Damn, super cool stuff man. I was nervous the whole time that the tube would explode on you, ha

@Saghetti

6 жыл бұрын

I found you, NileRed!

@Scotty-vs4lf

6 жыл бұрын

well, me know it didnt cuz the video got uploaded

@Scotty-vs4lf

6 жыл бұрын

also, i like your channel man

@michaelbaerga8932

6 жыл бұрын

Id be more nervous about the Co2

@Cameron_Mind

6 жыл бұрын

NileRed my favorite people together xD

Whoa, Cody did a Whippet on his channel. Nice!

@logandellow4041

7 жыл бұрын

yes someone who gets this

@GlutenEruption

7 жыл бұрын

Lol. I laughed maniacally at that.

@terrydavis8451

7 жыл бұрын

TheMontanaDave Ya know for science! giggle giggle waaawaaawaaawaaa

@imdrunken

7 жыл бұрын

TheMontanaDave wahhh wahhh wahhh , and a few less brain cells later and you've successfully done a whippit

@Falcodrin

7 жыл бұрын

+trevor pierce actually nitrous oxide is an extremely safe inhalant

8:42 "If it doesn't explode, then it's probably good." Spoken like a true scientist xD

Just rewatched now and you mentioning grant Thompson hit me hard

@kaidenl9402

4 жыл бұрын

Same

@redcastlefan

4 жыл бұрын

Its so surreal, I remember the first video of him I saw. It was him making slime. But to younger me, it was magic. He has been a large part of my life and it pains me every time I remember he's no longer with us. His death truly feels like I have lost a loved one. He was more than just a content creator to many of us, he was family. We miss you Grant. RIP :(

@GRBtutorials

4 жыл бұрын

Nokia First for me was the spot welder (I think, it was a long time ago). I loved those good old project videos!

@i_love_python5862

4 жыл бұрын

@@GRBtutorials me too

@nobeltnium

4 жыл бұрын

@@redcastlefan holy cow i have no idea that he's dead until i read this

Cody should've been in KZread Rewind

@benjaminprendergast2133

7 жыл бұрын

Dank Meme. I agree.

@DamianReloaded

7 жыл бұрын

peopel very likely pay to be in them...

@chbrules

7 жыл бұрын

No, YT Rewind is just pop media cancer. Cody is way above that trash.

@cookiemug8018

7 жыл бұрын

chbrules Cody is way better than that

@OvAeons

7 жыл бұрын

Highschool popularity pissing contest, Cody deserves better :)

When you make the seals, try to make them as round as possible, (e.g. test tube like bottom) not a pointy tip, and they will be stronger at high pressure. On the first seal gather some extra glass and while still hot blow into the open end to produce a smooth rounded bottom. Of course you cannot do this with the final seal, but make every effort to make it rounded, not pointy. Also, even though Pyrex has a low thermal expansion it will still develop stresses as it cool. To minimize this, after you make the seal, you should flame anneal by heating the seal in a cooler flame. On a butane torch this can be done by restricting (not totally) the air inlets to produce a yellow carbon rich flame. The idea is to uniformly heat the sealed area below the softening point of the glass to relieve the stresses. Then immediately bury your seal glass in some vermiculite so the glass cools slowly. This will (can) make a better result and stronger seal. That said, I am impressed with your 700+ psi ampules. Cheers, Mark Old Lab Glassblower *******************************************

@TheBlapSurgeon

7 жыл бұрын

Mark Beeunas owo

@dougetrillbe3174

7 жыл бұрын

+

@XxtrashcanXx

7 жыл бұрын

please don't call borosilicate glass pyrex. Pyrex is a brand and not all Pyrex is borosilicate. The misnomer can be quite dangerous if somebody heats shocks non thermal resistance pyrex

@XxtrashcanXx

7 жыл бұрын

the lab glass is boro but it would be bad if someone thought that the kitchenware was. to make matters worse before a certain date the kitchenware was borosillicate.

@markbell9742

7 жыл бұрын

Life was once so simple!

