Here is a video about the turntable kzread.info/dash/bejne/Z56Nq5uzmLS_prg.html

@extraNaz

4 жыл бұрын

I love it!!

@tsugumorihoney2288

4 жыл бұрын

главный вопрос: НАХУЯ? не ну если изъебнуться, то пожалуйста, в остальных случаях отрез под 45 и все

@JatinderSingh-kk1xo

4 жыл бұрын

🔔🔔 Bravo 🔔🔔 🎯 🙏 📣 📣

@RJChannelCanada

4 жыл бұрын

Which Wheel is this ?

@ABeans07

4 жыл бұрын

Link takes me to same video

I never knock anyone for showing a video that may help another individual. Thank all of you. So very much.

@clarkeugene5727

4 жыл бұрын

You are a true Gentleman! Honor & respect to you too.

@constantinradulescu3842

4 жыл бұрын

Domnule

@Krishankumar-rq9ry

4 жыл бұрын

@@clarkeugene5727 C

Thank you for taking the time to show others skills they are trying to learn on their own.

I read a lot of negative comments here, but for some of us that are part time welders or fabricators, and do not have a full set of tools, only a manual grinder/cuter this is very illustrative. I will definetely build my own working table with this instructions...wish me luck

@tristanallsop376

4 жыл бұрын

I hope for you sake you do your research and learn how to do it correctly. Even with the limited tools available he did the job incorrectly.

@the__dark_king

4 жыл бұрын

This table is kind of gimmicky. I would never advise someone to build something like this. Better have a solid metal table. Then you add a hard rubber or thick plywood on top when needed. And you dont need the plywood or hard rubber to cover the whole table, just half will do. And basically it's only use is to dampen the sound.

@user-ks4sg4cs7m

3 жыл бұрын

@@the__dark_king Согласен, такой стол - излишество, но человек сделал для себя, для удобства.

@the__dark_king

3 жыл бұрын

@@user-ks4sg4cs7m Sorry. I didn't understand. Can you translate please?

Truly excellent! You are a very talented fabricator. Thank you for sharing!

Great video, Sergey. And yes, it is cost-effective. Difference is for those of us who were schooled in "Eastern" Europe, the technician is taught to perform numerous tasks. Welding, grinding, cutting, shaping... All of this is part of the curriculum. And of course, drawing and measuring.

Thanks a lot for your great welding video ! Very inspiring indeed. Thanks for sharing !!!

I'm just learning to weld, I think this is a perfect welding table. Thanks for the great idea. 👍

This was a lot of great work and tips. Thank you for sharing.

,, muy bien Bueno muchísimas gracias por mostrarnos tan linda experiencia que nos servirá mucho a nosotros

Sergey, you are doing some fine things here. Many of the little geometric tricks that you perform in this video are impressive, but not too cost effective for those of us who must work for a living.

Sometimes it not about if there are better/faster ways. It’s about the outcome. Having the knowledge how to do things different ways with the same outcome, make people like this guy very valuable. ...."in my humble opinion"

Simple and clear ! Thank you.

this is very useful idea, and we can use it in our everyday life. Good job!

Parabéns.. bom trabalho ! Congratulations.. good job !

I'm not a welder. I use to cut the steel on the Radiack saw and I did the grinding to remove the weld slag for the welders. You do good work. Impressive. Quality work. I can tell you are a really good welder.= that takes pride in his work.

i love the working table that you made i like to made like your tables thank you for the great ideas you have sir! 😍👍👏👏👏

Parabéns! Excelente profissional

Magnífico trabalho amigão!!!!

Very nice table brother that was awesome just started watching because I had made the 45 corners before. And watched the whole thing realised you were building the table

Magnificent work, creativity at its best. Could you please make a list of your garage tools and equipments in the description?

Nice table Sergey, great job.

Merci ! Beaucoup d'idées intéressantes pour un futur soudeur en herbe....

@FQ20

4 жыл бұрын

Wuiuui un fr

@mehdirachidi3489

3 жыл бұрын

kzread.info/dash/bejne/dXdmo5t6g8mrerg.html

congratulation ! I admire the way you performed thanks !

newbie here.. thanks i learn a lot of techniques from your videos☺️

Every Tradesmen got there OWN WAY OF FABRICATING WORK ETHICS - No-one is perfect-no, NO-ONE IS- AWESOME VIDEO - KIA ORA

I THANK YOU for sharing this KEWL Work-Bench/Welding Table! I gotta make one-o-Dees! Give that man a C-Gar!!!

