I've bought a cam500 and I need to install it on my laser. Thanks for this tutorial, I'll try 🙂🙏🏻 I hope to manage 😅

Very informative video and great camera!

@SCULPFUNReal

11 ай бұрын

Thank you!!

Looks great. Will be watching it again once I get one

@SCULPFUNReal

11 ай бұрын

😉

@Austeration

11 ай бұрын

@@SCULPFUNReal I'd love to be an influencer for Sculpfun. I applied but never heard anything back

wow, every second of this video is worth watching, I loved how it can be used to make timelapse😊

@SCULPFUNReal

11 ай бұрын

😘😘😘

@user-hl9pi6lu1n

11 ай бұрын

After switching the resolution in the camera settings, you can use Ctrl+C, and there is no need to manually input in the later settings

well i had to put the limit switch back on for the camera and this gives so much troubels is there a options to use the camera without the limit swiich

It looks like it's possible to also use a regular digital camera/web cam- would I be correct to assume this? I do plan to get this kit here once I have a bit of extra Money, it looks way more convenient than any home solution I would put together. Also, does this cover the full size of the expansion kit work area (900x900mm)? If not can it be custom extended to sit higher and give a wider viewing area?

I have the extended work do u all have a video to help me please I wanna buy this asap

hi, i bought a sculpfun 500 and i mounted on AREA extention kit S30 (950*410). i installed the camere near the mother board, but i see the image in the middle of the cutting area and not in the bottom posizion (0,0). how can i do to move the image from the middle are cutting versus the origin? tx in advance

in any chance to setup your camera with the lasers without limit switch?

wow excellent video very well explained😮

@SCULPFUNReal

11 ай бұрын

😆😆😆

How do I enable the crosshair in the camera as you do? is there a different program for this other than Lightburn?

do we really need to buy the limit switch? is this not appicable to s9 without the limit switch?

Saludos estos videos de configuración por favor los pueden subtitular al español gracias

@5:18 the camera is already at the center after some adjustments...but soon after we are instructed to adjust the height to within 325-330mm wich brings the camera out of the center... what gives?

how come nobody says anything about the enclosure for the laser? most of us use laser enclosures and the camera won't fit inside

4:00 please help, i have bought sculpfun s30 pro and sculpfun cam. i followed this step by step instalation tutorial and got problem that the maximum area collides with the engraving machine frame, and there is an annoying sound when it hits the right frame. how to fix it?

@SCULPFUNReal

10 ай бұрын

3:48 Modify the parameters in the red box， The working size of S30Pro in the video is 383 * 375, which is incorrect. In fact, it is 381 * 375. If the position of your limit switch is different from what I installed, then you need to measure it yourself.

only think i get is patern not found trying more then 50 times now

Is there a version of this device planned that works with the extended work area?

@SCULPFUNReal

11 ай бұрын

Sorry maybe no.

Where is the camera software in windows?

Espero que muy pronto,salga para poder usar con el kit de expansión...

@SCULPFUNReal

11 ай бұрын

it will work with any size. Just the usable area of the camera is about 400x400. You increase it (mount the camera higher) but the quality will decrease accordingly. Use a bed size of what ever you want and take the area of 400x400 as camera enabled area.

Is there any option to calibrate and align this camera using MacBook. system camera option not coming for us. even I tried to use different focus mode but still not able to calibrate. Please reply to me. If any option is there try to upload a video for installation using MacBook. I looking for responses.

@danienteaqualcosa

7 ай бұрын

Man I solved with Obs studio on Mac last night 😎

@MyBroes

4 ай бұрын

@@danienteaqualcosa how????

Hi, i hope you can help me out. I have a S30 Ultra, wich is a 600x600mm working area and i am trying to instal my CAM500 and it captures the 400x400mm middle top of my honeycumb board but when i am about to do the camera alignment and i frame the area before i engrave, the laser frames the middle of my honeycumb board and not the top 400x400 area that the camera captures. How can i finish the installation of my camera with this problem?. Could you post a video with the callibration of the CAM500 on a laser with bigger working area that 400x400mm? Thanks for your time.