Holy crap that a lot of N2O. You're gonna see Cody filling balloons out of the trunk of his car at the next festival that comes around

@michaelfixedsys7463

5 жыл бұрын

N2O balloons would actually be pretty neat. fun and educational for the kids

@martynaskerdokas8438

5 жыл бұрын

Michael Fixedsys i would take one and get high

@toafloast1883

5 жыл бұрын

@@martynaskerdokas8438 me to i get high on n2o ballons... for sience!

@austins.3313

4 жыл бұрын

@@martynaskerdokas8438 no shit

@unknowunknown9096

3 жыл бұрын

No2

Cody, you know what I love about your channel? Not only is it your detailed educational content throughout your videos and the pure entertainment of watching chemistry experiments that aren't boring, but you didn't sell out and go with an over-produced, I'm cool, YT channel. It's just pure chemistry from a dude living out in the country, just being the true Cody. Much respect man. Great job all around.

Cody, a tip from a former borosilicate lamp worker: heat below where you want it to seal so it melts inwards and is thicker and able to withstand higher pressures. the way you showed yourself sealing it left a very thin seal. also the slower the temperature rise and cool the stronger the crystal structure. heat the top few inches to a couple hundred degrees and then seal above it and coat it with carbon from the torch to help slow it's cool.

@andybaldman

2 жыл бұрын

He didn’t listen.

@asmolbean9300

2 жыл бұрын

Good tips

I think supercritical oxygen would be fascinating, its magnetic properties in the glass vial would be there at room temperature.

Cody straight got high on cam while explaining nitrous! LOL

It is doubtful that finding a new channel has ever brought so much joy! You are a superb human and I’m so glad I’ve learned of your existence!

I think this is the earliest I ever got to a codys lab video (no views)

@notsurejr4957

7 жыл бұрын

Dustin M you haven't watched the video.

@dustinm2717

7 жыл бұрын

no views 4 likes... I think KZread derped again.

@dustinm2717

7 жыл бұрын

Notsure JR I know I haven't I was just commenting on that this was the earliest I ever got to a video

@Silent626gator

7 жыл бұрын

Dustin M Same, I've never been this early

@spinningfreshbeats

7 жыл бұрын

same

Great video as usual Cody!

@DaffyDaffyDaffy33322

7 жыл бұрын

Hey keystone! :D

@KeystoneScience

7 жыл бұрын

+DaffyDaffyDaffy33322 hi :D

@rowannadon7668

7 жыл бұрын

hey!

@petergray6867

7 жыл бұрын

Keystone Science you rock i still say that you guys should do a colab

@KeystoneScience

7 жыл бұрын

+Potatowarrior 13 hello :D

Cody, I really appreciate how you actually explain the chemistry and the science behind what you do on your channel. A lot of channels that do "science" experiments never explain what is actually going on at a molecular level or why their reactions are taking place. Thanks for what you do. Its awesome!

Wow, this time you really explained it all thoroughly! the chemistry, how to do it practically, even the failures and how to overcome them. I wish you did that in every video!

Cody, was this just an excuse to do whippets on youtube

@theCodyReeder

7 жыл бұрын

I did it because I new the comments would be full of people asking me to do it and I figured If I was I would show how dense gasses lower voice.

@bruhmomento2757

7 жыл бұрын

Cody'sLab you spelled knew wrong

@bruhmomento2757

7 жыл бұрын

Cody'sLab and I'm guessing at the end you meant volume 

@cloroxbleach197

7 жыл бұрын

Brett Butler Spelt*

@Jbrowni3

6 жыл бұрын

ha right lol

I see that your lab is outside, 10/10 for ventilation, nice

This guy is absolutely brilliant and so completely humble. Can't even begin to imagine what he'll accomplish in his lifetime.

Keystone science, Nilered and Cody all being amazed at gasses in glass. This is truly the sight of the century.

You could also wet sand the acrylic with a fine grid if you want that perfectly square "scientific" look, instead of dipping it in more acrylic. Just get a nice flat surface to sand on. You should do an failure test with the acrylic encased tube.

@sleeptyper

7 жыл бұрын

He can also flamepolish the ground surface for perfect finish.

@SeanHodgins

7 жыл бұрын

Oh yes, that is another way.

