SeaDoo RXTX Rotax 4tec Race Engine Build for Pump Gas + How to Install a Calas Cam DYI + Tech Tips
Today we will begin the Stage 3 Sea-Doo Rotax Engine Build for the 2021 Sea-Doo RXT-X. In this Motor Build Episode, I will show you how to Install the Calas Performance Camshaft and Provide you Some tech tips that could help you, so you can save your money and your time.
If you haven't seen the Previous Video of this RXT-X Motor Tear down be sure to check it out here
kzread.info/dash/bejne/nmVs0ZmNg6TMp84.html
Be sure to check out The Calas Performance Tunes. Available now on www.calasperformance.com/
or email us at CalasPerformance@gmail.com
Lets see wha happen!
Be sure to follow me on
IG -0 calasperformance
FB - CalasPerformance
Check out my Website
Calas Performance www.calasperformance.com/
Check out DDR Performance
ddrperformance.com
Check out the fizzle factory
www.fizzlefactory.com/
#calasperformance
#seadoo
#rotax
#jetski
#jetpump
Director/Video Editor/Producer/Drone Pilot/
Dessie Vizcaino
Пікірлер: 65
I just bought my first jetski (seadoo gti 130) and I love watching your videos.
The Master at seadoo engine builds.............................................................................Fort Worth,Tx
11:36 love the glovebox cover cut and drawn on to look like “The Mask” on the wall lol
The best !!!
Glad to hear that your business and KZread Channel is growing. You do a great job of showing how to do these things with Sea-Doo's
As always Great video ! I wish that was my motor 👍🏼 greetings from Austin Texas 🇨🇱 Sea Doo Life 😊
The light💪🏻
Where do you order all the parts for seadoo’s
I've rebuilt maybe 75 engines over the years, and one thing I always do is Plasticgauge the main, and rod bearings before I close it up. I've had so many machine shops screw up my cranks, and cylinder specs for new pistons. And I used a couple top race engine building shops all over the country, and they still screw up things. I don't trust anybody's machining work these days.
faaaa master class !! grande ernesto !!
You make the most informative videos, as a technician my self it’s awesome!! I wish our Canadian dollar wasn’t so low in value I would love to buy our camshaft and your other parts
Very good and very informative. I absolutely love all the tech Tips on all your videos. I always learn something on every video you post. Thank you Calas. Aka Sea-Doo Master!
Merci!
There is a lot of good detailed info in this video! Keep up the good work, my friend!
Another fantastic video Thank You
Please make a video on how to install a cam, and springs with the motor in from start to finish
Ernesto love your channel thankyou for sharing with us
Thank you for this 👍🏻👍🏻
Super odcinek
I can watch engine build videos all day. Great job and explaining it very clearly. Love the channel. ❤
🤩🤩thanks for all you great work,happy for you channel and business doing great 😊. Any yamaha re-build in the future.
@jesusmelo1472
10 ай бұрын
?
@calasworld
10 ай бұрын
Absolutely as the channel grows, we are going to do different projects
Thank you sir !
Tremendo contenido siempre!! 🎉🎉🎉
Thanks Ernesto as always, love your videos
Love the content. And as always, it is very informative. Keep the videos coming.
Gracias por tus videos me encantan mucho 🙏💪💪💪
17:32 people will still try to argue that timing is “retard”. Thanks for pointing that out to people!
It looks almost identical to building a SeaDoo 1503 engine
Vous pouvez mettre les sous titres en français s'il vous plaît ? Merci
But, while the GTX Limited stand with its luxury features and accessories , the RXT - X is designed for performance .
OK. All nice looking BUT what about a NikaSil surface ? It is all gone ,,, so this engine will work but for how long ???
The camshaft does have bearings; they are called plain bearings.
I am building a 2011 RXT 260. I am using the same Wiseco Pistons. Do you have any recommendations for ring end gaps size or should I say Tolerance.? Or should I go by manufacturer tolerances? Your input would be greatly appreciated.. I've learned a lot from you in this present build, and I'm doing. Thank you again, and i look forward to your response. Keep up the good work.
Niceeeeee!!!
What is the part number for those Wiseco pistons? Are they 100mm that are for the 1503 engines and 8.4:1?
Hola Ernesto, tengo dos rxpx 300 uno es 2022 y el otro 2023, tienen muy pocaas horas de uso, menos de 15 cada uno, pero no llegan sin cerca a la velocidad que dicen en internet, como vivo en colombia no les he podido hacer el reset del aciete, pero a las 10 horas se los cambie, sera que la falta del oil reset los esta afectando en la velocidad final,,, gracias
how much oil do you put into the engine? after doing the engine swap?
Also do you have a website where we can contact you for work?
@DessiLu14
10 ай бұрын
Links are in the description.
@calasworld
10 ай бұрын
Contact me at Calasperformance@gmail.com Also links are in the description.
Thank you for all your video's. Really do appreciate it. Where do you get all your arp bolt stuff from?any info would be great thank you
@calasworld
Ай бұрын
I have everything in stock
@calasworld
Ай бұрын
I will be putting ARP and more new products in calasperformance soon
what's your opinion Ernesto? Bolts that come in carrillo rods or install arp bolts in the rods
@calasworld
9 ай бұрын
The Carrillo rods bolts of really good I will not change them
nice video! do i need new springs and retainers for the cam?
@DessiLu14
10 ай бұрын
Oh YES. DEFINITELY
@calasworld
10 ай бұрын
For calascam yes I highly recommend it
Hello, please tell me, I bought the block head, apparently it was overheated, as you said, the shaft on the last neck bites a little, what is your opinion, will it work? Thanks
@calasworld
10 ай бұрын
It’s funny you ask that my first Seadoo 07 Rxp was like that and it ran 93 mph back on 2013 you’ll be fine
hello i have a 2002 gtx 4tec limited ran great. then one day i put the key to the post and i got one long beep. checked the fuse box and found 5amp fuse bad. replaced it but as soon as i put the key to the post it pops and i get one long beep. any info you have about this problem would be great. thanks
@calasworld
10 ай бұрын
Go on GreenHaulk website www.greenhulk.net/ and I’m sure they have an answer for you in the forums
Avez vous un mail ? Je voudrait vous contacté. Merci
Any spare engines Ernesto?
@calasworld
2 ай бұрын
Never there’s always a new project that is an engine🤦♂️🤣😂
@ferdinanddiran8535
2 ай бұрын
@@calasworld hahah Yeaa I bet. I enjoy every single project you be putting out there. 🫶🏻
Valve cover bolts = 140 ft pounds lol not this guy
@DessiLu14
10 ай бұрын
Noo. Lmfaoooo
@calasworld
10 ай бұрын
🤦♂️
Do u prefer factor rocker arm bolts over ARP? I see you didnt use arp for those
@calasworld
10 ай бұрын
There’s a reason why the seadoo engineers design a bolt that is skinny in the middle so the oil can reach the rockers the ARP bolts that I seen are fat I just don’t like them, if ARP comes out with a bolt that looks like the factory one then I use it.
@fredericosanchez5318
10 ай бұрын
Makes sense. I rather have more oil on the head for race applications. Factory bolts are strong enough.