@applejacks8160

4 жыл бұрын

I feel like your comment is a secret code

@nameofthegame9664

4 жыл бұрын

Apple Jacks or a stroke

Thank you for sharing awesome video.

THANKS FOR POSTING One thing, though..., turn your voltage and wire speed down and you can run a continuous bead instead of tacks, so when you grind it smooth, you're not grinding all your strength away. I'm not trolling...just helping the fellow out. Adjust your power till your bead sounds like frying bacon. If it's too jumpy, cut your wire speed back a tad. You need a closer wire stick out, for thinner metal and if you have a thick metal and a thin metal, throw most if your heat onto the thicker metal and wash back onto your thinner. Use an elongated cursive e pattern as you move. When you get to the end of your run, double back on itself before you stop. That wat you wont blow a hole in your edge. You'll see a BIG difference.

Boas dicas em diversos segmentos!

Espectacular tu mesa de trabajo. Avía imaginado una así, también

@ideafija

2 жыл бұрын

la estoy haciendo y está quedando como de 100 kilos jaja

Thank you for showing & great ideas

interesting weld techniques to keep in mind but I like the work bench best. Nice work

Полезные действия с профильной трубой и классный верстачок.

@user-gw6fr2ip1f

3 жыл бұрын

верстачок забавный, спору нет, но честно, я не придумал, для чего бы мне понадобился стол с двойной поверхностью. как верстак для сварки - пойдет, лишь бы ровный был, а вот для дерева сомнительно, мне не нравится щель по периметру, в нее будет легко улетать мелкий инструмент и детали. плохо, что конструкция не предусматривает разборки. петли, возможно, придется обслужить. хотя бы элементарно горелую смазку после приваривания поменять

Молодец красавчик руки золотые ⚒🔧🔨⚒⛏👍✋

Excellent craftsmanship. 👍

Very informative. Thank you.

Смотрел бы и смотрел, никогда бы не подумал, что под музыку, без визга болгарки, так залипательно смотриться 🤣 очень классное видео. 👍👍👍Ну и полезное, да

@varnavskynv

4 жыл бұрын

Полезного около нуля, столько геморроя и потерянного времени. На бумаге или картоне делаешь шаблоны, выкройки и работаешь. Как говорил мой учитель: те кто не умеет варить, работают болгаркой.

@alexandrmorozov8837

3 жыл бұрын

@@varnavskynv когда твой учитель тебе это говорил, на весь завод было четыре болгарки, и те пневмат( не ори про зачистные машинки)

@varnavskynv

3 жыл бұрын

@@alexandrmorozov8837 это не отменяет того, что Сварка это не прихватить, прислать, а хороший, качественный, красивый шов, в зачистке не нуждается. Сам по себе искусство.

@toufeekkhan4247

3 жыл бұрын

@@alexandrmorozov8837 gfdryuffh😭😭😭gdjjjjvv

Потому что, это более трудоёмкий способ получения неразъёмного соединения. Так можно сварить для себя. В производстве это экономически не выгодно.

@user-pm8ym3qi8y

3 жыл бұрын

Совершенно верно, можно себе четыре столба сделать с такими шишаками, а попробуй на заказ для забора, допустим, штук тридцать. За работу такую возливую денег захочешь, а выхлоп слабенький будет.

@finzdrav8646

3 жыл бұрын

Гууууд👍

Gracias por compartir tu tiempo y tu conocimiento es de gran ayuda para nosotros los soldadores Saludos desde Nicaragua Johnny Guardado. Felicidades

Very creative ideas, well done and thanks for sharing it with us 🙏🏼

Esto es a lo yo llamo un soldador detallista y con estilo profesional. Saludos desde Panamá 👍🇵🇦

@stereofiction

3 жыл бұрын

esto es una estupidez de una persona que no sabe lo que hace... nada mas... todo lo que hace NO es EFICIENTE y en cualquier empresa PROFESIONAL no le emplearian!