@DanBowkley

7 жыл бұрын

SeanHodgins That's what I was going to suggest, start off with some 80 grit and just keep going finer and finer. 10,000 grit should have it looking like glass. Speaking of glass, a flat sheet of fairly thick glass would make a good base for the sanding. Lay a sheet of sandpaper on the glass, get it nice and wet, and just rub the acrylic around on it. Rinse and repeat.

@amsterdamob

7 жыл бұрын

submerging in a bath of acetone is how acrylic polishing is done commercially (screwdriver handles, etc).

@tee4222

5 жыл бұрын

I’d think a quick dip or flame polishing would be a lot easier and less time consuming than progressively sanding finer and finer

Cody got a little "light" from that balloon, we see the cut Cody ;) Great video

@xanri7673

5 жыл бұрын

What time?

@dea9098

5 жыл бұрын

@@xanri7673 5:10

@king_isa1993

5 жыл бұрын

Finally found you

Cody, your love of learning and experimentation is absolutely wonderful to see. Thank you.

Excellent! I have a tiny capillary with xenon which does its thing at around 15C but yours are much more impressive. You've done the hard yards and reaped the rewards!

Hey Cody, I am hoping for a follow-up video! I'd love to see the process of the clean up. Also, Do you have any tips for a student applying to the U. I applied for next term, and I am curious as to what the environment is like? Thanks, Harry

@theCodyReeder

7 жыл бұрын

they like good test scores.

@bigboibunz

7 жыл бұрын

Well that's good. Thanks for the reply!

@KeystoneScience

7 жыл бұрын

Wow awesome! I also applied there so ( for next fall ) :D what are you planning on majoring in ?

@bigboibunz

7 жыл бұрын

Metallurgical Engineering, what about you?

@KeystoneScience

7 жыл бұрын

+Harry McLane I'm thinking electrical engineering, as well as physics

I can't believe the glass tube didn't shatter when half of it was dipped in ice and the other half being heated by a blow torch.

@ValCronin

7 жыл бұрын

So the acrylic casing is for display purposes? No intent of using the gases in the future? Purely for viewing/possessing pleasure?

@theCodyReeder

7 жыл бұрын

pretty much

@Bormann28

7 жыл бұрын

If the glass does explode inside the acrylic, will the acrylic casing not act as a bomb of sorts? Or is it strong enough to withstand the pressure?

@587180

7 жыл бұрын

Bormann28 its probably noy going to explode considering the tube held up very well. And also adding like an inch of acrylic

@eformance

7 жыл бұрын

The thermal conductivity of borosilicate glass is very very low. Thermal conductivity coupled with the fact he was heating annealed glass, is what allowed him to do this. When the glass is annealed, all of the stresses are removed, so there were no internal stresses to release and the thermal conductivity prevented the heat from traveling down the glass and creating thermal stresses.

I love this! I'm in Chemical Engineering and phase changes are a huge deal, but we don't get to see a lot of high pressure phase changes in a hands on environment. I like that you've figured out how to actually make this stuff work on the small scale.

5:09 never thought I'd see cody doing whippets live on youtube 🤣

your channel is growing so fast! And you deserve it, these videos are amazing! You're the first person on youtube I've seen who's used science to make fun projects and thats amazing.

@nealdesai8779

7 жыл бұрын

p.s. hope your cut feels better

Hey Cody, just a heads up, it's usually better to not wear gloves when working with glass. If molten or hot glass gets on your hand, you get a tiny burn and it bounces off. If molten or hot glass gets in your glove, it is much, much worse. When I torch, I wear a leather smock and sodium-flair goggles, but no other equipment.

Every video I watch of yours Cody your very optimistic. Every time you make a small mistake you don't really beat your self up much, at least not out loud

this is dealing with questions I have had for a long time but was unable to find a source of data on...so at last my curiosity is at least partly satisfied....very interesting stuff..love it

Cody, you should send those acrylic tubes to Peter Brown (see KZread) to have them turned down into polished cylinders. Would be a cool collaboration across channel genres.

@JBoyle-jr9wb

7 жыл бұрын

ohmynoun Peter Brown was the first person I thought of when I say the acrylic encased tubes. They could create some pretty cool chemistry style lab/office/home decorations.

