Weird how you’re like “here’s all the info you need to build this” alongside “we can’t tell you the exact details”. What’s your aim? If this is legit it would prove all the conspiracies right and mean you’re in grave danger. The only way to save yourself is by making everything freely available.

@dmann55398

Жыл бұрын

The aim is all the ads you watched.

@janengel1985

Жыл бұрын

@@dmann55398 correctly

@user-sw8lj4jn9c

Жыл бұрын

😊👍👍👍💯

@wisdomafoolweakness3391

11 ай бұрын

I havent got an ad yet while watching this video

@zehlersan

11 ай бұрын

Very true

Hi, you did a great job! With my friend I'm planning one almost the same as yours, but mine will be 10 KW with larger magnets, the current can be selected 110/220v with the different sockets. The whole frame will be made of hard aluminum, the starting system is recoil like yours. I will use it privately, I will make prototypes to sell privately to all those who want to save money, for a house in the mountains, by the sea, etc. Good job everyone

@UnrealTransformer

11 ай бұрын

And i plan to build a universal motor that is driven by my undivided love that will put the whole world into the golden age. Yeah.

@simonallan9941

11 ай бұрын

And hopefully not mysteriously disappear 😮

@sonnyh9774

11 ай бұрын

I'm interested

@paulmoreau-wn8hz

11 ай бұрын

Will you ship to Canada? I'll buy one

@JRFrogman

11 ай бұрын

There’s a sucker born every minute 😢

Alloy composition (With the help of AI): Silver: 77% Aluminum: 15% Copper: 5% Manganese: 3% Key adjustments: Slightly lower silver content to reduce electrical conductivity and minimize eddy current losses from induced swirling currents in the rotor. Higher copper content to maintain conductivity, but manganese added to counteract copper's tendency to increase eddy currents. Manganese additions also increase resistivity, which helps control eddy currents. Manganese provides good hardness and tensile strength as well, substituting for zinc. Lower conductivity alloy helps reduce magnetic brake effects from induced rotor currents opposing the rotating magnetic field. Other refinements could include: Trace boron or silicon for further resistivity. Grain refinement and heat treatment to break up the crystalline structure. Semi-conductive coating on the rotor surface to impede eddy current formation. Can anyone comment?

@McFlysGaming

10 ай бұрын

What question did you ask AI to come up with this equation?

@Optimiz_IO

10 ай бұрын

@McFlysGaming p0:In the context of a perpetual electricity generator, only knowing that the rotor prototype holding the magnets is made of an alloy composed of silver and aluminium for the rotor. a very important clue is that the alloy is composed mainly of silver and aluminium among other materials. The total volume of the rotor is 1073.3 cubic centimetres and it weighs 7.6 kilogrammes. also was applied special treatments to this alloy. Suggest what this alloy is made of and provide all the proportions for each compound. p1:Suggest a composition for this rotor to work in an optimum way in the context of an electrical generator. p2: Take into account eddy current and magnetic break, things we want to avoid for the alloy

@McFlysGaming

10 ай бұрын

I got this from AI If cost is not an issue, and the silver content needs to be more than 75%, the composition of the alloy for the perpetual electricity generator rotor could be adjusted as follows: - Silver: 85%-95% - Aluminum: 2.5%-10% - Copper: 1%-4% - Zinc: 0.5%-2% - Nickel: 0.5%-2% - Magnesium: 0%-1% - Titanium: 0%-1% - Beryllium: 0%-0.5% - Silicon: 0%-0.3% This composition would have an even higher silver content, which would provide even greater electrical conductivity than the previous composition. However, it's important to note that increasing the silver content beyond a certain point can also reduce the mechanical strength of the alloy, so this should also be taken into consideration. Again, the exact composition will depend on the specific properties and performance required for the perpetual electricity generator rotor, but this provides a general idea of how the composition can be adjusted to increase the silver content.

@happy2be3one

10 ай бұрын

My idea is 82%Sn, 17% Al and 1% Ag

@McFlysGaming

10 ай бұрын

@@happy2be3one Tin is a good idea but it’s mostly silver and aluminum. According to Artificial Intelligence, it cant have to much aluminum because it start to lose back emf impulse.

Brawo, dzięki za info

@piotrlisiak7205

11 ай бұрын

będziesz coś działał? to daj cynk..

This appears to be the modern day equivalent of the alchemist's dream of turning base metal into gold and flies in the face of physics.

@jerryadams4449

Жыл бұрын

the great thing about science is that it's new understanding and discovery drives its growth,or should because the laws of science are never complete or fixed yet, big industry hides discovery for profit. establishment science peers barely recognise citizen science which is a disservice to mankind because it is where all invention outside the 'laws of science' is to be found,outside of the box..sadly much invention is literally murdered, I have direct experience of this..proof if you will..

@chaorrottai

Жыл бұрын

not really, the second law of thermodynamic states the sum entropy of a closed system can NEVER decreases, it was falsified and proven to be incorrect when heat pumps shows COP > 1 for energy transfer which is reduction entropy. Thermodynamics has its uses but lord Kelvin was just a man and just because he was a lord doesnt make his theories laws.

@aywitb911

11 ай бұрын

I dont think it does. What they have done is minimized or eliminated the eddy currents. I saw a video years ago with some people doing something very similar. Get rid of the eddy currents then the magnets will pull it around with very little friction. He just made it way more efficient.

@heinzpg

11 ай бұрын

@@aywitb911 Do you really think the conservation law of energy is only valid if eddy currents are present? By minimizing eddy currents you can increase the efficiency of a working device but minimizing eddy currents doesn't make a non-working device work.

@aywitb911

11 ай бұрын

@@heinzpg Uh have you completely forgotten about the magnetism. That is whats used to spin the device. Its the field coming from the magnets, once they die out however long that is then it wont work anymore. Its not really over unity its just creating energy from the magnetic fields. They go away and so does the energy.

Hello, I see that you are not answering a single question that I asked you. Where is the phase shift on the stator part where the coils are placed. There are not any! because to create a phase movement it is necessary to have a phase shift as for the part of the single-phase motor because otherwise the voltages cancel each other and the system cannot continue to turn. So how do you do? I am really waiting for a response from you. THANKS

@simplethings2410

10 ай бұрын

FYI. It only has 2 phases. Each with two windings (facing opposite to each other) connected in parallel..Separated by 180 degrees apart.

