....how many command strips would I need tho 🤔

@richarddelgado93

Жыл бұрын

😂

@RicardoHernandez-zr1pw

Жыл бұрын

2

@wolfpackstudios3040

Жыл бұрын

😂😂😂

@AaronJNeal

Жыл бұрын

All of them.

@oceanbreeze3172

Жыл бұрын

A complete grid on the back

I mounted my TV, then hung on it like you did. The bolts came out and the entire mount broke. Then I realized it was 2am, I wasn't even in my own house and I was naked.... Thanks for the video.

@skimaskmayski4434

2 ай бұрын

🤣🤣🤣🤣

@ink_prince

Ай бұрын

This comment gave me a heart attack. 💀

@FSUSean2112

Ай бұрын

OMG dude LOLOLOLOLOL

@Tollykay364

26 күн бұрын

😅😅😅😅

@rmflores7096

21 күн бұрын

You need to lay of the narcotics bro...lol🤣

Very nice tutorial. The only thing that I'd add my two cents into would be the portion of drilling the holes. I've found it easier to find and mark the studs and the approximate location of where the mount will go. From there, predrill and then secure one corner of the mount. I then level the mount up and mark the other three holes. That way I have a perfectly level mount with no holes that are 1/8th or so off. You have yourself a new subscriber, BTW.

@erayahernandez

Жыл бұрын

Smart af

@mrstrump7116

6 ай бұрын

3

Very thorough! Thank you for sharing, I feel like I could finally mount my tv onto the wall now! 🥳

Dude my mother tongue is Spanish but I am fully bilingual and men I can tell you, I didn’t realized that it was dubbed to Spanish nearly after 3 minutes of watching it, I don’t know what you are doing but it is awesome and I loved it excellent video

These ideas worked great thank you for sharing them.

Thanks sir for sharing this video watching from Canada 🇨🇦 actually this is helpful vedio i have to install my wall mount tv 60" inches sizes so again thank you for sharing 😊

I use a piece of OSB as a ledger. I mount the ledger to the studs, and then mount the TV bracket to the ledger.

I like how simple u make it and to the point thanks I was going to use those toggle bolts lol on the drywall 😂 I’m sure that was going to be a good idea

@JayyeMusic

Жыл бұрын

it’s not a bad idea if you don’t have studs as an option

Great video, thank you! I’m a disabled vet so I’ll have to pay for someone do it for me, but it’s good to know to do it properly. 👍🇺🇸

I was looking for a video on how to install a tv mount on a drywall with resilient channels. Do you have that or what ‘s your recommendation to successfully accomplish that? Thanks

For those who are curious, if you are sitting 2m-2.3 meters away from the TV you have a tolerable error margin of approximately ≈20cm (before factoring in mount functionalities), in the placement of your mount. This is assuming the video-poster is correct regarding the 5degree rule in order to avoid feeling neck discomfort.

@lilx_king5882

Жыл бұрын

Jesus'

@lotplays12

Жыл бұрын

Ok

@jojoe9427

11 ай бұрын

my brain has an intolerable error from reading this message

Muchas gracias. Si, rodeos, facil y rapido. 💫🙏💫

Remembering when flat screens first came out how bulky/heavy they were and it was a very daunting challenge to mount them back then. Today, TVs are very light and mounting them shouldn't be as daunting as before.

Hello there, loved the video, this grandma got the TV wall mount done thanks. QUESTION: You said you were going to put the description of the TV wall mount you got off Amazon. I don't see it. Can you send Please. Thank you

Is this VESA compatible? Would like to get this for my 65" Phillips Roku flat screen TV. Just wanna make sure it will work together.

How tall are you? To give me a better reference on how high to mount my TV. Awesome, clear, consice video...thank you...

Any tips if i want to mount my tv on a partition made out of wood? Im planning to install swivel mount

The little hand 🤚 😂😂 , great video! Thanks

Thanks for the video

Did you plug the TV in on the outlet that the mount covered?

HELPED ME THANKS - MAT

Your affiliate link for the TV mount redirects to a single gang electrical box. May want to check that. I was interested in which model you were using

Thanks!!

Thank you

Should you avoid studs near outlets?

Thankyou!

Does the outlet need to be behind the bracket? I would think it can be below it too since the tv is large enough to hide it?

I watched a video and it said the optimum mounting height for a TV is the bottom needs to be 42" off of the floor. Not that I follow that, but use it as a rule of thumb depending on the situation.

@bonedustmunroe

7 ай бұрын

I always use the top of the nearest light switch cover as an arbitrary height to line up with the bottom of the tv, for general wall install of anything bigger than 75.

The only thing I would like you to show is that kind of bolt you use , I always get the center of the stud , but I use toggle bolts , can you show the kind of bolt you used? I know what to use when is wood studs but metal studs are different

It would be nice if you would’ve shown how do you put everything on the T.V. in the beginning.

haters gon hate, this video helped me a lot with my first tv mount. thank you!

