Seat LEON 1M 2001-2006 | Bi-Xenon HID projectors headlight Ugrade installation
Автокөліктер мен көлік құралдары
Seat LEON 1M, year 2001, 2002, 2003, 2004, 2005, 2006 bi- xenon projectors HID installation video
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.com/products/seat...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:00 I've heated the headlight already for about 14 minutes in de carton box with heat gun. Pull off the glass
0:09 Mount the Mini Gatling Gun shroud on the projector with the included screws
0:35 Mount the Mini H1 bi-xenon projectors in the reflector housing and don't forget the bi-xenon wires
0:42 Place the H7 centric ring and secure the projector with the nut.
1:10 We put some new (extra) butyl in the eaches to be sure it's water proof
1:24 Don't forget to clean all parts inside, and press the glass back on the housing, before you putting it back in the box for about 14 minutes
1:49 Press the clips back on the glass to hold it on his place
2:19 Here we use cable clamps for the high beam splitter, but now we've got new H1 splitters available
2:53 Drill a (22mm) hole in the cap for the wires
3:18 Place the bulb in the projector, secure it with the spring and connect the black /red wires to the original H7 plug
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Seat LEON 1M (2001 - 2006)
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retrofitlab/
Instagram: / retrofitlab.com_official
Our website: www.retrofitlab.com/
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Seat #Leon-1M #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement
Пікірлер: 86
Perfect work, looks awsone!
elegancko świeci:D
Brilliant video, the results look amazing. Really want to do this mod myself on my mk1 leon cupra but I was wondering what exactly you used in the video like which wiring harness and shroud etc. Thank you.
Was looking at the link for my Leon 1M (2001) but it doesn't have the exact kit. What are the exact parts needed for bi-xenon? It has H7 for low beam and H1 for high beam
Is there any way to continue using H7 in short with the projector and H1 in long? I would be interested in continuing to use both lights as they come from the factory but using the projector with the short lights
Are the high beams in line with the projector light? Because I'd installed one kit on my 2002 toledo, and the high beam in the distance is aiming at the trees :D
I'd like to know which oem projector is equal to Mini H1 .For example 320 E90 bixenon and mini cooper not worthy .
estos faros cuentan con los motores originales para regular la luz?
why the projector have cable?? where you connect it? thanks
hello.... Are the installation wires that connect to the plug specific? Is it possible to buy from any store? Do you have a specific name? thank's for video men 👍
@retrofitlab. One Question does the 2.5 fits too? thank you
@nickmo1997
7 жыл бұрын
okay thank you ! so i try it... Hope it look good :)
Notice that these are Depo (or TYC) aftermarket headlights. OEM Valeo headlights are sealed with TOUGH permaseal which couldn't be opened that easy.
@qba1012
5 жыл бұрын
I have same problem :(
@innoticbeats2211
5 жыл бұрын
@@qba1012 I think it's nearly impossible to do this...
@SamFisherK
9 ай бұрын
Well then for the last resort you could cut it around with a dremel and reseal it...
@innoticbeats2211
9 ай бұрын
@@SamFisherKI just noticing some inaccuracies of this "tutorial" dude. It may be misleading for owners with oem Valeo headlights keen on doing this.
Will the beam be accurate after installation?
@DannyM9348
8 жыл бұрын
Brilliant! Thanks very much!
is this legal over UK?
i have seat leon 1 and i want install it but i can install it with h7 halogen bubls ? becouse low and high bulb are seoarated ?? thank you
@CryptoCroko
7 жыл бұрын
Retrofitlab ooooohhh okay okay thanks man💪
Does anyone know how to remove the headlight from the car itself
@SamFisherK
9 ай бұрын
You have to remove the bumper first to get access to two bolts that holds the headlight underneath.
Which butyl band would you recommend for doing headlight jobs, like this one? :)
@filmfreaken
7 жыл бұрын
How many mm is it, a 6mm band? :) I dont see any specs, and i live in the other end of the world, otherwise i would order from you
@filmfreaken
7 жыл бұрын
Thank you very much!
Very go mi friend
@pedrotwodi2833
9 жыл бұрын
No ablas español??
@pedrotwodi2833
9 жыл бұрын
Brother Como Se llama el plastic what USAS para pegarlos deapues of cerrarlos
Can you please show how it looks when the lights are switched on.
@sufm96
9 жыл бұрын
***** Ok
What's the Price of this configuration for two 1m headlights? I'am from Germany. Is it possible to send this ones to you and of course back to me?
1:10 - What kind of gasket you use, what is the name of this product and where I could buy it??
@pawelgalecki94
8 жыл бұрын
+Retrofitlab thank you :)
Is it possible to fit a second projector on the inside of the headlight unit. And if so do you have to open up the hole?
@Retrofitlab
4 жыл бұрын
Perhaps, but I am not sure how much space there is in the high beam reflector. Perhaps Aharon Matchbox projector would fit: www.retrofitlab.com/en/xenon-projectors-1/aharon-matchbox-bi-xenon-h1-projectors-5.html
@AcousticFool
4 жыл бұрын
@@Retrofitlab Thank you for the reply, just one more question. When you use the H1 splitter to take power from the old h1 high-beam bulb to power the high beam motor for the h7 bi-xenon, is it still safe to use the original h1 live to keep the original h1 powered as well?