@user-ow6gb9yh6e

2 ай бұрын

так там конденсатор стоит он и дает сдвиг .

Thank you for your generous good deeds. sharing ideas. I love your ideas of free energy and further helping people in hard times. I hope KZread doesn't ban you.

This will never see the light of day unless it is shared open source with the public. The patent process has a history of supressing over 5000 amazing technologies like this one. The current energy industry will stop at nothing to prevent this from coming out. Why would they ever be ok with it? The world needs this so badly right now. People are suffering. We shouldn't have to be slaving away to have electricity anymore. We shouldn't have to pay to live on a planet we were born on. Everyone deserves a home and access to power. This needs to be released before it is taken away for good. Secrets make us weak and vulnerable to crimes against humanity. All anyone cares about is money. Be a hero and let it out of the cage before you lose the chance. That being said...thank you for showing us what you have. Hopefully we can rediscover the silver aluminum alloy process, and recreate it. Sounds really specific and hard to figure out. Thanks for the tease. I can't decide if I'm mad at you or not. Add another to the "almost got it" list...

Dziękuję ❤

@piotrlisiak7205

11 ай бұрын

jakbyś coś działał..to daj cynk..sam jestem za cienki technologicznie..

Assuming the alloy is Silver/Aluminum only, the proportions are roughly 56.24/43.76 volumetric and 83.31/16.69 weight ratio Ag/Al. The other unknown components might alter the proportions of these two. The price of roughly 6.5 kilos of silver is around 5.2 k USD. Investing that much in the rotor would be quite a leap of faith...

@oLoGoS

7 ай бұрын

yeah but if it works.... also IF this is pushing 20 KW of power it's substantially cheaper than a generator of the same strength

Muchas felicidades! Gran invento! Gracias por compartir!

15:05초 전원 분리 시 모터의 회전수는 소리로 비추어 감소 하는데 사용 전력은 전혀 변화가 없더군요. 또한 마지막 전원 스위치 차단 전에 모든 장치의 전원을 먼저 끄던 것을 사용 상태 그대로 두고 모터의 전원만 스위치 오프 가 아닌 콘센트 분리로 보여 주었다면 더욱 확실한 검증이 되었을 것인데 대단히 아쉽군요.

@yayaheryadi9480

10 ай бұрын

이거는 고지말

Amazing how when each heater was turned on the generator didn't bog down whatsoever. That definitely made me skeptical...

@user-kx7he3un6h

10 ай бұрын

I think there is a catch with the distribution outlet when it was turned on. If it is not connected to the network, the indicator should not light up. And why did it light up for a sec? Although, perhaps, the capacitor was discharged on the neon lamp!

@simplethings2410

10 ай бұрын

@@user-kx7he3un6h even if you only turn it by hand, there will still be a small generated voltage enough to light the lamp.

@user-kx7he3un6h

10 ай бұрын

@@simplethings2410 You mean lamp on the button of the power outlet? If you watch the video slowly, you'll see it. I plan to make a copy of shown "liberty engine" to prove or disprove the idea. It looks like two coils would be enough to power the motor!

@simplethings2410

10 ай бұрын

@@user-kx7he3un6hIt is just the two coils facing each other that is connected in parallel lights the lamp..and the other two coils connected also in parallel powers the motor..There is no electrical connections between the two sets of parallel coils. They are two different circuits..Whatever happens to the coil set where the lamp is connected, does not affect the other that is driving the motor. You can obviously see that in the electrical diagram.

@simplethings2410

10 ай бұрын

@@user-kx7he3un6h Watch the clip again and you will see that it is the light coming from the ceiling of the workshop reflects to the light button that is why it looks like that light it is enrgized prematurely. It is just a reflection of the light above.

You guys did a great job!! It would be great if you could take an old car body, like a VW Bug, put an electric drive motor in it and the Liberty Motor and drive it around, that would be too cool. I reall wish those of us who do not have a machine shop could purchase the parts and put this together for our own family home use.

@franckverdu7140

10 ай бұрын

pour arriver en procedure de coulage de fonderie avec les composants annonces le process doit etre realise sous HAUTE PRESSION,car les temperatures de fusion sont toutes differentes ,le degazage et la restructuration moleculaire egalement.tout ca pour dire que cette "recette miracle"est une grosse arnaque car pour le commun des mortels ,c'est inaccessible donc inverifiable .quand on regarde attentivement l'aspect du rotor ,il est parsemé de bullage .le moteur utilise ne correspond pas du tout aux specificites annoncees (RPM dimensions d'arbre ,nombre de poles et sur le boitier ouvert en demonstration le positionnement des barettes de connexion donc apres avoir decortique toutes ces infos la realite est que C'EST UNE GROSSE ARNAQUE. le depot de brevet n'existe pas non plus (verifie aupres de L'OMPI ainsi que tous les organismes internationaux la pseudo conference de presse a ete piocheé sur une apk TV DONC ARRETTEZ DE PRENDRE LES GENS POUR DES IDIOTS .la diffusion de FAKES tout ca pour escroquer les personnes credules .bientot une petite enquette feras stopper cette aberation et il faudras rembourser tous ceux qui se sont abonne pour avoir LES PLANS SECRETS DE FABRICATION

@jl12781

10 ай бұрын

@@franckverdu7140 Pouvez-vous croire le nombre de personnes qui penser que c'est réel ? J'aimerais vendre à ces gens un paradis tropical dans la toundra arctique ! Je pense qu'ils ont dit que l'alliage était un mélange d'aluminium et d'argent. Puis il a poursuivi en disant qu'il n'y avait pas de courants de Foucault. C'est alors que j'ai commencé à éclater de rire. Comment diable 2 matériaux extrêmement conducteurs comme l'aluminium et l'argent peuvent-ils ne pas avoir de courants de Foucault !? Ferriday et Maxwell devraient ressusciter d'entre les morts et se tenir dans un coin de la pièce et rôtir ces idiots jusqu'à ce que leurs parents les renient pour leur stupidité ! Haha!