Gooooooooooood

@RajeshRajesh-sx5pe

3 жыл бұрын

@@tehnikmesin ,çcccccccccççccc

@albertodortahernandez8888

3 жыл бұрын

Muy bien

@ianhindley5173

3 жыл бұрын

Crap

@highclass3041

2 жыл бұрын

Muey BIEN Shitte!

My friend, you are the best! Receive my thanks for your valuable teachings and a sincere hug from this humble apprentice, from Brazil.

Excelente idea de la mesa!!! Genial.

Наконец-то секрет профильной трубы раскрыт! Больше сварщики не смогут его скрывать!!! 😂😂😂

@user-uk5tq8uq6b

9 ай бұрын

Колёса к столу приварил. Когда эти хлипкие колёсики накроются, придётся срезать. И зачем там вообще колёса? Ловить сто безконечно.

Ну вот, теперь я точно знаю, что все эти способы были оказывается Секретом. А я то наивный думал, что их знают почти все кто работает с металлом. ;)) Стол, кстати прикольный. Только немного не доделанный. Сторона с металлическим листом понятно для чего, а на обратную сторону нужно лист толстой фанеры прикрутить. Что бы закрывала профиль внутреннего стола. Для столярных и прочих работ. Тогда стол можно считать годным.

That is an awesome table I'm going to try to make one as well. Super cool

Good Job!!! Enjoyed the video!! Didn't have to put up with long-winded, meaningless talking, the guy just worked!! In process of building a welding table and just changed my plan to a turntable!!

Muito boa ideia para uma bancada de trabalho! Está de parabéns!

@rajajoshi184

Жыл бұрын

Yiyyy7yyytioAp a

Had to fast forward during the welding parts. I was unsure if I should wear a mask as well to protect my eyes.

Hey @Sergey / @Handicrafts, I loved the intro of the video, awesome. Very unique, sounds Dynamique, looks professional. Tips are quite general but presented in a cool way. Had to love it!!!

Thks for share your knowledge!!! 👌🏻

Cutting out two triangles and bending it to fit would've been faster

No vi el dobles donde se cortan barios ángulos Como el del fondo de video, al comenzar

@antonilatino626

4 жыл бұрын

No. Es dobles lo mismo pense es relleno con otra pieza cortada con simetría. Mal servicio es ay donde mejor me retiro

Very awesome work! Thanks for sharing. there is no one way of doing things!

Hi friend I want work with u U have extreme knowledge about fabrication and wood work u r awesome

Ok. I'm a welder. I don't have much time, so I'm just gonna teach you how to weld this secr...

one day this bloke might even learn how to weld lol

@aussiefarquit125

4 жыл бұрын

Rough aye

@kylealgie9101

4 жыл бұрын

Lol...

@tomt9543

3 жыл бұрын

I’m thinking that, where ever he’s from, you’re considered a welder as long as you use a claw hammer to do your metalwork.

Thank you for this video !! Keep them coming !!

@likegaming3529

3 жыл бұрын

្ុ៩ិោ

Excelente la idea del giro del tablero, muchas gracias

Honestly at this point I’d just take some sheet metal and make 2 cuts and weld it. That’s if I ever needed to weld a cap at the end of square tubing.

@MtnBadger

4 жыл бұрын

Ya, but if you're making a finished, designer-type piece, good info to have. Besides, he's just showing aays to work with square tubing. Which is good. :)

This video made me wish there was a playback speed higher than 2

@MegaLancet

3 жыл бұрын

Haha 🤣so I was right to make it 2x immediately

@touhidmahmud

3 жыл бұрын

Me too!

@faheembaig4475

3 жыл бұрын

Car bumper

@EOTG_AK

3 жыл бұрын

@@MegaLancet agreed, at least 2x improved the music...

Amigo muchas felicidades, que bien todos sus trabajos, son de mucha motivación, un saludo desde Sincelejo Sucre en COLOMBIA

Mis respetos , un profecional, si que se aprwnde viendo personas que saben su oficio , felicidades y gracias ppr compartir su conocimiento. Exelente mesa de trabajo.

