WOW bought one of these devices for 25 dollars on ebay. Now all I need is 200 dollars worth of leads as thick as my wrist and a power supply bigger than my house LOL. Now i know why those guys on ebay didn't show it working or what was actually needed to run it. I worked as a lab technician a ways back and we had a spot welder as big as the power supply but it worked a lot better but it wold never work for spot welding batteries, because it only welded with two fat fat prongs top and bottom. But need must and I suppose a car battery and a set of jumper leads will work just the same. Thank you very much for the video, i never would have worked out how to use the gadget without you I am eternally grateful for all you efforts in showing us how to set up this device really I am eternally in your debt. THANK YOU THANK YOU THANK YOU so much

@Laamlee-yt

2 ай бұрын

Sorry, It's just a pen only 7$ in my country. Not a spot welder, hahahhaaa.....

@dj_menyo839

Ай бұрын

you can buy a rechargeable one now. it comes with a usb cable, and goes for about the same price. No need for a power supply with transformer/power supply. Or you can make your own welder with an old MOT out of a microwave and id say 20-30 bucks worth of parts.

clickbait warning, you need a $$$ spot welder supply with its timer, this is only the hand probe

Precise and enthusiastic. Love your work.

good idea to use the nickel strip to fit the cable into the screwable welding connectors :-) Greetings from Germany

@ericklein5097

Жыл бұрын

Say what????

This handle is probably still the best value for money IMO

Thanks a lot

I am going to buy one of these on Ebay

please show where on amazon or other can get lug ends (circular) that you use on cable ends for plug into welder. Thank you

You need the big black wires or else the power delivered to the contacts will be reduced. The small black wire is connected to the microswitch in the handle and this triggers the electronics in the big black box to deliver the timed power to the electrodes. You cannot use a car battery as there is no way to control the power to the electrodes. The electrodes will be connected to the battery directly so as soon as the electrodes connect to the nickel strip power completing the circuit the weld will occur without power control. The power control will be how long you keep the electrodes touching the nickel strip. Obviously this is unworkable as the welds will be horrible. You essentially need the complete setup for the spot welder to work properly.

@p.k.953

8 ай бұрын

Thank you🙏🫡

Thay biến so lớn hoặc mua thêm cực nữa mắc nối tiệp vào cho mạnh nhé !!!

What type of spot welder do you use to connect the welder trigger to ?

thanks :)

Hello, great explanation! But what kaint of device is it that the replaced cables are connected to? Thaknks!

do u know what is the setting for spot welding battery? i fear if i set over power can make battery broken

Hello, what machine do you use to connect the spot welder?

@Rj-nh1df

Жыл бұрын

Yes the base will run you about $225 extra

if i but this my welding rod machine do i need some kind electrical timer for that small The small black wire connect Plug? like install my machine inside? or how its know when start and stop spot welding? Electrical circuit diagram? and what convert parts i need?

gdzie kupiłes te zlaczki wtyczki do tej zgrzewarki ktore masz w obudowie

I purchased one of these only to find out I need the "welder" as well, the seller refunded my money. He has now changed the wording on his listing. I still have it, what do you suggest that I but or make so that I can have a machine that will nickel strips for battery's

Hi I have one of these and can't seem to get it work. My questions are does it use 12V and at how much amps. Also what type/brand of power supply are you using

@m.ronaldo7405

2 жыл бұрын

The stock cable is only an small contactor (to replace foot pedal). It's only a pen. Not a weld machine *You need a spot weld machine to connect it

You could plug this into a inverter welder and put it on the lowest setting? My welder goes down to approximately 30 amps? Any reply appreciated 👍

Can someone tell me why there is a 4 to 12V operating range if there is no electronics on board and how the trigger works?

I've got myne coming on Wednesday

Can it be plugged into a direct 220 socket? And can work

where can you buy a bifrc spot welder power supply ?

this shows us its functionality. ALTHOUGH WHAT WILL WE NEED TO PLUG INTO THE ACTIVATION BUTON?

do the triger wires need a 12v supply or just a switch to trigger it?

@phonophile

3 жыл бұрын

You could see trigger mechanism on 1:15 .

What is the black box?