@jslevenson101

9 ай бұрын

Yes put a quiet version of that in an electric car so it generates its own electricity. Yes.

@MyLevelheaded

8 ай бұрын

go watch troy reeds driving a midsized automobile 12 years ago...

@user-gp8bx1km4s

8 ай бұрын

How do you expect anyone to believe any of this really works if we can't get full details and disclosure. And why is this motor not front page news .we should be driving cars with this type of motors.we should all be powering out lives n homes with this device. You guys would be multitrilionaires

Parabéns pelo excelente trabalho e sucesso em novos projetos!!! 👏👏👏

I am very happy to your invintion amigo because u are kind and very talented like Tesla to give more idea to the universe to give possible light at all around the world power with out any problem like to buy gasoline or any part of ur invintion almost zero maintenance brother you are good people I hope used this for small tiny house every day life used like anything like light,fan, electric iron or etc.bro bravos amigo iam very proud of it ur the One amigo!

Thank you for doing this great service, this engine will help me make a 2X version for my land and sea house that I will build some day. This would make a drone fly forever BTW!

@whoryou1131

Жыл бұрын

The millennium falcon power blender for wet bar

@abdelkader911

11 ай бұрын

لتطير حتى الأرض السابعة والعودة إلى مركز الأرض وهكذا دواليك وبدون توقف ايعقل. مع أن الفكرة غير قابلة للتطبيق

Im in love with it.... Congrats!

Super,ďakujem chlape

Вы конечно молодец что это заделали ну и другим дайте возможность сделать у себя дома это будет отлично 👍

Ive seen many of your vids, on the earlier ones you said you would give last details to diy our own build. Im sure you understand everyone skepticism. If it is possible you should open source this so the technology is not lost when big money comes, buys, hides it from the people.. i know you have talked about that. Others have to be able to replicate.

@chaoskiller1758

Жыл бұрын

I agree it needs more community support.

@nickshow6876

Жыл бұрын

It’s easy asf my uncle can replicate it he’s also invented power beat batteries and many other devices that work your just an amature that knows nothing

@nickshow6876

Жыл бұрын

@@chaoskiller1758 you will end up dead that way

@janengel1985

Жыл бұрын

don't believe the promises

@theredeemeriam

Жыл бұрын

The only one true way to do this, is to make a video from start to finish with everything you need. Release it to the world, and watch it change this world overnight!

I love seeing that people are already building this. I'm working on another invention with electromagnets to get the money to build one of these myself. Your design seems even simpler than mine. I do have questions though. Are all the magnets running together, or do they alternate? How do you keep them cool? How do you regulate the voltage sent to the magnets? Could I buy one of these for myself? I could actually skip my own build, and move to the next invention without having to go through the whole distribution process. This is a Tesla idea. It was meant to move humanity to the next level of freedom. That's why they killed him, and buried his ideas. I've had this idea in my head for quite some time now. I've told many people about it, and saw their eyes light up when they thought I just gave them a billion dollar idea. I tried to explain to them that they can not patent this idea. If you do, they'll come after you. They don't seem to get it. It's such a simple design, and once the technology is out there, anyone can build it. I love this.

@robertglancer347

11 ай бұрын

They didn't kill Tesla but stole his ideas, a family member of Trump one of the first, and JP Morgan

@paulpaintshop103

10 ай бұрын

Dream on baby

@arianlucatero7649

10 ай бұрын

Wtf am I on earth?

@robertzbyszek3238

10 ай бұрын

You must have knowledge

@robertzbyszek3238

10 ай бұрын

There's no power here

If you haven't already, you really should get in touch with Dr. Steven Greer.

I wish I could help develop 3.5 and beyond. I would rather use my intellect for this project than work a regular job. Blueprints are welcome 🙏🏾 but your craftsmanship and design are second to none. Can I have one? This is more than liberty it’s Freedom. Be safe and Godspeed!

I just hope that one day we all can have this.

@janengel1985

Жыл бұрын

nice home decoration

@oscarlopez6015

Жыл бұрын

La energía absoluta es un misterio pero tu trabajo es bastante creíble y razonable al vencer la ley de Lenz

@oscarlopez6015

Жыл бұрын

Por otro lado conseguír un equipo para la venta es posible

@danieroothman5555

Жыл бұрын

It's already in the pipeline to make it illegal for anyone to own any device that's not licensed.... licensed by the government😂

@romanhubal6680

11 ай бұрын

Не дочекаєтесь :(

amazing guys, i cant believe you continue to update, this is the real deal, hope someday you decide to release all information for the public to replicate those devices and become independant from oil companies, this is the way! thank you

@ScottFogarty-iv9wt

Жыл бұрын

This IS the information you have been waiting for.

@MrBademy

Жыл бұрын

@@ScottFogarty-iv9wt i believe we need to know the exact specs of the rotor alloy to be able to do it as i understand it has strong relation to the distance and type of transformers being used

@ScottFogarty-iv9wt

Жыл бұрын

@@MrBademy Hello Valentin, I totally agree with you. It would be wonderful if ALL of the work that they have done could just be handed over to us. It seems to me that is has been, with just a little more work left to be done. I read that someone was "hoping" to be able to have this technology "some day", in the "future". The action of hoping is waiting. We all have been hoping and waiting for something like this to come along and now it has. I think they have explained their position pretty well. I am so thankful that they have given us what they have. Now what are we going to do with it?

@MrBademy

Жыл бұрын

@@ScottFogarty-iv9wt Yes i completely agree with you, but I have one small conflict in my head, they want to change the world they want to solve the energy crisis and government control, and else on the other hand this well-kept secret, and cannot be sold commercially and they will never do, because of oil companies will never release that secret to us, so the cycle is closed and nothing happens. So this cannot be sold ever, the only way is by replicating, why not release all to us in this case with the goal to change the tyranny and corruption of the government systems. And again they do release already enough details and am glad that they are doing this and really grateful. My question is now can anyone replicate it and have you succeeded so , that would be the proof

@theredeemeriam

Жыл бұрын

​@@MrBademy from what I understand it is a silver/aluminum mix. You can find alloy makers that make it with 5% and 10% silver mix. I would guess it is one of those two!

patent konusunda iyibi açıklama yaptın hem kendi adına hem ülken adına hemde dünya adına net ve pozitif açıklamalarda bulundun heerkes senin gibi olmaya bilir bunun için teşekkür ediyorum hem dünyanın hemde gelecek nesillerin senin gibi insanlara ihtiyacı var başarılar dilerim TÜRKİYE DEN sevgiler

You guys are awesome, I'm proud of you, thank you!