There are better ways of doing these by far. And I get a chuckle every time one of these roll across my feed. I can't help but think "A grinder and paint will make me the welder I ain't"

@markusjohansson159

4 жыл бұрын

They suck at welding.

@MrAjjordan

4 жыл бұрын

@@markusjohansson159 And evidently finishing.

I watch a few of this guys videos. Interesting. But I got say I think he need to get a new pair of gloves. 😂

@iwilfix9407

4 жыл бұрын

They look broke in just right to me lol

i can do it’s cating to fitting, my work place Malaysia, good job😍

верстак зачетный, решение со столешницей, благодарю за идею, привет из СИБИРИ

Can you do this with round pipes?

@ericharris893

4 жыл бұрын

Yes but you would need a mitre saw not an angle grinder. I mean an angle grinder can work but you wouldn’t be straight on you would have to square the angles and fill gaps

@nameofthegame9664

4 жыл бұрын

Why on earth would ever want to do this to any pipe?

@williamwinder3466

4 жыл бұрын

@@ericharris893 They make a jig for cutting round stock properly so that their are no gaps

That’s so much extra work lol

@aliyavari6263

3 жыл бұрын

It’s good for KZread, I don’t think any welder do that even in lockdown when they have plenty of times 😁

@turbowank16v

2 жыл бұрын

Mmmmmmm it's tidy looking but.

Simply nice. Many thanks.. .

This video tutorials it helps my skill in welding more ticniques ,thanx for sharing

Eu: Hoje eu durmo cedo. KZread: não, vc vai assistir como cortar barras de ferro.

@douglaspaiva8841

3 жыл бұрын

kkkk

0:00 - 0:08 me preparing to make a sandwich

@AUNStoppy

3 жыл бұрын

My mom:Come set the table Me:

FELICITACIONES, muy buena trabajo.

Awesome informational educational video experience Y'alls God Bless Ya 🙏

Man who does their layout with a paint pen

@wolffirewalker9878

3 жыл бұрын

A moron that doesn't know a damn thing about welding ..lmfao😂🤣😂

@jakewesterfeld5960

3 жыл бұрын

​@@wolffirewalker9878

I'm a welder. Thought I'd learn something new today. Nothing here. Still looking. 😁🤣

@JohnDoe-xu6ky

4 жыл бұрын

Nice vid and music tho

@MtnBadger

4 жыл бұрын

So, maybe understand that not everyone watching this video is a fabricator/welder and ARE learning something? Don't like it, can't use it, move on. No need to slam the video. Even us old dogs can learn a thing or two, once in a while. I may not need a combo welding/wooden workbench to save space but.. I did get an idea for making a rotating grill/roaster on a "table" over a fire, old technique, new inspiration. It happens, one in a while. ;)

Una belleza de trabajo!!! 💖 Y en un video paso a paso y sin blablablá! Imágenes claras, precisas y concisas 💪🙄💖 Hermoso! Muchas gracias!! Like, suscrito y share por Dios!!

Awesome brother you are a true Steel Man a great skill thanks for sharing 👍👍👍👍🙏

LMAO!... *DISCLAIMER: NO WELDERS WERE HARMED OR QUERIED IN THE MAKING OF THIS BAKED POTATO....

Вот времена...... Обман, и главное креативно... Ещё в название надо было добавить DIY, и "жена увидела...." Печаль..... в настройках ставлю "никогда не предлагать видео с этого канала".

@user-rn2vs2sf6j

4 жыл бұрын

НУ НЕ НАРКОМАНИТ ЖЕ РЕБЕНОК И В РОТ ВСЯКУЮ ГАДОСТЬ НЕ ТАЩИТ УЖЕ ХОРОШО ЕСЛИ БЫ Я УМЕЛ Я БЫ ТОЖЕ ЕГО В БАН ВЕЧНЫЙ ЗАСУНУЛ

@constantinradulescu3842

4 жыл бұрын

What nu puteai sa scri in romana

@shopofmasters4371

4 жыл бұрын

Поддерживаю. А про какие настройки идёт речь?

@grajdanin_igrek

4 жыл бұрын

@@shopofmasters4371 Когда ютуб предлагает видео, сбоку картинки жмакаем, вываливается меню, жмакаем никогда не рекомендовать с этого канала.