@JesseCombsTwiZtedCheese

3 жыл бұрын

I'm worried that turning these tubes on a lathe would be very dangerous.

@BluecoreG

3 жыл бұрын

Lol I hope you don't mean ship a bom in the mail

If someone ever tries to rob you, just throw your collection of gasses at them.

@justinlabarge8178

7 жыл бұрын

Okay this was before you out them in acrylic

we need Science teachers like him. I mean ones who are passionate about the knowledge they have and want to pursue more. I love this channel. Always in awe of what he does.

Happend to watch right to the end. You have an amazing attitude towards failure and injury. I wish I had an ounce of that objective reaction.

5:08 You basically get high from inhaling Nitrous Oxide. I think Cody had to cut for a second because of it

@ABitOfTheUniverse

7 жыл бұрын

Could definitely see the effects hitting him after he exhaled. I imagine describing what he was feeling during the cut between 5:25 and 5:26 wasn't worth keeping in. Probably just him saying "Woah! That was weird. I feel strange..." or some such thing.

@chrisgrant2877

7 жыл бұрын

影 Productions you're wrong, you certainly do get high from nitrous. You seem to not understand what being "high" means. Applies to all psychoactive substances. And yes, nitrous does impair physical and cognitive effects. Go take a whippet and see for yourself or Google it.

@ABitOfTheUniverse

7 жыл бұрын

***** You're assuming too much from two sentences. You say "I am using the meaning..." did it ever occur to you to ask Sw4y what meaning he was using? In short, you lost, and now you're just digging your own grave so deep you hope to pop out the other side of the Earth, reborn. Good luck with that. Spoiler: It doesn't work. You were wrong from the start. Reread your initial reaction, reconsider Sw4y's words the same way you tried to defend your own, in light of Chris Grant's comment, consider apologizing for being rude (your choice whether you do or not), but then, *move on.* You've made assumption after assumption and you're only making an ass of yourself in the process.

@cullenl2508

7 жыл бұрын

Chris Grant I don't know I've recently had a filling and the nitrous didn't seem to affect me. also the pain was very noticible

@chrisgrant2877

7 жыл бұрын

***** Yeah you're not going to feel high on it at the dentist. Cody did roughly half a balloon. Recreationally that will get you high. Nitrous is a dissociative and certainly does impair cognitive and physical effects. His use of high only implied that the nitrous changed Cody's state from sober which it did. Just because you don't describe a feeling as "high" doesn't make it that way.

Badass nerds. It's a new phrase that fits you perfectly.

@kkkkk12122323232

7 жыл бұрын

Elijah Till

@M0053yfate

7 жыл бұрын

Booking Books

@elijahtill7734

7 жыл бұрын

Y u do dis 2 me?

@j574

7 жыл бұрын

M0053yfate

@elijahtill7734

7 жыл бұрын

Attack Helicopter

Your Audio is amazing Cody. I'm so happy people with money like you as much as I do.

you are my new fav channel. your excitement for stuff is amazing! never stop being curious!

I'd like to see you test one or more of those acrylic-covered ampules to destruction (safely). On the one hand, it would be a potentially neat video. On the other hand, if you're going to store them, it seems to make sense to understand what happens if they fail. For example, if the acrylic doesn't shatter outright, does that mean it might develop one hole or crack and then rocket about in one piece? And, if so, us there enough store energy for it to cause significant damage?

@theCodyReeder

7 жыл бұрын

I agree, I'll make an extra one on the next batch and destroy it.

@TheLocust830

7 жыл бұрын

Send one to Hydraulic Press Channel please! It looks very dangerous and must be dealt with.

@A-Star0218

7 жыл бұрын

this is actually an awesome way to store gasses... would be interesting to collect a sample of every element stable enough to deal with in a periodic table shaped acrylic block

@frostchain2362

7 жыл бұрын

I'm not sure about acrylic blocks but there are definitely element collectors out there.

@wupme

6 жыл бұрын

really there are element collectors out there? You are not making this up?........

Can you use those tubes to make a thermometer and tell room temp based on which one is liquid?

