Sounds like a lot of fun. I shoot local benchrest comps on occasion with 6ARC poverty pony gasser just for fun. I like loading my own ammo. I use holds from 100-1000yds no dialing (except maybe a tad for wind) it is zeroed at 600.

Great recap and review of the rifle. I’m thinking of getting into PRS as well and the SP10 is my #1 consideration for purchase.

@The4GunGuy

5 ай бұрын

Hi Jordan! You'll love it. I'll recommend getting the upgrades that I did like the easy to tune gas block...It was so easy to adjust during that match. Hope you enjoy yours if you get one, and thanks for watching my friend!

Thanks for sharing. Newby to long range shooting, and looking to purchase my 1st PRS gun. Great infor.

@The4GunGuy

8 күн бұрын

Hi NSA! Glad you liked it. I just shot this rifle in a PRS match today, a generally difficult match at another range, where targets are usually 1 MOA. I impacted 1 MOA 800 and 900 yd targets (so about the size of a dinner plate). I missed the 1,000 yd due to bad wind call, but overall, this rifle was great! NO jams, or anything. Thanks for watching my friend!

Thanks

Good info as always. Glad you got things figured out. I think i'm gonna shoot the 6arc this weekend here at the Riflesonly Brawl. We'll see.

@The4GunGuy

6 ай бұрын

Let me know how it shoots for you GMG and thanks for watching another one my friend!

Great video! Always enjoy you sharing your experience.

@The4GunGuy

5 ай бұрын

Thanks Fattigla! This is a very humbling sport for sure...Just when you think you have everything tuned and running great, wham! Thanks for watching my friend!

I got the MPA dn5 on t tikka t3 and man that muzzle kicks like a wild horse. Plan on trying the area 419 sidewinder

@The4GunGuy

Ай бұрын

Hi Project! I ditched the DN5 because it wouldn't stay on the rifle. I should have stuck with the Area 419 Hellfire Match, which I love now on both this rifle and my BRA. Thanks for watching my friend!

Too few videos out there, explaining how a gun worked out during an event. Greatly appreciate this report

@tonypipTexas

5 ай бұрын

Thank you Dimitri and thanks for watching my friend!

I've built a few 6GT LR308's they are just a perfect combo for semi auto PRS. Would you entertain having a 25GT custom build made?

@The4GunGuy

6 ай бұрын

Hi EagleEye! I'd love to look at a 6GT, but honestly, when I look at the cost of purchasing the reloading supplies (dies, etc...) I don't want to spend the money to only shoot it occasionally. Thanks very much for asking though, and thanks for watching another one my friend!

@EagleEyeShooting

5 ай бұрын

@The4GunGuy but you bought a seekins lol. I understand, however, 6.5CM in that platform is not a good option. COAL cannot be optimized and keep mag length.

@The4GunGuy

5 ай бұрын

@@EagleEyeShooting I agree, but I had all the 6.5 CM dies, etc...So it was a cheaper option to even see if I'd like a gas gun for prs. I was actually surprised at the minimal recoil and the accuracy at the match, and most importantly, I had a blast with it. I gotten in shooting like I got in golf, just enjoying myself, knowing I'll never be a scratch golfer.

Great video. Congratulations on the win. Thoughts on a AR15 chambered in 223 shooting in gas and tac division in prs?

@The4GunGuy

5 ай бұрын

Hi CJ! Some guys are shooting .223, but in bolt gun due to better handling and higher velocity...They are very accurate. But one thing to note is be ready to not have impacts called due to less force on impact out at distance. In some matches, I've seen spotters not call impacts simply because that 1.5" thick plate at 1,000 yds didn't even budge, and there was no impact "smoke". If you're going to run a gas gun, I'd stick with the 6.5 CM or a 6mm family like 6mm CM, GT, Dasher, etc... Thanks for watching another one my friend!

@cjjohnson7450

5 ай бұрын

@@The4GunGuy great point. Thank you so much sir.

I’m going guess by the picrail on side of the SP10 you are running the Tactical Brass Recovery System. If your are that is the best on the market and the same that I run on my GAP10. The GAP10 and the Seekins are the same gun since GA uses the Seekins frame and use a Bartlein Barrel. Look forward to your next video.

@The4GunGuy

5 ай бұрын

Hi Malcolm! Yep, it's a TBR. Tried another brand, but my buddy Richard told me about TBR and I love it. Now if I can just get ME to work properly, it'll all be good. Thanks for watching my friend!

What is the white tape on your elevation turret?

Did you consider the 6mm ARC? Curious as the Seekins DMR 6mm arc is well under 2K.

@tonypipTexas

5 ай бұрын

Hi TrueLine! I considered all the other options, but the reality was, I love the 6.5 CM cartridge and I already had all the dies and a ton of bullets, so it made sense for me. I've heard good things about the ARC round though. Thanks for watching my friend!

What grain projectile do you use in your 6.5 creedmoor?

@The4GunGuy

Ай бұрын

140 or 147 Hornady ELDM's.

just out of curiosity, because im considering building a 6.5 AR-10, what bullet have you seen good luck with? I was considering the berger 130 OTM but curious about longer bullets but I know COAL is a factor

@The4GunGuy

5 ай бұрын

Hi ForceRecon! I've run the Hornady 140 gr or 147 gr ELDM's in both bolt and gas guns with great results for me.

@ForceRecon112

5 ай бұрын

Good to know! I saw places selling the berger 140 hybrid ammo and considered that too. Your sp10 is the 22” correct?

What is it about matches that makes guns want to not work?

@The4GunGuy

6 ай бұрын

IKR! The thing ran flawlessly until that buzzer went off...But, we adapt and carry on! Thanks for watching Takashi and wish we could shoot together again!

6.5 Creedmoor or .308?

@The4GunGuy

4 ай бұрын

6.5 Creedmoor

What trigger do you have

@The4GunGuy

Ай бұрын

Hi Matt! I went with a TriggerTech 2-stage Diamond, the link is below...I get nothing for promoting it, so shop where you'd like. I just like their AR triggers. I use Bix n' Andy 2-Stages in my bolt guns. Thanks for watching my friend!: www.eurooptic.com//TriggerTech-AR10-Two-Stage-Blk-Red-AR-Diamond-Pro-15-40-lbs-Trigger-ART-TRB-14-N.aspx?

@mattofjax

Ай бұрын

@@The4GunGuy​​⁠ I appreciate you getting back with me. I don’t understand how it is. I’m a bit of a trigger ❤ myself, I have a lot of geissle triggers and they are great, but I’ve been wanting to explore other options

@The4GunGuy

Ай бұрын

@@mattofjax Love my Geissle's in my AR's, but like you said, I just wanted to see how the TriggerTech would work and wanted a drop in trigger. I had great luck with TT until one day at the range practicing it went out on me, so I switched to BnA on my bolt guns. I like the BnA's because I can take them apart and clean them.