With the option of wall anchors that individually hold >= 90lbs plugged into standard drywall, is it absolutely necessary to anchor to studs?

@richyoung4051

8 ай бұрын

YES. dont trust those drywall anchors with your expensive tv. just play it safe with studs. theyre your friends

Did the bolts you used to fix to the wall come with the wall mount?

Thanks that was useful for me.

Great video

Great video. Automatic sub and good choice with the coke haha 👍🏻

How far does the tv sit from the wall when using this mount?

What a timely video! Bringing home my new tv right meow.

@LRN2DIY

Жыл бұрын

Happy TV hanging, brother!

@donovanburrell2354

Жыл бұрын

@@LRN2DIY do I need a new tv mount but already have one?

@donovanburrell2354

Жыл бұрын

@@LRN2DIY can I uses any new or old tv mount for a 39 inch tv

@LRN2DIY

Жыл бұрын

@@donovanburrell2354 As long as the mount supports the TV’s weight, sure. It also has to be compatible with the mounting pattern on the back.

@donovanburrell2354

Жыл бұрын

@@LRN2DIY thanks man

This was a good tutorial! Thanks! ❤️🙏🏻

You can use spacers also

If you use the bottom of tv as a reference, measure from the bottom of the tv to the top holes on the mount

Hey I just got that treadmill too but it’s pretty janky (at the legs, the covers hit the conveyor belt thing) did you run into the same issue?

@LRN2DIY

Жыл бұрын

We don’t have that issue and have had the treadmill for probably ten years, but it’s super loud and also the screen occasionally blanks out toward the end of a run. I guess I expect some of that after so many years.

I feel like no tv mounting videos discuss how to work with the studs to put the tv where you want (not just going with wherever the studs are). Any tips?

@vincelorona4026

Жыл бұрын

Get a 2x4 drill it into the studs and then you can connect the tv to the 2x4 wherever you want

@beautifullybrokenempress6631

Жыл бұрын

@@vincelorona4026 whose doing all that

@Dredugz

9 ай бұрын

If part of your mount is only landing on one stud, you can use toggle bolts. Ensure you get the ones for the appropriate weight.

@user-mn1zu5tl5i

21 күн бұрын

@@vincelorona4026that’s how I mounted the wall bracket. I bolted 1/2 inch plywood (18” x 18”) to the stud, painted it to match the wall, then attached the wall mount to the plywood

It would have been nice to have showed how to place the mount on the TV as that is part of the mount process.

20 dollar ONN mount at walmart works great for me. 75 inch tv

very good

I'm going to hire a task rabbit for this

What model hisense?

My house is a 100 years old - there know studs - just plaster and lathe. Any suggestions?

Does that wall have metal studs or wood studs ?

@rawbroccoli5547

4 ай бұрын

Lol

I dont have any studs... can I still mount?

Forget the tv you have new exercises tool

Sadly, my bedroom had 24" on center not 16". So my 75" TV is essentially supported by a single stud.

@ZeroColdx911

11 ай бұрын

You can fix that by installing a ledger board that spans 24” then attach the mount to the ledger

@MikeFuryTech

11 ай бұрын

@@ZeroColdx911 I'd have to tear the walls open, wouldn't I?

@jimsomerville3924

9 ай бұрын

Some mounts support both 16 and 24" interval studs.

@ZeroColdx911

9 ай бұрын

@@MikeFuryTech no you don’t, it’s just a piece of wood mounted on top.

@StevesStrayStuff

7 ай бұрын

I had the same problem. I put up a hardwood backboard and trimmed it up with quarter round moulding.

What about wiring in the wall?

How did you check if there was romex, conduit or pipe running through the stud where you drilled? I am thinking about drilling 1/16 to 1/8th inch at a time and then will look inside the hole with a flashlight and see if there is a cavity where romex or pipe may be running through. Thoughts?

@Armand0008

7 ай бұрын

There should be metal plates there. So if you feel a lot of resistance when drilling that should be your clue.

What if I only have one stud there the tv is supposed to be and the other ones are 24 inches apart?

Your TV is only as a secure as your mounting screws in the drywall doesn’t matter that match how much that bracket can hold

What kind of stud finder was that?

I'd love to see you start using PPE (safety glasses minimum) you may not make mistakes but your viewers will.

Jesus Loves all of you guys

Do you have to use the stud scanner?

@sirpsychosecksi4953

10 ай бұрын

No it just helps find studs

My wood studs in the wall are 32inches apart What do I do ?

👍

Know how to this but always watch can always improve.

Can you just come mount mine for me lol 🙈🙈

my drill isn't big enough to drill in the lag bolts?