Assuming that the alloy is made up of aluminum, silver, silicon, barium ferrite, and strontium ferrite, the likely proportions of the elements in the alloy are estimated to be: Aluminum: 47.5-50% Silver: 16.7-17.8% Silicon: 0.3-14% Barium ferrite: 32.9-38.4% Strontium ferrite: 0.9-1.5% there were other models that came up potentially including small percentages of Magnesium (for structural strength), and potentially even smaller amounts of Dysprosium, Terbium, and Praseodymium(to enhance magnetic properties). but not enough to warrant including for the basic breakdown. magnesium has properties that are emf shielding so i dont know if that would be good or bad in this context, but if you include magnesium to the list then the model im using allows for a proportion range of .5%-15% Note that this is not including the calculation required to subtract the weight of the neodymium magnets from the total weight before applying the proportion calculation. that would still need to be done to be more accurate. or you could just calculate the weight of the magnets based on the known weight of neodymium and the dimensions of the magnets and then just include the known % of the weight thats neodymium in the proportion calculation. both equations would tell you the % proportion of neodymium in the rotor.

@lappieslabuschagne2428

10 ай бұрын

Tnx. This info is very helpful. Much apprciated.👍👏

@TimurKolesnikov886

9 ай бұрын

did you get a prototype with a positive result?

@tonyromano8337

9 ай бұрын

Ur really smart lol, any updates ?

@escoson555

25 күн бұрын

Impressive. How did you come up with those numbers?

I'm not an engineer or electrician or anything like that, but it seems to me like the only function of the rotor is to hold the magnets. Couldn't it be made by a block of acrylic plastic or even some laminated hardwood or plywood? No eddy currents in those, and the RPM isn't fast enough to rip the rotor apart. I also agree with others, there's no way anyone will survive trying to make money by an invention like this (if it actually works). The oil companies will bury both you and your machine until the last drop of oil has been squeezed out of the Earth. Only chance of survival is to make ALL information about this freely available online so that it will be copied and spread.

@dixy1221

Жыл бұрын

I am thinking the same thing.

@alenpasnikov

Жыл бұрын

Yes and the thing is oil is not scarce, they just want that we think that it is scarce. It is created about 200 km deep in the ground and is naturally created by the earth because of the heat and pressure.

@lolly_bread

Жыл бұрын

@@alenpasnikov Oh I thought it was just crushed Dinosaur bones and plants! [sarcasm] Peeps, they've lied about nearly everything. We need to recalibrate our minds and seek truths only.

@janengel1985

Жыл бұрын

you made it much easier

@alenpasnikov

Жыл бұрын

I wonder if the rotor mass affect it.

Sorprendente.. gracias por compartir sus conocimientos felicitaciones

Wow very Useful this Project I like it, I will made it, many Video i watch in YT only this Vedio very Convinceng thank you for your effort and sharing your Project not for your content you Vlog but very useful to you Subcriber..God Bless You mor Power.

Hi congratulations you hit the home run!., You lifted the veil to a new light., Very grateful., Lest keep breaking barriers. Got a question an really hope you comment on it. , Do you think this could apply to a 3-phase motor to generate 3-Phase out on the similar set up thanks.

Silver and aluminum alloys cannot eliminate eddy currents, they only remove heat a little.

@pereximepere8439

9 ай бұрын

truth, only laminated materials can do like silicon steel

Thanks a lot, God bless you for sharing this engenering, it can save a lot of People's Life.

Protect these men at all cost!

The first law of thermodynamics states that energy cannot be created or destroyed in an isolated system. It can only be transformed from one form to another or transferred between different parts of the system. In other words, the total amount of energy in a closed system remains constant.

@LenovoLenovo-ff3qr

Жыл бұрын

Це теорія, а не закон.

@viljar1112

11 ай бұрын

Correct but who said this system is closed ... or we can't open it. There seems to be some weard ssht happening when large mass spins fast especially when coupled with electromagnet spectrum. We dont yet underestand how universe really works - keep an open mind, most groundbraking discoveris were treated with hate and ridicule but to day we are using those ridiculus things ☺

@GreenmeResearch

11 ай бұрын

Indeed for a closed system, for open systems in resonance, these laws don't apply

@comingviking

11 ай бұрын

@@viljar1112 "Weird shit happening" sounds conspicously like "then something magic occurs". What does "large mas spinning when coupled with electromagnetic spectrum" even MEAN? But of course, the test for any theory is not what it SOUNDS like, but if it actually works. Has this theory been put to the test outside of the genius's lab?

@1953Wes

11 ай бұрын

In any system large enough to avoid quantum dynamics, that's quite correct. Smooth flow, as this is, simply can't do what he's claiming. IOW, for this system to actually work, I'd expect to see frost forming on the outside of the engine as it pulled energy from the surrounding heat. Anyone who had a discovery that produced far more power than the input doesn't NEED to impress any physicists or such, they just need to hit up their friends for investment and start up production in a factory in China for the parts, and put them together in the USA. I GUARANTEE you the Dept of Defense doesn't give two flying whoops about theory, they'd buy ten thousand such generators in a heartbeat, IF you could demonstrate they worked with a real load, and could indeed run a day or two without stopping. The US Navy alone would want thousands of them, they'd LOVE to replace their subs nuclear reactors with a "never surface again" power supply. If it's easy enough to build at home, get China or India to cast up the frame and parts, and start selling them. There'll be plenty of customers - IF it is shown to work. Sigh. This nonsense has been around for my entire life, and history says it goes back much further, and somehow, despite the obvious demand, NOBODY has sold one that could pass an independent test yet. And don't gimme the "oil companies" thing, DoD doesn't care two whits for big oil, and would LOVE to cut off that billions of dollars of yearly expense and put it into developing new weapons.