@ElizabethGreene

7 жыл бұрын

Yes, you could!

@thetraitor3852

7 жыл бұрын

Nope. they are too thick.

I love that you can see exactly when the n2o starts hitting you as you try to explain stuff, I wish i had a huge can of the stuff!

Codysblab is a modern educational channel. One truly without bias and genuine intent to entertain and inform.

I miss-read that as "gassing seals in tube"

@Brokenrocktail

6 жыл бұрын

Zaster lp that must be the only source of down votes on this video lol

@fandomsunited7236

4 жыл бұрын

I read Glasses sealed in tube......I should put my glasses back on

Incredible how that borosilicate glass tube could tolerate such a temperature differential. One end in liquid nitrogen, while the other end is being heated with a torch only a few inches from the very cold lower portion. I'd be afraid to handle that tube. Even though you waited before removing it from the water, there's always a chance it can still explode. Risky.

@user-yp2ki7rq2s

3 жыл бұрын

I want a pipe or crystal, can you help me with my private post and communicate

@jarringprism494

2 жыл бұрын

@@user-yp2ki7rq2s wtf are you talking about

One of the coolest, if not THE coolest gas video you have done to date. Really awesome stuff. I really enjoyed!

This might be my favorite video of all, Cody. Really REALLY cool.

I saw N2O on the thumbnail and just thought "he's gonna breath that in 'for science'"

@cullenl2508

7 жыл бұрын

Steven D. nice proper use of punctuation

I love your channel so much i actually turn off add block when i watch you!!!

Dear Mr. Cody sir, this was most enjoyable. I truly learn much from you. Thank you. pierre from New Mexico

This collection is something I would enjoy seeing updates on from time to time.

favorite channel. thanks cody

"yes, laughing gas" me: breath it all in

I've been watching a lot of hands-on chemistry videos lately. I have to say that Cody's are the best. He just feels more relateable than the really sterile lab-setting videos. I've been so inspired to start learning more and trying my own (safe) home lab experiments.

@K0ester

10 ай бұрын

Still doing home chemistry? Did you get an amateur lab setup? I started when I found codys channel years ago. Slowly started buying glassware, hotplates, stirrers, chemicals, etc. Ive got quite the collection going myself

@Shnugs

10 ай бұрын

@@K0ester Wish I could say I followed through with this. I remember leaving this comment years ago. I never had the money to start anywhere meaningful. I ended up directly my creative urges into programming since that is mostly an exercise of the mind (where I don't need to pay for materials besides a shitty laptop one time). I never circled back around to it. Glad that folks are still finding inspiration from Cody though!

@K0ester

10 ай бұрын

@@Shnugs hey, I get it. I would have never had the lab I have now if I didnt suddenly come Into about 14,000 USD at the right time. Im pretty jealous, I tried to get into programming and coding a while ago now. Never took it serious enough. Now I know nothing. I have put together quite a bit of general computer knowledge that helps me in my life, but never got the programming or coding down. I wish I did. How that going then? Make a job out of it or just a hobby?

Hey Cody good to see you back at it.

Just looked it up. That combination of elements in your intro is, in order: Cobalt; Dysprosium; Sulfur; Lanthanum; Boron.

@lavendermachine

7 жыл бұрын

omg hi silence! long time no see!

@stoopidhaters

7 жыл бұрын

Co Dy S La B, wow I did not realize that, thanks for bringing that up :)

@metrabyte1282

7 жыл бұрын

I thought it was just bad handwriting lol

I love your content but I would love to see more episodes of the mine series

@treakfly

7 жыл бұрын

Grandpa Ketsis me/2

@LeonBoniface

7 жыл бұрын

me2 m9, me2

I'm glad I watched the video you did with grant. It introduced me to your channel. Very nice videos, goes to show that chemistry is a lot more interesting that what you have to learn in high school.

I like you the most out of everyone on youtube, because you stay yourself even with almost 1 million subscribers

10,080 likes, 39 dislikes. Best ratio ive seen before.

