Many thanks for your tutorial. By the way, private VLANS works for me in EVE-NG. I am using i86bi-linux-l2-adventerprisek9-15.2d.bin
@RobRikerTechChannel
4 жыл бұрын
Ok, I'm using IOSv-L2. I tried it out and it failed to work. I have physical switches for testing it out.
@nonameforyou58623 жыл бұрын
Is it possible to use your ASA as your default gateway for multiple subnets, and apply a vlan tag to each subnet, connect it to a trunk interface on the switch, then have the switch break out each of those vlan tags into "sub-vlans"? I can get this to work in my lab ONLY when using a directly IP'd interface to the router, without using trunk/802.1q - it's just a promiscuous mode switchport mapped to a primary vlan. Seems like an extreme limitation to me but maybe I'm doing something wrong. Also - if the answer is that you cannot do trunking to a "router-on-a-stick" like mentioned above, what would be the alternative? Would you have to put layer3 on the switch? Thanks!
@RobRikerTechChannel
3 жыл бұрын
Yeah, ASA can do sub interfaces. Use the "vlan 10" config model and not "encap dot1q 10" like a router. I don't think the switches I'm using in EVE support the separate VLAN options.
@gjbm17823 жыл бұрын
Do you know if there's a way to expand the pvlan config to a switch that doesn't support pvlan? Does works with both vlan and pvlan traffic?
@RobRikerTechChannel
3 жыл бұрын
Not sure honestly, never tried
@anonymoususer67862 ай бұрын
Seriously need to review/edit your videos ahead of time. Very sloppy and inconsistent, also you’re struggling to stay on point. Simple = better. Keep it simple and flowing consistent.
Пікірлер: 8
Many thanks for your tutorial. By the way, private VLANS works for me in EVE-NG. I am using i86bi-linux-l2-adventerprisek9-15.2d.bin
@RobRikerTechChannel
4 жыл бұрын
Ok, I'm using IOSv-L2. I tried it out and it failed to work. I have physical switches for testing it out.
Is it possible to use your ASA as your default gateway for multiple subnets, and apply a vlan tag to each subnet, connect it to a trunk interface on the switch, then have the switch break out each of those vlan tags into "sub-vlans"? I can get this to work in my lab ONLY when using a directly IP'd interface to the router, without using trunk/802.1q - it's just a promiscuous mode switchport mapped to a primary vlan. Seems like an extreme limitation to me but maybe I'm doing something wrong. Also - if the answer is that you cannot do trunking to a "router-on-a-stick" like mentioned above, what would be the alternative? Would you have to put layer3 on the switch? Thanks!
@RobRikerTechChannel
3 жыл бұрын
Yeah, ASA can do sub interfaces. Use the "vlan 10" config model and not "encap dot1q 10" like a router. I don't think the switches I'm using in EVE support the separate VLAN options.
Do you know if there's a way to expand the pvlan config to a switch that doesn't support pvlan? Does works with both vlan and pvlan traffic?
@RobRikerTechChannel
3 жыл бұрын
Not sure honestly, never tried
Seriously need to review/edit your videos ahead of time. Very sloppy and inconsistent, also you’re struggling to stay on point. Simple = better. Keep it simple and flowing consistent.
@RobRikerTechChannel
2 ай бұрын
If you don't like my content, then move on.