрын

You’re welcome. That’s the way it came from the factory.

@reginaldwhite9131

3 жыл бұрын

@@WorkingWithWimberley is the lines on your touchscreen standard I don't have the lines

@WorkingWithWimberley

3 жыл бұрын

@@reginaldwhite9131 Yes. My Escalade is a 2012 and everything about the GPS, radio and reverse camera is standard. I didn’t change anything. It’s how it was when I bought the truck.

I don't have anything at any of my sensors what should I check next

@WorkingWithWimberley

2 жыл бұрын

The fuses.

Can you do a walk around video on your Cadillac

@WorkingWithWimberley

4 жыл бұрын

Sure. I plan on doing a full video review of my Escalade EXT!

He man, what brand sensors did you buy when you changed it

@WorkingWithWimberley

3 жыл бұрын

GM from eBay and it was already painted. www.ebay.com/itm/Genuine-OEM-GM-25961316-Park-Assist-Object-Sensor-White15239247-/123297806935?_trksid=p2349624.m46890.l49286

How’s you figure out the pulsing trick?

@WorkingWithWimberley

2 жыл бұрын

I found it online and tried it. After it worked, I recorded the process to show other people.

Did you paint the new sensor? I have the same color Escalade

@WorkingWithWimberley

Жыл бұрын

I actually found a color matched sensor on eBay.

@dennisanca2214

Жыл бұрын

@@WorkingWithWimberley okay, I’m pretty sure all my sensors are broken on my 08 Escalade

@WorkingWithWimberley

Жыл бұрын

@@dennisanca2214 Ok cool. It’s easy to replace on the EXT. It’s a little more challenging on the regular Escalades due to the bumper design.

Im a kind i love Cadillac

@WorkingWithWimberley

3 жыл бұрын

Me too!

Can you do a pop test driving a 2007 Cadillac Caddo I guess going

@WorkingWithWimberley

4 жыл бұрын

I don’t understand what you’re asking.

@danielb-c9100

4 жыл бұрын

Test drive on your Cadillac

Was this a OEM sensor or a cheaper one from eBay?

@WorkingWithWimberley

4 жыл бұрын

It was both. It was OEM from eBay.

Hello have a question what if none of them are working any suggestions

@WorkingWithWimberley

9 ай бұрын

I’d check the fuses. I’d also check for damage on the wiring harness that the sensors are connected to.

@Tel0819

9 ай бұрын

@@WorkingWithWimberley Thank You

@WorkingWithWimberley

9 ай бұрын

@@Tel0819 No problem!

@Tel0819

9 ай бұрын

@@WorkingWithWimberley I'm trying to look it up do you know where I should be looking for the harness

@WorkingWithWimberley

9 ай бұрын

@@Tel0819 I was referring to the harness in the bumper. The one that the sensors are actually plugged into.

how did you get the new sensor painted ?

@WorkingWithWimberley

2 жыл бұрын

I ordered mine already painted from eBay and messaged the seller before buying it to make sure it was the right color.

@Optimization_Coach

2 жыл бұрын

@@WorkingWithWimberley would you happen to know his Ebay ID? Having a hard time finding the white like yours! Same truck! Thanks for the video!

@WorkingWithWimberley

2 жыл бұрын

@@Optimization_Coach You’re welcome! It was a few years ago, but here’s the link. www.ebay.com/itm/123297806935?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=pAGLOeLVSz2&sssrc=2349624&ssuid=DKqXTHUFQXa&var=&widget_ver=artemis&media=COPY

Where can I get new wiring

@WorkingWithWimberley

3 жыл бұрын

I would check online or at a Chevy/Cadillac dealership.

Is there a parking sensor on the front or just for the back?

@WorkingWithWimberley

4 жыл бұрын

The Escalade only had rear sensors up until the 2014 model year. Once the next generation (2015) came out, they added front as well.

@limitlessboy6423

4 жыл бұрын

WorkingWithWimberley good to know. Thanks!

@WorkingWithWimberley

4 жыл бұрын

No problem!

Does that work on all GM cars

@WorkingWithWimberley

Жыл бұрын

I’m not sure if it’s all GM cars, but it should work on similar styled sensors.

Yooooooooo

@WorkingWithWimberley

4 жыл бұрын

👍🏽👍🏽👍🏽

Hey man nice video, do you mind dropping me your email as I have an issue in my Cadillac Escalade and I am scared they might be ripping me off and I would appreciate your advice

@WorkingWithWimberley

3 жыл бұрын

It’s WorkingWithWimberley @ gmail