Ini sangat bagus, terus lakukan uji coba untuk daya tahan dari partnya jika alatnya bekerja secara terus menerus tanpa henti, saya mau alat ini diproduksi masal, atau diciptakan lagi alat dengan skala yang lebih besar sehingga bisa dipakai sebagai pembangkit listrik yang akan berfungsi menerangi sebuah kota secara Gratis. Ini sangat bermanfaat sekali bagi manusia.

@shidiqhafidhulmuthohar4476

Жыл бұрын

Tapi bahaya Bro, mafia batu bara gimana nanti? pemerintah gimana? (khusus di Indo)

@skshahrukhshamim1449

9 ай бұрын

Am from India can u please help in knowing that the current generated by microwave coil is DC than how can you directly connect the same to AC motor fitted with capacitor and it's working please explain

@manikehmaanyan69

4 ай бұрын

Satu coil harus berdaya 220 v.... Itu ada 4 kayaknya masuk akal jika 1 koil konsisten untuk pembangkitnya

@victorpeh5110

4 ай бұрын

Но не для нафтовеків, урядів, міліардерів, і тих хто керує, світом, думаєте, це вже не винайдено, це вже давно винайдено, і приховано, і вже давно, світ направлено, в другу сторону, всі вчені перекуплені, навіть тесла, томі це і не виплело, а потом він продовжував, і вбили, всі вчиня в інстетутах, школах, все щоб вивчити дітей людей як їм потрібно, інакше, би людям непотрібні би буле вони, і льди би не булиб рабами. Люди ця брехня вже 1000 років. В світі багато чого можливо, просто нас вивчили так що ми нічого не бачимо, з самого малку.😢

WOW !!!!!! Hot dam free power ,yep that's genna piss some peeps out there off ,incredible engineering, well done 👍👍👍

You guys are the greatest! I’ve always knew this was possible , and you guys have done it ! It people like you guys that will change this world ! God bless and stay safe , don’t let Uncle Sam sweep this under the rug …

Se agradece el haber compartido algo k las industrias de todos los países tratarán de apropiarse x lo tanto deben tener cuidado de sus personas X otro lado, es un modelo k permite ser autosuficiente de la energía de las grandes corporaciones k brindan este servicio y k este sistema los va a perjudicar Quienes se decidan a construir este Generador de Energía Libre, deberá mantenerlo en secreto y ayudar a quienes quieran este sistema xk muchas personas solo se dedican a mal informar sobre este tipo de inventos Gracias x apreciar el trabajo k realizan en este canal, estoy dispuesto a construirlo y ya reportare k paso con este proyecto, sin más, muchas gracias de nuevo

Dear Inventor, I have few questions for you. 1. How you are maintaining constant cycle of 50 hz frequency. 2. Also how you are maintaining constant voltage of 110 or 230 ? 3. You said in video that you have created an alloy material to get the weight of 7.5 kilograms for the rotor. Can it be any other material with same weight 4. If the rotor weight is different and 7.5, what will happen?

@eppicshotgun1281

Жыл бұрын

The secret is that it never worked in the first place lmfao.

@kidwave1

11 ай бұрын

@@eppicshotgun1281 If it was viable, ...and if there goal was to truly help the world, ...THERE WOULD NOT BE A "MEMBERS ONLY" COMPONENT! GTFOH!

@musicalmemory8864

11 ай бұрын

farce , never happened !

@simplethings2410

10 ай бұрын

Couple it to a heavy flywheel, run the system and afterwards, remove the power supply to the motor, you will see that the frequency and speed will remain the same for quite some time. The heavier the rotor to stop turning, the longer for it to be able to sustain the speed even you remove the power to the motor before it coasts down.

@skshahrukhshamim1449

9 ай бұрын

Actually the heavy rotor is just acting like gosolin engine flywheel which helps in making engine continue rotation to complete stocks cycle or continuing smooth cycle

Great innovations for the future of the human human needs and living for the future energy ❤️👍

인생 이 발전이 이런것이지유 멋져

it was allows a capability magnetic repulsion has always been free energy it just needed to be harnessed and worked into a motor. great job and all the very best.

로터의 합금비율이 계산해보면 대략 7.6kg 중 알미늄(비중 2896.2kg/m^3:1.39kg-48%)와 은(비중 10500kg/m^3: 5.86kg-52%)정도인데 세상에는 그런 비율의 합금은 없고 직접 녹여서 만드는 방법 밖에 없네요. 현재 은1kg에 120만원 정도니 로터를 제작 할려면 1000만원 이상 들어가겠네요..

@janengel1985

Жыл бұрын

and the secret is revealed

@theredeemeriam

Жыл бұрын

​@@janengel1985 that's around 10 000 dollars not that bad if this is real I would pay it. Well worth it if you can take this anywhere you go!

@theredeemeriam

Жыл бұрын

Did you make this alloy? How was it discovered that this mix would yeild the results you needed?

@michaeldswson6253

Жыл бұрын

274.26 ounces if my math is correct. I hope I'm wrong though

@sangocklee5496

Жыл бұрын

열차단은 어떻게 해결했을까요?

Great innovation that helps mankind world wide. Superb invention!

Felicitaciones amigo

This is my first time watching this and if this is legit and works I sincerely need to say thank you. We all need to work together and rid the evil aka govt from all nations. Electricity is everywhere constantly and there's no reason we all should have free energy.

@whoryou1131

Жыл бұрын

If it was real they would sell the plans but 3.99 to be in the dance club aint bad

Podrias dar mas detalles de la aleacion ya que las aleaciones de aluminio-plata pueden contener entre un 1% y un 50% de plata en peso. Las proporciones exactas dependen del uso previsto y de las características deseadas. El Invento me parece GENIAL es lo que quise hacer desde niño. Y lo lograron, felicitaciones ING. N. TESLA & COMPANY

@TeodorUk

Жыл бұрын

Це і є основа. Це дуже тяжко. Немає шансів бро.

@TeodorUk

Жыл бұрын

this is impossible. the composition will not say, it will not work to guess) just look))

@dejansavic9380

11 ай бұрын

@@TeodorUk Ako je Aluminijum težak 2,7 g/cm3 to značli da je ostalo Srebro dali samu pravu.