This sounds too complicated.I don’t have stud finder can I do it without it?Sorry for the stupid questions but I have limited space in my room.I don’t have anyone to help me mount the tv

Verubgood video i mounted 1 today but to a brick wall i find it easier pre drill bolt it using bolt and wall plugs then hook bars to tv then hang of course it wernt that easy

What about a wall mount that u can tilt up and down

I think tv installers videos should specified if the studs are wood or metal , since depending on the material , is the kind of anchor that you would use , and some people that has no knowledge of that , can get confused and use the wrong anchors

@vivifyproductions9608

Жыл бұрын

He didn't use anchors

Does size matter

The little plastic hand!😂😂😂

I'd love to see one of these done into brick or concrete.

@avsrule247

Жыл бұрын

Would be essentially the same process, except you don't need to look for studs! Just get some tapcons and drill out your holes

@Mecambrea77

Жыл бұрын

That’s actually easier !! Because you have a solid base

Which tv mount is this

@LRN2DIY

Жыл бұрын

Links are in the description.

What exactly are studs? You referred to them a lot in the video and I don't know what it means.

@TwinbeeUK

9 ай бұрын

Vertical strong wooden beams behind the visible wall that support it.

@zeus_2001

7 ай бұрын

If you don't know what studs are, you shouldn't be drilling into the wall for massive lag bolts cuz the risk of catastrophe is high.

I got the same mount for $80 at Walmart

And what if the drill won’t go deeper than an inch on every wall in your home as if it’s made of metal?

@TheSuperMp3

9 ай бұрын

Sounds more like concrete walls. If that be the case, you'll need an impact driver to drill through. It basically hammers while drilling.

😂😂😂😂the thumbnail goes crazy

I just wanted to see u hang off it LOL

Mentioning that studs can be 24 inches apart instead of 16 would have been nice, new mount I bought is useless. Sure I should have done my own research but if I’m looking at an instructional video about this then that means that I am obviously ignorant on the matter and would have been nice to be informed. Have to return this Mount and buy one compatible with 24 inch studs. Thanks though I guess. (I’m a lil salty)

@ZeroColdx911

11 ай бұрын

You can attach a ledger board that spans 24” then install the mount to it

@Christian_Villanueva

11 ай бұрын

@@ZeroColdx911 bold of you to assume I know how to do that lmao. It’s cool I just returned it and got a compatible one.

Bro used his strong hand to do all this lol

Gracias Toni Kross por el vídeo

If the ladies don’t find you handsome they should at least find you handy

Yea I’ma just hire someone to do this

Here’s my dilemma, and maybe y’all can offer some input… 1.) Where things are right now- Currently, I have a 42” TV in my office/fun room, on a wall mount. Said wall mount is positioned 6.5 ft. above the floor (IF that’s of any importance). Moving on… In addition to a Dish Net Joey, there are also TWO video game 🎮 consoles hooked up to the TV. One evening, I was playing a game ON said TV, but suddenly, I had an epiphany (moving on here)… 2.) Changes warranted- In order to get the full benefit of “maximum gaming performance and enjoyment”, I need a larger TV …😊!!! I’m thinking, somewhere in the vicinity of 65-72”. Now, in order to do this, I’m thinking that a wall mount that can sustain something in the vicinity of 200 lbs. will give ME piece of mind. My concern I’ve been building up to is THIS: -I like where the wall mount is, but w/o getting into TOO much detail, bottom line, I have….concerns regarding gravity and stability!!! -I’ve done measurements to see if said TV w/ said measurements will fit in office/fun room, so no problem THERE❤️🤍💙. -The TV I want IS 💯% video game 🎮 compatible (If I wanna WATCH-but not PLAY-TV, I’ll go into the living room. So again, all good there. Again, I just have reluctance with trusting the stability of the NEW wall mount in the ORIGINAL spot. All input and advice GLADLY welcome 🙏… CHEERS 🍻🍻🍻🍻🍻🍻🍻🍻

I got my 200lbs bracket from Walmart for $23.

I always find the stud when i stand in front of a mirror.

Show it to us

hang on the tv can the tv mounts hold the entire 200 lbs

I think I can I think I can

thanx dad😅😅😅

I miss floor model tvs

help me mount my tv

yo that’s really funny how many strips lol

What if you accidentally drill into an electrical cord or a water pipe ? 😅

@LRN2DIY

Жыл бұрын

That’s why it’s important to use a stud finder and make sure you’re on a stud. It’s still possible to drill into a wire but it’s extremely unlikely. Using an endoscope is always best but most people don’t bother.

@DaniPooo

8 ай бұрын

@@LRN2DIY I have a multitool that finds both studs and electric wiring.

I came for the great instructions. I stayed for the Coke.

Your outlet is conveniently located behind the TV spot. I wish that was case

Ok $150 ???? Mine was like $40…. Now I’m scared haha why is mine so cheap

@h.r.169

7 ай бұрын

I mean I definitely wouldn’t cheap out on a tv mount cause then something might go wrong.

check for live wires! 😂