@JaYf7709

6 жыл бұрын

its still pretty good 1 year later. 17400 and 98. one of the best channels on the tube

@bazuka1337

6 жыл бұрын

Yeah because it's Cody. You think people with a bit of brain could dislike Cody's videos?

@jmendoza6661

6 жыл бұрын

Not possible. Cody rocks .

@bazuka1337

6 жыл бұрын

Jesse Mendoza exactly!

@jaysonhahn5881

5 жыл бұрын

Cody has the type of personality you just cant dislike. He's such a likable person, and his videos are great.

Holly fuck Cody, I was here when you had less than 10k subs... now you are almost 900k ! Congrats man!

I think that "Project Pokemon" would be a good name for your gas collection project.

@caseythimm5522

7 жыл бұрын

That name comes from the KZread channel Ethoslab. He tasked himself with collecting one of every kind of Minecraft villager and he named it Project Pokemon.

this is by far one of the coolest setups i have ever seen, watching gases phase in and out of critical is by far my favorite chemistry experiment. i may one day have to copy this. another gas you might try is some of the canned air gases, i did a fun little experiment with those once using a 1 liter soda bottle... the warm water caused the cap to soften and become disengaged from the threads... it made for a really impressive rocket and a lot of atomized water. but there are a handful of different gases used, plenty of room for experiments and relatively easy to use.

Omg your so close to a million! You can do it!

Comes out unharmed after drinking cyanide, dipping his hand in mercury, biting sodium, sealing gases under pressure in homemade glass ampules and more... But almost dies trying to hang up an axle stand..

@MattOGormanSmith

7 жыл бұрын

Pierre Curie was hit by a bus. That is not the story we were led to believe in school.

@terrenmaplethorpe4001

6 жыл бұрын

His greatest weakness is butter

@absinthe7266

5 жыл бұрын

And gets nearly annihilated by a stick of butter

This is one of the coolest videos you've done in a while Cody. Keep it up!

This is so cool! I don't know much about science but it's so awesome watching someone who does! Great video as always Cody!

Did I miss the step where he purged the atmosphere from the ampoule?

@theCodyReeder

7 жыл бұрын

I figured you didn't want to hear the glass on glass screeching again.

@Sup3rman1c

7 жыл бұрын

Nope, its just a combination of atmosphere and gases, in which the atmosphere is only a small portion of.

@aeroscience9834

6 жыл бұрын

Cody'sLab I did

do a face reveal at 1M subs

@TheBlapSurgeon

7 жыл бұрын

Builderman514 nah dude, I want a face reveal too!

@TheBlapSurgeon

7 жыл бұрын

Builderman514 nah dude, I want a face reveal too!

@extrememercilesspotatochip9431

7 жыл бұрын

frfr i wanna know what inteligence and knowledge looks like

@EddieBurke

7 жыл бұрын

Dick reveal at 10 billion on my channel ecks dee

I love how much hard work you put into your videos Cody, keep it up man

This is by far the best science experiment I’ve seen on KZread. I’ve probably seen thousands 😂😂

We need a colab with Shop TIme!!! I'm sure peter can help you make perfectly cast samples!

@Keronin

7 жыл бұрын

This. I came to the comment section to see if anyone else had mentioned Peter. Although Cody already has decent casts, he really could use the advice of Peter in terms of finishing the surface of the Acrylic.

@gromann

7 жыл бұрын

King Kasper the best way to shine acrylic isn't to dip cast as he did - it's to wet sand then torch it with a cool flame. It causes the outermost section of material to level out. It's how aquarium makers get acrylic material crystal clarity for that 98 percent light transmission.

@kingkasper4950

7 жыл бұрын

gromann Funny enough I am aware of that fact for the same aquarium based reason hahaha The point of the pose was in hopes that Cody saw it and hit up Peter from Shoptime. 1: He knows his stuff! and 2:I follow and enjoy both channels and i love colabs between science channels! [Shwood on The King of Random made my fucking day every time!!]

What happened to the mine videos? I really enjoyed those.

@ReasonablyscaredCat

7 жыл бұрын

Winter? So he doesn't want to do them? Or maybe some other complications...like a cat...

@mudkiptyler

7 жыл бұрын

Cat? What cat? What cat?