@peterbraid2975

10 ай бұрын

yes same problem here. It says suits S30 Ultra so i purchased one. No it doesn't adjust properly to work area so am going to have to modify the mounting to make it suitable. should have saved money and made my own cheaper.

@jonwtr

10 ай бұрын

@peterbraid2975 I thought it could be a problem, and surely enough it was. ... I'm using a quickly assembled extension with a few planks and will test if that works. I should have known that even though @SCULPFUNreal say it is compatible that it would extend beyond 400x400. I bought it for the elegance, now look at my Frankesteincamera ...

@user-jh1mq2ih2u

5 ай бұрын

@@jonwtrdid it work?

@jonwtr

5 ай бұрын

@@user-jh1mq2ih2u kinda. It's dumb that they didn't make it just like 10cm bigger. Haven't made a proper extension. But it holds, I wouldn't recommend. If you have to diy it anyway, one could as well just buy a high quality webcam and make a custom fixture. What's important is that the camera's position to the frame doesn't change. Otherwise it's not super accurate.

Do I have to recalibrate the camera in Lightburn everytime I work on a worpiece with different height? Or after first calibration just adjust the camera height to 330mm from camera to surface workpiece?

@SCULPFUNReal

3 ай бұрын

If the height difference is large, try to readjust the focus.

Hola, no puedo configurarlo con la sculpfun s30 ultra 600*600 graba mas abajo de donde muestra la imagen.... Alguin logró solucionarlo??

@freackclown

29 күн бұрын

En la ventana de control de cámara calibra el desfase moviendo el eje de x o eje y

Bonjour besoin d'aide . J'ai une sculpfun s30 ultra 22 watt. Du coup ma zone de travail c'est quoi que je doit mettre ? 600*600 , 400 * 400 ou bien la même qu'il mette dans la vidéo ? Cordialement

@luisgodinoibanez4021

5 ай бұрын

Bonjour mon ami, je vis la même chose, as-tu trouvé la réponse à cette question ?

Where do i find the camera software for mac

@knightkiller24

8 ай бұрын

got the same problem..please anyone help us

@danienteaqualcosa

7 ай бұрын

Men I solved with Obs studio on Mac last night 😎

Is it possible to use this on s30 600X600 frame ?

@freackclown

29 күн бұрын

Si pero solo puedes usar 400x400

04:47 how does it work with a macbook?

@danienteaqualcosa

7 ай бұрын

Man I solved with Obs studio on Mac last night 😎

👍👍👍👍

No limit Switch for the S30 - Ultra Series? Help.

@SCULPFUNReal

11 ай бұрын

S30 - Ultra Series has limit switch in the package. Don't worry.

hello..im using imac and im stuck at minute 4:47, i cant find where the system camera if using mac facetime wont show the camera grid please..anyone can help me

@danienteaqualcosa

7 ай бұрын

Man I solved with Obs studio on Mac last night 😎

Salve, io ho un macbook pro come faccio ad impostare la griglia sulla cam. Sono bloccato su questo passaggio. Grazie

@SCULPFUNReal

8 ай бұрын

Please send email to our after-sales, we need to send you a picture:support@sculpfun.com

@danienteaqualcosa

7 ай бұрын

Ciao Dario, non sono riuscito neanche io con una griglia vera e propria, ma ho risolto con Obs studio ieri sera 😎

Супер! Настройка жуть какая долгая, но девайс классный )

@SCULPFUNReal

11 ай бұрын

😊😘

I wish I was more tech savvy

1- You must have a L-Shape feet to bolt and mount to the workbench 2- You must have spaces (aluminum) around the honeycomb + L-shape to also fasten the honeycomb. Either you provide the L-Shapes braces + screws or replace the legs for everyone who wants this (extra cost).. Otherwise, it will not be accurate when its moved! 3- What about the enclosure? It will be blocked.. So you should also have a solution to use the camera with it too... It will be easier to add the camera to the enclosure by changing the height and location of the frame braces. 4- Add LED for better picture and capture options 5- You may need to suggest and add USB Bridge because some old notebooks have only 2 USBs- Mouse, Laser, and now Camera!