Hello. Where is negative and positive wire for connect?

Quantos amperes na inversora?

How is it working for you? Better than the fixed type pen like the one Sunkko makes? Worth the upgrade?

@Laamlee-yt

4 жыл бұрын

Sunkko is a professional welder for commercial use, so i think this diy handle can't beat sunkko. But it's enough for me. You can find how i built a battery pack using this handle in my channel.

@GiovanniEsposito5

4 жыл бұрын

@@Laamlee-yt The sunkko HB-70 welding pen is not that good: the wires are thin and it has no integrated switch, so you must use the pedal to trigger it. With this design you have much bigger copper conductors and you can spot weld with one hand only. I'll make one myself....

How many amps should the power supply used to use this pen? I don't have a tailstock machine like you use I have a small one name DIY mini spot welder

@m.ronaldo7405

2 жыл бұрын

Any PCB welder can bê used 👍

@m.ronaldo7405

2 жыл бұрын

The stock cable is only an small contactor (to replace foot pedal). It's only a pen. Not a weld machine *You need a spot weld machine to connect it

Nice video! What voltage and curret did you set your power supply at? Thank you! 😀👍

@Laamlee-yt

4 жыл бұрын

Sorry i don't know what you mean. There are two adjustment knob for current and timing. Current about 90A, timing at 15~20 knob level

@Neilukuk

Жыл бұрын

@@Laamlee-yt Can it kill you if you touch it?

@yousufnofal9223

9 ай бұрын

@@Neilukuk As long as the voltage is not high, no matter what the current rating is.

@Neilukuk

9 ай бұрын

@@yousufnofal9223 Thanks

Tetikleme kablosundan kac volt elektrik geciyor

Muito legal, uma pergunta esse cabinho fino é ligado ao que? Alguma fonte separada? Se for de quantos volts?

@rioj6498

Ай бұрын

12 Volt 100A (Minimum)

Hello Can me use with charger 12 v 3 amper

Hello! Sorry, i dont get what this black wire with jack is for, could you tell me?? Can i use this pen with another adjustable welding station (with not connecting that jack anyway)?? What is that jack for??

@shofiulalamshahin3820

9 ай бұрын

Thanks for this question. I have a same question but the author couldn't answer this ! What for the black wire with jack ???

Can u Pls Share the Machine and pen Buying link .And Description link is expired .Pls Share ASAP

Quando comprei minha máquina de solda não veio o resto das peças

What is its working voltage?

Is connecting those big wires mandatory? Can't we use small connector they provided?

@p.k.953

8 ай бұрын

For 90A YES!

Hi, can you provide a link where to buy and what price is? What power supply you use?

@jaredstone9487

3 жыл бұрын

Wish app

@ericklein5097

Жыл бұрын

All over aliexpress "spot welder pen" Looks like a custom made spot welder but I could be wrong

what mechine to support this spot weld pen？normal welding mechine？

@dj_menyo839

Ай бұрын

its an actual spot welder. a standard arc welder does not have a transformer with the correct turns ratio for resistance spot welding.

How much volt its work ??

What type of model is the black box? I only have the device that you hold in your hand when you score. thank you 🤗

@elektrocix

6 ай бұрын

Cx4500 spot weller

How do you connect this to a 12V battery and what is the purpose of the round connector?

@m.ronaldo7405

2 жыл бұрын

The stock cable is only an small contactor (to replace foot pedal). It's only a pen. Not a weld machine *You need a spot weld machine to connect it

What supply did you use? Voltage/Current?

@el3men2alvarado.

3 жыл бұрын

Alvin Pajuyo good question

@elducestrats1320

3 жыл бұрын

im also looking for this answer

Can you connect it to a regular welder for rig welding?

@m.ronaldo7405

2 жыл бұрын

For sure 👍

12V AKUMULATOR Do you press this device

can i use the 12 v car 70ah battery as a power source for this spot welding pen? pen itself switches off the power after the application, right?

@p.k.953

8 ай бұрын

No

sir i want to buy a shop where

Wen u touch nichrom strip n weld, dont u get shock

Hi, can you please do a favor can you provide all the dimensions of this product like diameter and of the springs, thickness and width of the copper plates, and the dimension of the blue box. i want to make this as this product is not available in my country and the cost of importing this is very high as high as thrice the price of product so can you please give me the dimensions.