@kyleahoff

7 жыл бұрын

Utah is cold right now!

@ReasonablyscaredCat

7 жыл бұрын

mudkiptyler you know the cat that was in his mining video it had broken paw you could see it in. his foot

@shedokan

7 жыл бұрын

Didn't you see the video where he found that the gold mine was not profitable?

Great channel. Always cool to see a passionate backyard scienctist...with a very large yard.

*Breathes in an anesthetic while standing up to demonstrate the density* Cody you're the man lol

Hey Cody - When cutting/sealing the tubes, I wonder if (delicately)chucking the glass tube in a cordless screwdriver (or any motor driven apparatus and using that to rotate it at the desired speed would help

@theCodyReeder

7 жыл бұрын

that is actually a pretty good idea! I'll have to try it sometime

Why not put the acrilic in a vacuum chamber to degas and increase the clarity?

@draftelite6770

7 жыл бұрын

Bike Jake I second this!

@evanhart709

7 жыл бұрын

Probably because of the pressure differential it would create with the hundreds of, if not thousand+ PSI contained in the tube ;)

@peterwilbrink718

7 жыл бұрын

If the tubes can handle the hot water which greatly increases the pressure inside it then they can handle an additional 1 atm as well.. Or am I missing something?

@ElizabethGreene

7 жыл бұрын

It looks like this video was at the city house, instead of out at his parent's place where the vacuum chamber lives. ...hmm, that sounds a little stalkery.

@evanhart709

7 жыл бұрын

Y'all are right. Just a brainfart over here.

Thats awesome you did a whip it in the middle of your video and still kept it together pretty well. nice one

Hey Cody, I just wanted to say I am highly amazed with your intelligence and am extremely jealous of your knowledge!

With the scrap glass you have you should make prince ruperts drop and do you have a source of cheap glass tubes

Cody, in the future get a speaker that is capable of playing a bass heavy beat, then while the acrylic is drying place it ontop of a board on the speaker and play the music, it will remove the bubbles for u and make it clear

@theCodyReeder

7 жыл бұрын

Ah I like that idea!

@alienmechanic8696

7 жыл бұрын

Cody'sLab thats really interesting stuff you have going on there, i'm wondering how much pressure it would take to hold liquid nitrogen at room temperature?

7 жыл бұрын

Or just degas the acrylic in the vacuum chamber before pouring it? If the glass can handle the pressure difference then all of it can be cured in the vacuum chamber as well.

@imagzz4942

7 жыл бұрын

+Alien Mechanic It takes no pressure. Liquid nitrogen is liquid at room temperature. Although i'm guessing you meant gas. Remember that it's not actually called "liquid nitrogen", it's just nitrogen.

YO CODY THE MIC IS DOPE THIS SOUND QUALITY IS DIVINE

This is awesome, cant wait to see how your full collection will look like!

I'm amazed it doesn't crack and explode from the massive thermal difference and rapid shift of temperatures

@Narwal-oj1pr

7 жыл бұрын

Re the glass he uses is (for lack of better word) immune to thermal shock

@cullenl2508

7 жыл бұрын

Narwal10444 resistant?

@Timothy656

7 жыл бұрын

Borosilicate 3.3 glass is a wonderful thing! Quartz glassware is even better it is said you can heat it up to 1000 degrees celsius and dip it into ice cold water and it wont crack or break. However, it's 10x the cost of borosilicate 3.3 :(

Hey Cody, awesome video as usual. Encasing the tubes in acrylic. Genius! Safe and functional. I wanted to request you do some gases that change color when their state changes. Example. Chlorine gas(dangerous) is green, but liquid chlorine is clear(i think). Also gaseous oxygen is clear, but liquid oxygen is pale blue. There may be others with even better color changes. It would be interesting to watch the state change along with the color. Also interesting to use color as indicator of state. If you had a bunch of these of tubes with known temperatures of state change, you could arrange them to make a fairly neat visual thermometer.

@sbreheny

6 жыл бұрын

Liquid chlorine is yellow-green.

