Awesome video thank you!

And you always start a jetski first before you turn on the water or you will hydrolock the motor

😢 Does the oil injector move with the throttle. What makes the injector move. I just installed carb & cables. The throttle operates great however the injector is not spring loaded & doesn’t move with the throttle cable. Does it move only when the engine is running? Thanks.

💪🏻💪🏻💪🏻

You didn't check your Popoff pressure and also you have to change your fuel selector valve because the stock ones are not designed for ethanol fuel

And don't forget to do a fuel pressure check or it will run great until it fries the back cylinder

@codyowen9504

Жыл бұрын

How do you do that? Also lol been watching lots of videos you’re in every 2 stroke seadoo comment section

good morning and congratulations for your videos. I ask you to know how the carburettor booster pump of the Rotax 787 works. Thanks. yuri from Italy

Hello, very interesting video. I have 2 Mikuni 38 carbs on my Kawa jet ski. I changed nozzles and gaskets, cleaned everything.... I put transparent hoses to see the fuel. Problem after filling the hoses with a syringe, the engine runs but the gasoline does not arrive (see the little that remains tends to go back to the tank (no suction to the carbs)? I connected the fuel correctly carburetor according to the plan (intake, return, low engine pump)? I tested the pressure for opening nozzle 19 psi THANKS A LOT

Some people use some kind goo assembly grease on the gaskets when rebuild. Do you do that?

Hey pal, I have the exact same set of Skies, need some help on the one the last person that worked the one dropped the starter bolts down in the hull or lost them completely. Maybe you have an extra set

Where are you located I need my carbs rebuilt

Hello, can you servixe a ski for me? I need a carb rebuild on mine. 1997 Kawasaki 1100 zxi

Interesanti 0:18