@Retrofitlab
4 жыл бұрын
@@AcousticFool Yes that is no problem! :)
Do you guys ship it to finland? is it even available anymore?
@viljonkka3161
6 жыл бұрын
Okay, big thanks!
what is the name of the red cable with which he connected the dilak lights to the projector
@Retrofitlab
Жыл бұрын
There is a connection to the projector for the bi-xenon mechanism which connects to the solenoid and one to the bulb.
w taki typ soczewki pasuje zwykła żarówka h1?
@Retrofitlab
4 жыл бұрын
Yes, H1 bulbs will fit :)
Este faro podría realizar cualquier Inspección Técnica anual de forma favorable??
@adytutealca73
5 жыл бұрын
No lo se tio, mo creo
Atest 8SD is missing :-(
When installed do they need to be adjusted and if so how?
@Retrofitlab
5 жыл бұрын
Yes, they will need to be adjusted to be level. This can be done by a level line on a wall for example.
@ryanpithers4127
5 жыл бұрын
Thanksss
Hello , the diameter of projector is 2,5 or 3 inch ??? Thanks
@CryptoCroko
7 жыл бұрын
Retrofitlab ahh okay Thank you very much 💪👌👌
Hola me podrías decir dónde comprar lo que es la lupa para ponerla en el mío?
@Retrofitlab
3 жыл бұрын
Hi, you can buy the set here: www.retrofitlab.com/en/xenon-projector-kit/mini-h1-twin-kit-bi-xenon-projector-kit.html
Hello ! I want to know about lens marks pls tell me !!
@ahmetcangungor
8 жыл бұрын
+Retrofitlab what is the brand of this lens? I am looking about easy install and use all bulbs type lens
I would be very happy if you show the light output...and light throw in night..
@Retrofitlab
4 жыл бұрын
Please see the product pictures for the light output; www.retrofitlab.com/en/aharon-mini-h1-ultimo-bi-xenon-projectors-1.html
What size of the projector? I have the same headlight
@Retrofitlab
5 жыл бұрын
www.retrofitlab.com/en/seat-leon-1m-1999-2006-bi-xenon-mh1-halogen-headlights.html
¿Donde puedo conseguir las grapas metálicas que sujetan la tulipa al faro?
@Retrofitlab
Жыл бұрын
No los vendemos, lo sentimos. ¿Quizás en Ebay?
Leon mk1.... 3" or 2.5" projectors?
@UNSEENMONSTER
9 жыл бұрын
Thanks! :D Sir ! . 3 inch can fit?
@UNSEENMONSTER
9 жыл бұрын
Thanks!
@nickmo1997
7 жыл бұрын
hi
the projectors are Angel Eys?
@laszlo_kovacs
2 жыл бұрын
No, but f it's still relevant you can fit it into the Tuning tec angel eye headlight
Hola hay que homologar para pasar la itv?
@Retrofitlab
2 жыл бұрын
Lo sentimos, el kit no tiene E-mark.
Alguien me puede indicar los grados °C para una pistola de calor(decapadora)? El video sólo muestra los minutos aplicados (14min) Gracias!
@Retrofitlab
5 жыл бұрын
Usamos la configuración 1ª / más baja, que es de alrededor de 300 grados centígrados. Por favor tenga cuidado y use una temperatura baja, mejor prevenir que lamentar ...
@Rai_Rafali
5 жыл бұрын
@@Retrofitlab Ok. alrededor de 300°C. Una vez me ponta en ello, iré comprobando cada ciertos minutos para no tener que lamentar. Gracias por la aclaración.
@Retrofitlab
5 жыл бұрын
@@Rai_Rafali Sí, la caja de cartón no está muy aislada, por lo que la temperatura en la caja será un poco más baja. Cuando se calienta en un horno, la temperatura puede ser más baja. Y sí, buena idea vigilarlo :-)
@Rai_Rafali
5 жыл бұрын
@@Retrofitlab gracias, tendré sumamente cuidado!👍
High beam splitter name at min 2:19 please!
@thejoseandresshow
8 жыл бұрын
+Retrofitlab Hey but those splitters appear to be completely different in Retrofitlab.com! :(
Where is the ballast and igniter???
@Retrofitlab
5 жыл бұрын
The Aharon ballast is mounted near the headlight.
This is 2.5 '' or 3.0 '' ?
@Retrofitlab
2 жыл бұрын
In this video the Mini H1 projector is installed. This projector has a 2.5 inch lens. We recently developed a kit for this headlight with a 2.5 inch LED projector: retrofitlab.com/products/seat-leon-1m-1999-2006-bi-led-halogen-headlights?_pos=6&_sid=350e31433&_ss=r
Absolutely illegal in Germany :/ You will need an automated luminous range control and a headlight washing system for it to be legal. There is one set out there that is legal in Germany, but that one costs over 1.000€...
@xXYannuschXx
8 жыл бұрын
***** In some cases overly strict. You can loose your insurance when you install a non-legal air-filter...
Price?
@Retrofitlab
3 жыл бұрын
Check it out here :-); www.retrofitlab.com/en/seat-leon-1m-1999-2006-bi-xenon-mh1-halogen-headlights.html