@GarryDumblowski

6 жыл бұрын

This would be incredibly hard to get into the right state, but if you're looking for something with a fantastic color change as it changes between liquid and gaseous states. diatomic sulfur should be your friend. Problem is, diatomic sulfur would be a special case; as you probably know, at STP it's more favorable for sulfur to take on it's solid S8 allotrope, so to get it to a gas, you would actually need to DEpressurize it inside that tube, which may result in stable gaseous S8 instead of S2, and I don't believe that displays the characteristic violet color. Even still, it would be cool to have one of these tubes contain a solid and a gas at equilibrium instead of a liquid and a gas at equilibrium. (though there are probably better materials to do this with than sulfur, actually just plain old water might be good for that... never mind, you'd have to keep the temperature below it's triple point temperature, so i guess i'll look for another substance)

@oitthegroit1297

5 жыл бұрын

Nitrogen dioxide, when cooled, changes color. Maybe it might do the same thing with pressure? (I wouldn't want THAT to explode...)

@oitthegroit1297

5 жыл бұрын

And also what about bromine? Just curious.

@maxmccormick3376

5 жыл бұрын

Liquid chlorine is amber-yellow, i can say this definitively because i've made it myself. I have photos if you'd like to see them.

Nice score on the nitrous tank. I'm looking forward to your Cody's beekeeping on whippits series.

Yep, the sound quality has gone up a lot! Very nice. Thank you whoever funded it =)

im not sure how you audience age range works because i dont know if its youngish or older bt im 14 and find you videos very entertaining and awesome and i dont know if thats weird because im 14 but ooh well

@imjays5120

7 жыл бұрын

Gold Solitude nice

@thebugcast

7 жыл бұрын

Same here!

@nickdonaho8422

7 жыл бұрын

I'm only 11

@trime-time

7 жыл бұрын

IM Jays watching Cody's videos is a good thing! try to learn as much about the science and I can promise you that later in life you will be very glad you did.

@TheBlapSurgeon

7 жыл бұрын

Yeah and you can impress your friends with how much you know about the world and science and stuff! Knowledge is power, after all

They remind me of Fortress of Solitude crystals.

dude, you are an amazing scientist! I like your lab equipment and all the tools at the ranch, it looks like a lot of fun!

the audio sounds great. learning a lot. keep up the good work!

Where can I buy one of these? I want to give one to my chemistry professor.

new mic sounds good!

I like your videos, they're extreme... I remember one video you did with bees and your face was all swollen.. good times... keep up the good work

Great video Cody, nice job !

Is it possible to store gaseous gold in a glass tube at standard temperature and pressure. I've always wanted to see and hold gaseous gold.

@theCodyReeder

7 жыл бұрын

Holding it might be difficult... I have seen it though, it is a reddish purple color.

@insanitycubed8832

7 жыл бұрын

***** Thanks for the imput, I thought it might be difficult, but I'll still try and find a way. It would be really cool to have some gold in a gaseous state.

@insanitycubed8832

7 жыл бұрын

***** I was just thinking to get it to a really high pressure in a containor of sorts until it is gas and then keep it at that pressure.

@hobbified

7 жыл бұрын

Adding pressure won't make it a gas - in fact, just the opposite. It will make it stay solid at high temperatures where it would normally melt.

@insanitycubed8832

7 жыл бұрын

hobbified derp I meant low forgive me for derping out.

There are two types of people: - people who think of "laughing gas" when they hear N2O - people who think of Nitrous Oxidide used in race cars when they hear N2O

@Quethonable

7 жыл бұрын

JC_mcsR53 *3 People 1- think of laughing gas 2- think of cars 3- think of liquid fuel for missiles and rockets

@jcmartinez7527

7 жыл бұрын

Macdeas yes. My bad. Lol

@theCodyReeder

7 жыл бұрын

There are those that hear laughing gas and think of rocket fuel. ;)

@jcmartinez7527

7 жыл бұрын

***** yes, like Macdeas​ said. Haha. Sorry, I'm more of a car guy. Lol

@anilrehmatullah7906

7 жыл бұрын

totally could tell u got nitrous high on that intake

excellent work Cody. Good explanation.

Its super nice to see everything thats come from the patreon. Wish i had money to donate.