@garyhugh2494

11 ай бұрын

Iwould like to know the alloy mixture

@phillipequeiroz5760

11 ай бұрын

​@@dejansavic9380 Him mension "mainly silver and aluminium, among other components". Nobody will can find the exact components with just this video. This channel is just a members farming

If this concept were truly functional, you could distribute the necessary components across various companies, avoiding any legal entanglements by merely selling these parts for various purposes. You could create a KZread video showcasing where individuals can purchase each required component to assemble it. However, it's evident that if a setup as simple as connecting a squirrel cage motor to a coaxial flux motor could generate substantial energy, it would have been achieved long ago.

God always blessing you... Good luck!!!

Back in the 70s and 80s on the Jonny Carson show if anyone out there can remember there was a man that is the creator of this great invention he used magnetic energy to power a light bulb this is truly astonishing

@MX6MAXIMUS

10 ай бұрын

That was Joseph Newman. It aired in Feb '86 same year I modified an input circuit for him to replace his waste of time looking for batteries.

@hemidart7

9 ай бұрын

@@MX6MAXIMUS You talk big for a nobody!🤨

Have you ever seen a 20000 watts generator or alternator? Just look at the magnet and coil size and guess , is it possible to get more than 1 kw power out of it?

@thebestcompaniondogforyou3367

11 ай бұрын

I would take a couple kw! Even if something like this sold for a couple thou US, it would be comparable to solar. Without the logistical and that nasty cloudy and night time thing.

@Ole_CornPop

11 ай бұрын

If we could somehow bend physics then it would be possible, until then we're stuck with solar panels and battery banks.

@thebestcompaniondogforyou3367

11 ай бұрын

@@Ole_CornPop I m good with that I have over 10k in solar

Ty not only works it looks great too!!! 👍👍👍👍

Heartiest Thanksgiving to you all guys, Yes, We Will serve to save this beautiful Earth 🌎, through our innovations, Global warming is our big concern..May God Almighty 🙌 Bless you all..Love You guys..the feedback smart circuit diagram is the cream of our project..

Loving the follow up video! Many thanks!! My prototype works but need a closer material rotor/ flywheel 🙃

@MrBademy

Жыл бұрын

would you mind sharing your experience and results please :)

@janengel1985

Жыл бұрын

yes, it can work well without the rotor

@MrBademy

Жыл бұрын

@@janengel1985 do you have any practical demonstration or video, i`d like to give a try i suppose some parts can be expensive so i dont want to waste money , thought i am a true believer and i already have 2 electric motors playing with the capacitors and diode bridges, but this looks much simpler than what i am doing

@djk2427

Жыл бұрын

​@@janengel1985 진짜로 성공했나요?

@janengel1985

Жыл бұрын

@@MrBademy you can't make electricity from electricity, try to make something mechanical and then connect coils, diodes and capacitors

Thanks for your detailed video, you have found me a beautiful work to try and with great joy

@simplethings2410

10 ай бұрын

You can even use engineering plastic (w/c is lighter) as your rotor for the magnets instead of aluminum-silver alloy. Just make sure to couple your rotor to another flywheel in the same shaft that weighs 7.6 kgs minimum (same as his). It is much better to have a slightly larger diameter fly wheel to have better rotational energy (moment of inertia). The fly wheel can be made of mild steel to make it cheaper. You can use this formula: Moment of Inertia = 1/2 x (mass in kgs) x (radius in meters)² - "take note of the squared". Take note also that the moment of inertia of yours should not be lesser than his to maintain an effective rotational energy at 1500 RPM. At that weight of the fly wheel, the speed of the system will not change significantly even if you remove the power to the motor for a couple of seconds or even you put bigger loads.

@spartakmece6441

10 ай бұрын

@@simplethings2410 thx for your reply, but you've already tried and tested if it works or its just theory?

Спасибо 🙏❤️

Thank you

This is so beautiful and honest.....hands down....the best video on youtube.....thank you so much...love you guys

@heinzpg

11 ай бұрын

I don't agree. There are better fakes on KZread than this video.

If a rotor is made of non-electric material, can eddy current loss be reduced? (ex. synthetic resin, logs, etc.)

You had me at 50 Hi's ! (50 Hz) 🤣 @1:03

nice workshop

Je me demandais comme pour les autres brevets, ou était la porte de sortie pour rendre ça crédible, et arrive le coup de l'alliage mystique, inventé par Luc Skywalker et valider par l'empereur lui même... Bravo, ce mystère va nous emmener vers une autre vidéo encore plus succulente 👍

@whoryou1131

Жыл бұрын

Luke skywalker power dance club box

@jl12781

10 ай бұрын

Je pense que c'est une machine à karaoké !! 🤣 C'est très déprimant de voir combien de personnes croient réellement à ces bêtises.

@jeanphil9682

10 ай бұрын

T'as un iphone et la télé tu crois qu'on a tout découvert? Les physiciens du moyen age qui postent pour faire le clown avec StarWars

Trimakasih sobatku telah memberi pengetahuan pada semua orang mau tanya kabel imelnya ukuran berapa dan berapa putaran dan juga ukuranya karen berapa x berapa trimakasih

Thank You, Very good job ! Gaetan

One thing that always bug me that would like to have cleared up: Let us just say your motor generates more energy than it consumes. Bravo. The energy is recirculated back to the motor with more energy to spare. This extra energy is our free energy supply. My questions are this: How does the extra juice not fry the system? Does the motor redline? If the energy builds up exponentially, the system will destroy itself. How do you vent out the extra current?

Hi Liberty Engine I’m building one copy of your generator with three-phase asynchronous motor, can you please put the link where to find the N52 neolithic magnet, with your measurements i can’t find online Thanks in advance

@user-tj3bc4pf1o

10 ай бұрын

N52 є на Alliekspress

@spartakmece6441

10 ай бұрын

@@user-tj3bc4pf1o lol I need with that measurements

hello, as you don't sell this machine, are there any plans other than electrical to manufacture it? best regards

@paulmason9180

11 ай бұрын

I uses 4 x primary micowave transformer gal 900 e4 coils wired in only the ac ones, nimdium magnets, 12x 3 North and North pole up and down South and South pole left and right And a 1400 rpm induction motor with starter capacitor

Thanks!

Absolutely true, The world waits for this God's gifts that will sustain enough Free Energy for generations to come..