Please what is the size of the wire for spot welding pen?

@ericklein5097

Жыл бұрын

6AWG to 4AWG or 16mm2 to 25mm2 is usually recommended. Get silicone insulated wire if possible for the most flexibility but welding cable with EPDM is also fairly flexible. Depending on the type of spot welder you are using having too large of cables can be a bad thing.

If i use the normal cable plug 12v that came stock from it , it still can weld right ?

@m.ronaldo7405

2 жыл бұрын

The stock cable is only an small contactor (to replace foot pedal). It's only a pen. Not a weld machine

Is it available in India? Through which portal and it's price?

@onfire4770

Жыл бұрын

I bought from Quartz Components App it was like approx rs 1600

Hi! I’m new to this...... What kind of trafo do I need to connect the spotwelder to? I can’t find one with the connector for the switch?

@Laamlee-yt

4 жыл бұрын

I don't understand what you mean, have you watched the video?

@xlsoundreinforcement

4 жыл бұрын

bitDaD Yes, I watched the video. I think I mean the welding installation or powersource

reduce the pulse time - you're burning cells !!

@summerWTFE

4 жыл бұрын

can you clarify what you mean by that?

@JawadAhmadsahibzada

4 жыл бұрын

phero when welding time is high, it leaves burn marks, destroy the tips and heat up the cells. Current should be the highest and time should be minimum

@summerWTFE

4 жыл бұрын

Jawad Ahmad thanks. That’s good to know. I’m about to try this out myself and am trying to find as much info as possible before starting.

a jaka dałes grubosc przewodu 25mm2 czy 35mm2?

Is it used to spot weld Aluminum,?

@bobsmith3983

10 ай бұрын

Won't work as aluminum resistance is quite low. Aluminum spot welding requires very high current.

Sáng tạo làm máy hàn

Úsala con algo de aluminio

Whr do find tht gold connecting pins??

@ScarryMarian2012

3 жыл бұрын

Those are brass welding cable plugs

@ScarryMarian2012

3 жыл бұрын

You can find them at any store that sell ground clamps,electrode holders and welding cables specifically !

Where can i buy for the welder machine itself? I already purchase the pen, but what about the gadget itself where i can plugged the pen?

@Laamlee-yt

4 жыл бұрын

Dude, You need a spot welder. It's just a welding pen

@jaredstone9487

3 жыл бұрын

Wish app

Dòng qâ yếu cháy hết cả kẽm

what would happen if those 2 ends touched ?

@sed6

4 жыл бұрын

Nothing

wtf is that sandpaper fan? lol

சார் இந்த மிஷன் எவ்வளவு சார்

Im gonna use an mig welding machine and run it at 12 volt lol

i got one of these,total junk mlelted after 10 welds!

@RFTECH1

3 жыл бұрын

Friend , you do not know How to use / apply .. You have use too much High Current energy ! You cannot Connect straight to Transformer or Car Battery ! You got to have the Box in the Video ! Its quite Simple just a Transformer with 50-100 Amps but must have Current Regulator using FETS Transistors and Control Timer to varies the welding Time as needed ! Thats all ! Can build one by yourself but requires knowlede in Electronics !

Cool so i got scammed on amazon again

Oq preciso ter de admissional

... salud

gì mà đen thui vậy

@paul.alarner6410

3 жыл бұрын

bollox its just made from crap,platic it was used connected to a battery spot welder.

Moi han chay đen moi tap choi may han cellpin a

sorry to say but i think your video is not telling truth as on the first weld there was 3 or 4 welds you only done 1 so why is that ? Then the welds on batteries you did not show how strong the welds are why is that ? to me it seems your hiding something but good video thanks.

Lk

yeap I was scammed by this too.

too long impulse!!!

mohamed kassem

...you score it badly, low power, long time. Points should be clean, not tanned;)

Disgusting

junk. do not buy

Why did you want to change the welding pen? is this better than the previous one? im thinking which one of the 2 to buy, the previous one comes with a cable and the connectors as well