@shopofmasters4371

4 жыл бұрын

@@grajdanin_igrek благодарю, буду применять. А то алгоритмы - такие алгоритмы

Thank you buddy, you 'r a great welder!

@noneyabusiness8376

3 жыл бұрын

No he's not. He's not even welding. He's tacking one after another until the seem is complete. That's not welding. 🤷‍♂️ A great welder wouldn't need grind his weld afterwards. And he would use a tig machine.

Bravo 👍👏👏👏👏👏👏 muy buen trabajo, saludos cordiales desde Chile 🇨🇱😷 y gracias por compartir su experiencia

@user-fv8ld4fj8s

3 жыл бұрын

Скачать музыку классическую происходит с 🙃🇺🇦🇮🇨😆😘😁🙃🙃😊🤪🙄😬😒🤤😴🤒🤕🙂😁🙂😆😘

Большой секрет для маленькой такой компании, в которой только автор видео!

@user-qg5mn7rf8f

4 жыл бұрын

Вот уж точно. С руками у мужика, слов нет, всё более, чем в порядке, но секрет, блин... явно, из арсенала того самого неуловимого Джо из анекдота :(

Why tf did you cut 45s on the first one and not just put them together it would have been so much easier

@NoTaboos

4 жыл бұрын

Also would have kept uniform cross-section, not pinched.

@ericharris893

4 жыл бұрын

nuclear explosion you could cut the 45•s and then use them on the inside corner for superior strength. Otherwise I could bang em together quick like you said

动手能力很不错，想法也很独特，感谢分享。

Excelente, saludos, abrazo.

First of all it takes to long. Second there way easier ways to it.

@FranciscoGonzalez-ro7ht

4 жыл бұрын

Well show your "easier ways" I wanna learn from the best.

@MannProperty

4 жыл бұрын

Franco Glez he is right this is pretty useless if you ever welded

@destroyer-fr4dz

4 жыл бұрын

@@FranciscoGonzalez-ro7ht easier way? Take 2 bars, cut one at an angle, then weld. Done.

@FranciscoGonzalez-ro7ht

4 жыл бұрын

@@destroyer-fr4dz got it, thank you.

@bob85099

4 жыл бұрын

So where's your KZread channel...??

Super, mais Les soudures sont tellement meulée, que c'est juste collé...

Saludos,y,felicidades, Muy,buena,,ideas Yo,estoy,,,aprendiendo, Gracias

Great ideas of steel works sir

Ни чего нового, бесполезный стол, ни понятно для каких целей перевертыш, если можно работать за сварочным крепким а не этой болтушкой, единственное удобно мусор сбрасывать

@rusrus1088

4 жыл бұрын

👍😂

@user-wb9om2kf3n

4 жыл бұрын

Или с размаху себе бестолковку снести

@user-fr4nj4ow6g

4 жыл бұрын

@@user-wb9om2kf3n неготивщики😛

good welders dont grind off welds

@nexus5033

4 жыл бұрын

depends on the job, some will have you grind it flush

@christownsend2399

4 жыл бұрын

This is true, but in my job all my welds have to be ground and polished flat, having said that I still endeavour to make all my runs as perfect as possible!

@nexus5033

4 жыл бұрын

@@christownsend2399 agreed, hurts grinding away some perfect times though

@christownsend2399

4 жыл бұрын

@exodia Totally agree mate 👍🏻

@keithsage7258

4 жыл бұрын

Great welders don't need to grind carbide welds ether..TIG welding on my bench too..

Sir thank you for a great video. Because you build it with basic hand tools those of us who haven't got a fabrication shop should be able to build our own. I'll build mine with glass and a vacuum between back and glass so it will work as an exposure table for screen printing on glass. After printing it must be fired in a kiln. I'm eager to build my own. Peace and long life. Rev. Joe Longstaff.

EXCELENTE VIDEO, SALUDOS.

Takes too long, bending a tube to fit works better in most situations, ect...

Yeah, i'd grind my welds too if they looked like that.

@lordbelvoir2543

4 жыл бұрын

Was thinking the pigeons had been around

@MrTitch37

3 жыл бұрын

yeah teflon weld it will stick to f all 🤣🤣

Alright, a very nice table, well done.