The 3d Printer I used for this: bit.ly/Warped-Formlabs

You can see knocking occurring in cylinders 1 and 4 after applying oxygen fuel. The fuel ignites when the piston is on its way to the compression stage. This creates two opposing forces: the piston attempting to move upward and pre-ignition or knock trying to push the piston downward. Consequently, the crankshaft fails to tolerate these reverse forces.

@faisalalsharaf5823

28 күн бұрын

You're right, I can see it clearly at 0.25x 7:37 7:39

@WarpedPerception

28 күн бұрын

good eye... I didn't see that until I was editing at the end then I saw it. thats what broke the crankshaft no doubt.

@rustirab3465

28 күн бұрын

You can also see the valves floating and bouncing, not letting the engine rev any higher.

@joedon9758

28 күн бұрын

@@WarpedPerception thats a real robbery not a bank heist, fvckin chineses offer this low quality piece of shit for 800 bugs. next time you should just drink a fine old schotch for this money

@GlutenEruption

28 күн бұрын

Crazy - near the end cylinder 1 is firing practically at BDC at the end of the intake stroke/start of the compression stroke. Can't really get much worse. If it was using spark plugs instead of glow plugs, it probably would run a lot better/longer under these conditions

OK, that was epic cool. Boring??? Not a chance. That's an epic ending.

@performanceartist434

23 күн бұрын

Гараж 54)

Matt never fails to impress on his content and creations. Always a fun ride when a Warped Perception video drops! You never know what’s gonna happen, but you know you’re gonna be amazed.

@WarpedPerception

28 күн бұрын

thanks, I appreciate that

Some KZread channels will make an episode on only creating the block, then another for building it, then another for running etc. I love your channel, you're not f*cking around and show us amazing stuff and I appreciate that about you. Also you craftsmanship is amazing! Thank you!

@WarpedPerception

28 күн бұрын

Thank you, That's inspirational. A lot of people actually ask me to do a separate video on each part and say I can make multiple videos out of one but I just can't do it. I mean on top of that if I did that I would never ever finish the list of videos I have, it took me like 3 years and the pandemic to get enough money to buy and set up all the equipment I needed to make things like this happen, and now I could can finally do them. Thanks again for the comment.

@itayby

28 күн бұрын

​@WarpedPerception equipment is nothing if you're not skilled, like you are, truly, as a pilot and an Aeronautical engineer I can't stress this enough, you have a skill that not a lot of people possess and you should be proud of it. Also I love your jet engine videos but I'm biased about jet engines haha

@WarpedPerception

28 күн бұрын

@@itayby very very true ... Well hey No wonder why you understand.. fellow engineer, I'm an aerospace engineer... You get it

@peejay1981

28 күн бұрын

@@WarpedPerception I'd love to see more of the process, but at least what you do show is good, not just some unwatchable timelapse.

@ILOVEBACONBOY2018

25 күн бұрын

Like tavarish

This thing is so cool, it's a shame it's expensive! Cool necklace btw

@WarpedPerception

28 күн бұрын

Yes and thank you ! My niece made me the necklace The emblem I made is the Formlabs Logo.

@tonydetwiler2624

28 күн бұрын

Expensive those things are cheap that is part of the reason why the crankshafts break in those things

@RainbowSheep_was_taken

28 күн бұрын

@@tonydetwiler2624 800 usd is not cheap

@RainbowSheep_was_taken

27 күн бұрын

@@tonydetwiler2624 800 usd isnt cheap bro idk where ur from

Me : Dang! I don't even know why am i binge watching these tiny engine videos? Also me : They are super cool dude!

I’m obsessed because rc has been my hobby the last 20+ yrs but I can’t get over the relatively high prices the mini running engines cost. I’d love to put one in my 1/6 scale scx6 or one of my 1/10th scalers.

these mini engines are cool to me because they represent the real thing but in a tiny package that is very manageable

Dude's smarter than some whole families!

You the man. Love your videos dude. Keep up the good work.

@WarpedPerception

28 күн бұрын

Thanks!

As always, that was amazing Matt!

@WarpedPerception

27 күн бұрын

Thanks I hope to have more soon, been gearing up to do stuff like this for 3 years, finally got all my stuff set up $$$.. You know what I mean.

Holy shit bro last time I watched one of your vids you had like 100k subs or something, you've exploded and well deserved!

Awesome, you made an amazing See Through 4 Cylinder Engine, looking forward to your more engine share

@WarpedPerception

27 күн бұрын

Thank you.

Way cool! Thanks for the insight, literally! 💯

@WarpedPerception

28 күн бұрын

Your welcome, I have a few more engine videos to go from my backlog then on to the fun stuff

You maybe bored by this, but I LOVE IT ❤❤😂😂 Keep goin' !!

The temperature that must have existed at the moment in which "stars were born" could have easily exceeded 3000°C. It is incredible that this resin was not pulverized at that temperature.

OK, that was very cool! I appreciate you spending the time and the money so we could check out that tiny four banger. Much appreciated.

You're crazy man! 😂 But it was beautiful! 😃👍

Its awesome being able to see what's going on with the see through engine and the super slow mo. I love the sound of this little engine. Sounds like a racecar

in case it helps you, i like watching these small scale engines because it feels more “absorbable”. like, i know exactly what’s going on because it’s small enough that i can cram a mental 3d model into my head and picture it easier. plus, when you look at the absolutely kitted out units, it helps you understand the bigger engines and how they operate more efficiently :)

That's BAD AZZ !!!!! Awesome video man, Thanks.