Man, your good!!! And how about those magic wires!!! At 53 amps output that whole thing would be smoking and melting down even if those motor wires didn't melt like fuse links in just a few seconds...

I have a feeling im going to be seeing this channel in a debunk video

@FiglioBastardo

11 ай бұрын

100%

When The Frequency Meter Read 50Hz My Mouth Hit The Floor, If Anyone Knows The Secret Of 50hz, Then You Know How Powerful These Electromagnetic Motors Can Really Be For All Aspects Of Human Living To Stay In Perpetual Balance With Nature....

estaría bueno que en la parte del rotor y las bobinas hagan una cámara que este al vacío para reducir la fricción al MAXIMO de forma que tampoco se verá un poco frenado por el aire. igual puede ser que no cambie el resultado, pero capas aumente la eficiencia

@Geometriasaltar

10 ай бұрын

¿En serio crees que funciona esto?

Revolutionary technique guy,congratulation,i guess i'm like other people who discover bewildered and full of hope seeing this,i finally ask myself the famous question,obviously,of the acquisition of such equipment,have you put up for sale and if so,at what price,thank you for your answer...!!!???

❤🎉Wonderful.!!!

Could it be made more efficient by adding four more positions for magnets on the rotor?

@pedrosura

11 ай бұрын

4 more positions for the rotor would cause a doubling of the frequency from 50 hz to 100 hz. So you have to get different trabsformers (they are 50 hz) The motor would also have to work with 100 hz. They probably do not have a transformer and electric motor that match that. 20 kW for that size and no fuel consumption is the most efficient machine ever made. I am not sure why you are even thinking of making it “more efficient”. Than what??

@simplethings2410

10 ай бұрын

@@pedrosura right

how come a 0.55kw motor provides 20Kw? thank you

@chaoskiller1758

Жыл бұрын

you mean 75W producing 12kw if you were paying attention.

@ravvenhawk1110

Жыл бұрын

@@chaoskiller1758 no, the technical specs of the motor is 0.55kw, and it produces 12kw, I think because of the transformer

@chaoskiller1758

Жыл бұрын

@@ravvenhawk1110 ya but 75w - 12kw = net positive on power, from this one could scale it up according to needs. for ex. 2x or 3x that power could power a tiny house buy its self or half that for a drone to carry a human.

@ravvenhawk1110

Жыл бұрын

@@chaoskiller1758 thanks

@julienespel3833

Жыл бұрын

Is not Good your answers. Les bobines de micro-ondes génèrent par induction du courant grâce aux champ électromagnétique du 13 A par bobine ce qui fait 52A donc 52Ax230V=11997W soit environ 12Kw

Thank❤

chúc mừng hội nhóm sáng chế ra máy phát điện không dùng nhiên liệu hoá thạch. không ô nhiễm không khí môi trường thành công rộng rãi trên các thị trường mọi người được hưởng và sử dụng sản phẩm của các bạn nhanh nhất

A 1kg ingot of Aluminium (90%) Silver (10%) is $2147 CAD. And it may not match the alloy composition they are using. The rotor is 7.6kgs. $2147 x 8kg = $17,176. Just for the material of the rotor. 😢

@damianjones6546

Жыл бұрын

It would be a lot cheaper and easier to melt down the metal. Hopefully it won't be this expensive.

@gocro731

Жыл бұрын

@@damianjones6546 lol. So you're gonna go and buy some silver and get some aluminum cans then smelt it and cross your fingers?? 🤣🤣 you need to learn mettalurgy. Im skeptical that their claim that eddy currents are eliminated in a metal as conductive as silver 🤔

@damianjones6546

Жыл бұрын

@@gocro731 it's not as difficult as you think. There's plenty of videos on KZread. The only issue is the possible high ratio of Silver to Aluminium, it would cost too much for me to afford. I was hoping it would be the other way round with a high Aluminium content, there plenty of scrap aluminium around. They've also mentioned other metals too, so without knowledge of those other metals I could end up with some very expensive door stops!

@damianjones6546

Жыл бұрын

Silver is £600 a kilo in the UK. Still way too expensive to experiment with.

@timrader1260

Жыл бұрын

​@@gocro731 silver is a good conductor but is not magnetic. People test silver coins with a magnetic slide, it has just a slight magnetic resistance

what will be the cost of this generator? and when is it expected to be mass produced?

@princessgreen726

11 ай бұрын

Exactly my question. Let them produce the generator and we can buy it, those who can make it can go ahead on their own. Of this system is real them Mass produce it otherwise it is KZread geek device. Respond please. Thanks

I have a question regarding the rotor, since its a very dificult piece to fabricate, can it be used an easy to find alternative? Like, lets say 2 disc brakes conected with bolts or something, another question about the rotor. Its better to be heavy or light weight? Why is is it need to be alluminium and silver, because of them being non magnetic? Will a ferrous alloy rotor influence the magnetic field and reduce performance or it simply doesnt work? Thanks in advance

It Will Be Viral And Will Be DANGEROUS too.. ....I Hope Nothing HAve Anything Case Bad... Congratulation..

❤❤❤❤❤ Can you put an amp meter all the device while it is running the heaters to see what amperage can be drawn out of the generator ? ❤❤❤❤❤

Ok, I have a question :) Why did you use a different meter to measure the current? Maybe because it would still show 0 volt :) I watched your first prototype and what you're saying doesn't hold up. In the first project that worked on a similar principle, the key element was the "supposedly special" magnets. Now it turns out that magnets can be ordinary and in this project now there must be a special metal alloy on the rotor :) If you say that the rotor is a key element here, it must be wrong

@chaoskiller1758

Жыл бұрын

your don't know what you talking about go away.

@panmrf

Жыл бұрын

@@chaoskiller1758 then explain to me why in the first project you didn't need any special metal alloys to make it work only magnets? And now they changed their mind because the version with magnets is easy to disprove because there are only 4 possibilities how the poles of the magnet would be distributed to check it yourself :) The version with a rotor is better because it is an alloy and they can always say that it doesn't work because you have wrong proportions and in fact what the rotor is made of does not matter because the aluminum alloy with silver has no magical effect here

@noelcacayorin9020

Жыл бұрын

Yes I agree to your comment bro how if he hang up the motor so that we can see what's in there below the table

@noelcacayorin9020

Жыл бұрын

If there's no other way where he get the power supply supplied to the drive motor😊 why it continuesly rotates

@noelcacayorin9020

Жыл бұрын

I think that's for bloggers purposes only for the purpose of generating monetary value in there blog

Thank you god for all of us

Un capo lavoro namber one no coment !!!!!