@SCULPFUNReal

11 ай бұрын

You don't need to fix the engraving machine. After the camera completes the Calibrate Camera Alignment, the engraving machine can be moved. You need to ensure that the camera is not moved in its position on the engraving machine

@danienteaqualcosa

8 ай бұрын

3- build your own enclusure at the right height for the camera, like me 😉

@iq0099

8 ай бұрын

@@SCULPFUNReal Actually, the camera + camera 2020 bars are screwed to the frame very very well, and after I off the machine and- the next day, the camera is not aligned!

Help not working voor ultra 30 600x600?

@luisgodinoibanez4021

5 ай бұрын

Hello friend, I am going through the same thing, have you found the solution for this?

@freackclown

28 күн бұрын

Si funciona pero solo enfoca 400x400

❤🎉

@SCULPFUNReal

11 ай бұрын

Hola, alguien sabe cómo configurar la cam 500 para un área del la sculp fun de 600x600mm ? Por más que lo intento, es imposible Gracias

@bubuRdm

7 ай бұрын

Tengo el mismo problema. lograste solucionarlo?

@freackclown

28 күн бұрын

Lo máximo que enfoca en 400x400

Bit of a shame you have to instal limit switches. Or, really, the S9 should come with them. But still, I've got one on pre-order.

@thelabby9998

9 ай бұрын

Agreed… these are a PITA in their own. I’m still figuring out altogether…

Kinda scary to see hhe amount of unanswered comments here, i guess I'll just have to order one and see whats up so people can get some answers 😅

I bought this camera months ago and watched every video especially this one, spent many hours many days calibrating and trying absolutely everything in detail in this video and still can't get accuracy. The company won't ever reply to me so I cannot recommend this product.

@freackclown

28 күн бұрын

Graba desfasado? O cual es el problema?

I can't get the capture right

@SCULPFUNReal

11 ай бұрын

where are you stuck？

@peterwall1984

10 ай бұрын

@@SCULPFUNReal it's not talking the capture,

I just acquired a S30 Ultra-22W Laser and the CAM500, the laser has a 600x600 mm work area, but guess what ? the camera frame-arm is just 35cm, so when i home the laser to 0,0 limit the center of the working area can´t be reached by the camera arm so it´s imposible to configure it. You should specify that this camera is only for smaller frames or replace to all the owners of the camera with frames bigger a new arm or refund our money. Oh and if you use MAC OS you can´t configure it because there isn´t any app that can move the bright or contrast of the camera and display grids as the video (believe me i just downloaded 10 different app and no one has this functions) and even if any app has the functions the width of the arm would never reach the center of the working area. Awful

@arnaudlabonne265

9 ай бұрын

Thanks for the information. I was going to make the same mistakes as you. Buy the ultra 33w and use it with a mac 😮‍💨

@manishkumarsingh1717

8 ай бұрын

Did you got any other option for alignment using MacBook???

@user-jh1mq2ih2u

5 ай бұрын

The camera functionality is a software issues when it comes to control settings like brightness and darkness not the camera itself and yes they should disclose that it won’t work on the ultra models as far detecting the whole bed

@andreyaleks3970

Ай бұрын

That's meen iOS,and Mac is suck😂

@EneOe

Ай бұрын

@@andreyaleks3970 no, the cam & software sucks.

Too fast for me.

Nice video.. just to fast..

@SCULPFUNReal

10 ай бұрын

Check it here: diode-laser-wiki.com/documentation/extras/#Camera_usage

for all Mac users: I've probably solved with OBS studio and McGiver Mode 😎

@danienteaqualcosa

7 ай бұрын

Ok, I solved. The camera is working

@oscareduardolunabarber22

6 ай бұрын

Hola ¿con qué opción habilitaste el gris en OBS studio?

@oscareduardolunabarber22

6 ай бұрын

Hello which option did you use to enable the grids in OBS studio?

@danienteaqualcosa

6 ай бұрын

@@oscareduardolunabarber22 no grid in obs, I draw the center in the center of the laptop’s lcd, with some paper tape on it

Way too fast, had to rewatch 100 times, not to mention he put the camera upside down

Terrible instructions

Eine der schlechtesten Erklärungen auf KZread

Why is the language in Windows 11 Must be in Chinese, I can't read (when opening the camera in Windows)