You never cease to push the limits Matt! That was great!

That last shot with the oxy mix was F* AWESOME!

Thanks for all of your effort - really enjoy the content :D

So cool, you're definitely one of the best builder/engineers on the tube bro love your content

OXY... what could possibly go wrong? lets find out.. I laughed so hard. cheers

Wow, that's awesome to see , i love it when you push the boundaries with these little engines. Great work 👏 👍 😀

gorgeous print result, stunning

Good to see you today. Your engineering skills are insane!

This is so satisfying to watch

Everything you do is just class!

Been away for a while but always brings a smile to my face ❤

Absolutely mental man, idk how this didn't get a few million views

Great video. Excellent block!

That's super cool ! Thank You!!!

Every video you do, amazes me man! The amount of time, money, and most impressively, expertise, that you put into your ideas and videos, is astounding!! Thanks for another great one!

Imagine making a see thru head for this engine too! It would be awesome

This is incredible!

Detonation station! Awesome. Thanks Matt.

Excellent job Sir

bro literally makes the best content fr

Bye far one of the coolest .Detailed videos ive watched! slow mo is awsome to see what goes on inside that little engine!!! build more and build em bigger!!!

@WarpedPerception

23 күн бұрын

Thanks!!

Great video I wanted to see this for 50 years

the greatest KZread channel

I am inspired by your videos and have been watching your channel for a long time. I even tried to do something similar in my auto repair shop. Thank you. Hello to you from Kiev, Ukraine. 👍👍👍

keep it going legend

Excellence stellar work!!!! Out of this world world class!!!!

You should make your own engines, you have very interesting ideas that many don't think of 👍🏻

@WarpedPerception

27 күн бұрын

Thanks! , I did a couple of my own a few years back but the prototypes were very expensive and people said they really wanted them and I put it on eBay for like 800 bucks It had like 150 watchers but nobody bought it ... Crazy... I might try again very soon though and do it a little bit differently and cheaper for sure.

Great video Matt :)

I love ICE's. Thankyou for doing this video 👍

impressive footage 🔥🔥🔥🔥

Superb ! Congratulations !

Daaaaaaaamn that was sick

That was awesome.

Dude awesome video! Reminds me of your see-thru jet engine!

that was pretty neat!

This guy works really hard for a video to show some amazing views

@WarpedPerception

28 күн бұрын

it was so much work !!!, I couldn't even imagine it was going to be that tough, and I really want to move on to my planned videos now but I cant leave these backlogged vids in the dust cause they kind of tie into what I have planned.

Great effort, thanks for the vid,

This morning on daily walk I seen a nice radial engine getting hauled somewhere. A large one. A see through radial engine would be neat. I like how this four cylinder reved up.

your channel is amazing

Goodluck 🎉

@WarpedPerception

28 күн бұрын

thanks

wow, cool to see the harmonics in slow motion

This is cool dude kudos.

Nice.. i always wanted to see this

These are awesome!

Dude that was f***ing awesome. Instant 👍👍 congratulations

Nice video brother waiting for your video man

You and JohnnyQ90 do some really cool stuff with these little engines.

Really appreciate the time/effort you put into making these videos for people's entertainment - Great job ! Whoop 🙌 whoop for WP ☺️

Looks like a new space?? Badass video though, hope to see that custom LED that needed the theram solution you made come into play still!! Always excited for your content dude.

@WarpedPerception

26 күн бұрын

Haha... Crazy that you remember that, yes I actually finished it and I fulfilled the contract. I'm going to be using it real soon.

@travis.napier

26 күн бұрын

@@WarpedPerception it's easily my favorite video you ever did. Next I want to know more about your clear metal!

That was sick! GOOD use of money! x) love it, and all your ideas! "stars born in cylinders" lol sickkk!

Love the content keep it coming...

That was cool as hell

Good job, Matty. Next we want to see April riding that hovercraft you have lined up for us in the back!

Super cool

That was cool! Better to experiment with these little engines than full sized ones.

I'd like to see more of the mini-Harley-Davidson engine. Am wondering if it would last long enough to fly a scale RC airplane of the HD powered plane at one of the HD museums. But that one has a gearbox between the engine and propeller shaft.

6:04 look at how much the flywheel is wobbling back and forth. It looks like the crankshaft is bending every time it fires

Once again some crazy stuff happens :D

Nice !👍

Very cool

BADASS

Super increible de ver la combustion interna !!

Классный двигатель и очень тонкая работа! Respect!

Beautiful😍

Classic!

Notification squad Have a Great weekend!🔥🔥🔥

If you watch at 0.25 speed at 7:42 and 7:53 you can actually see the flame traveling back up either the fuel or oxyacetyline line in the background. Pretty crazy.

@WarpedPerception

28 күн бұрын

I actually had an even slower clip but omitted it .

Hi, they have a lot of blow by, thats why it doesn't have oil in the crankcase, because all would go out thru the crank ventilation. I have the V8, the 2 cyl, the wankel 2 rotors, and the 4 cyl. Great video.

Short n sweet.

That’s 🔥

Too cool.

This was wild 😂

awesome!

@WarpedPerception

27 күн бұрын

Thanks... I'm glad you like it

"I dont know why people love these mini engines" "This is going to be so cool if i can make this work" Pretty sure you just amswered yourself..

Am I seeing a hovercraft in the background? I always look forward to your videos!

Damn dude! You got some SERIOUS money tied up into that awesome equipment! Talk about a man cave! Win the lotto recently?

Keep it up 👍👍💯

Make a V12! Oil in the bottom end was a great idea