Bonjour je vois que vous ne répondez pas à une seule question que je vous ai posé. Où est le déphasage sur la partie statorique où sont placés les bobines. Il n'y en a pas! car pour créé un mouvement de phase il faut avoir un déphasage comme pour la partie du moteur monophasé car sinon les tensions s'annulent entre elles et le système ne peut continuer de tourner. Donc comment faites vous ? J'attends réellement une réponse de vôtre part. Merci

Muy bueno y revolucionario, mi duda es cuanto tiempo puede usarse sin que caliente el motor, por ejemplo si le damos uso domestico, o debería fabricarse uno de mayores proporciones? Felicitaciones y la verdad es que deberíamos, va, deberían los grandes inventores de estas genialidades, no pensar en la s grandes corporaciones que nos tienen prisioneros a su antojo, y dejar que estos inventos se divulguen por lo menos para generarles competencia y así reduzcan sus costos y me refiero a todo tipo de inventos y todo tipo de energía, y/o combustibles.

Looks great, sounds great like most too good to be true videos.

@chriskelly3109

11 ай бұрын

Twice now in the space of several hours he has deleted my comment showing how he is faking this. At 1:39 note the hole visible in the centre of his metal table top, where his machine is subsequently placed. Then examine 16:31 where a black cable is visible against the white background between the vertical barrier at the front of table and the underside of the tabletop leading up to the hole in his table and where he has carefully placed his machine.

This is amazing sooner or later everyone will have one or more

Спасибо ребятам 💛💙👍👍👍💪

@alexfast6620

Жыл бұрын

Это бред, я тебе такой же тест с тыквой вырабатывающей 100 квт сделаю. На этом видео минимум два способа как обмануть зрителей. Оба отпали бы при поднятии агрегата. Но нет он его не трогает

@janengel1985

Жыл бұрын

@@alexfast6620 we know it's a trick

@user-sw8lj4jn9c

Жыл бұрын

​@@alexfast6620 Тільки так! Це фейк для заробітку на ютубі.

@user-tw7we6ft5e

Жыл бұрын

​@@user-sw8lj4jn9c Самый простой способ проверить эту систему на работоспособность и доказать, ЧТО ЭТО не ФЕЙК : !!!! Убрать всё лишнее: металлическую раму ! Лишние провода и блоки ! НЕ КРАСИТЬ НИЧЕГО !!! 1. Прикрутить двигатель к прозрачной _!_ -образной из плексигласа стойке. 2. Навесить на вал барабан с магнитами. 3. На вертикальную пластину плексигласа, где закреплён мотор, вокруг барабана прикрепить катушки с сердечниками. 4. Рядом с катушками разместить по 2-ной розетке на каждую катушку и подключить соответственно. 5. Ничего нигде не соединяя, включить мотор в сеть 220v через Ватт-метр. 6. Далее -- нагружаем катушки разными электро-потребителями так-же через Ватт-метры -- проверяем ВЫХОДНУЮ МОЩНОСТЬ генератора ! 7. И на финише, отключив все нагрузки, проверяем САМО - ЗАПИТКУ ... ; когда система наберёт обороты, -- быстро переставляем вилку мотора из сети 220v в любую из розеток генератора. ( Может придётся пробовать разные варианты: выбирать розетку, менять полярность вилки, соединять по-парно параллельно противоположные катушки через розетки двойным проводом с вилками на концах ! Что-бы не было на системе лишних "соплей" !!! ) Потом, работающий агрегат, перенести на стеклянный стол .... Иииии..... , если мотор не остановится -- ЗНАЧИТ -- -- ПОБЕДА ...!!! ЗНАЧИТ -- НЕ ФЕЙК !?

Может я что-то пропустил...? Но мой вопрос "о параметрах сплава для маховика" опять остался без ответа. .. Уважаемые авторы видео. У меня нет сомнений в возможности ваших достижений. Однако, Вы продолжаете делать секретным то, что секретным быть не должно. Я не нуждаюсь в данных о составе сплава для маховика. Сообщите сведения о параметрах, обеспечивающих его работоспособность. И не надо включать "дурака"...Такое в серьёзном мире не сработает. А с другой стороны, я реально попробовал пройти по Вашим ссылкам, вплоть до того, чтобы стать Вашим спонсором. Но и этого я не смог сделать, так как Ваши ссылки не работают... Удачи всем нам.

@alexfast6620

Жыл бұрын

То есть дырка в столе вопросов не вызывает? И то что генератор все видео стоит неподвижно

@janengel1985

Жыл бұрын

How surprising!

Tuyệt vời 🎉

An attempt at a functional power generation module. I can't imitate the original, but I'm testing a device with a real output. The principle is in the cores themselves and in the connection of the coils. Look carefully at how the coils are connected in the original video. 1 phase is led to the socket from two opposite coils and the second phase is led from the second pair of opposite coils. They are not connected together. On the other hand, the coils are connected in parallel in the original, but in my case they are connected in series. Two opposite coils are used for one output in the original video, in my case it is four coils. If I had 16 coils divided by four, the result is four outputs, which are routed through the bridges and the outputs from the bridges are connected to one output. The next step might be to connect one output to the motor coils and try it in a cycle. Adding another coil from the motor as a load could increase the output voltage, see the phenomenon of output load with light bulbs. In the next video, we will try different connections, among other things, we will also try a different rotor. Please be patient.

Aonde podemos comprar essa maravilha????

@RRMS1123

11 ай бұрын

Me gustaría saberlo a mi también

@SilenceSupreme

11 ай бұрын

In dreamland.

На уроці фізики ми робили з викладачем подібну схему, але там ще були кондинцатори. Це було 16 років тому )))) і воно дійсно працює.

@alessandropezzoli8601

Жыл бұрын

Fai sapere come si può comprare