Hi I just seen you on Antiques road trip here in Scotland as soon as I seen the love spoon s I thought to my self if it was your family work shop and it was good see on TV nice one

@DailovespoonsThomas

7 ай бұрын

Hi David, hope you enjoyed seeing our work on the television. Thanks again for supporting our KZread channel. All the very best from us all here at The Lovespoon Workshop. 👍

Thank you. I'm relatively new to scroll sawing and appreciate your instruction. Am also amazed at how easily you were able to do the scroll work using a straight blade. Well done.

@DailovespoonsThomas

Жыл бұрын

Hi Sherwood, great to hear from you. Delighted to hear that the video was useful. I prefer working with reverse tooth blades and my favourite blade is the Niqua speed number 9 reverse tooth blade. Pegas and flying dutchman also make the same blade. Thanks for supporting our KZread channel. All the very best from us all. 👍👍

I was listening the whole time, but I cannot lie, I liked the way you cut that piece. Well done on both ends, the cutting and the oral explanations provided Dai.

@DailovespoonsThomas

2 жыл бұрын

Hope it proves useful. It took a few goes at doing the voice over on that one, so hopefully it gives an insight into the process and method we use for cutting out on the scroll saw. Thanks again for the positive feedback and supporting our KZread channel. All the best from us all. 👍👍

Thank you!

Thank you just watched your video. I’m just started and there are some great tips. I also subscribed!

@DailovespoonsThomas

6 ай бұрын

Thanks for subscribing. Hope the videos prove useful. Hope you enjoy learning to make things with the scroll saw too. It's a great machine to work with. Thanks again for supporting our KZread channel. All the very best from us all. 👍

Love the close up of this, very useful info!

@DailovespoonsThomas

2 жыл бұрын

Hi, great to hear from you as always. Delighted to hear that the video was useful. Thank you for continuing to support our KZread channel. All the best from us all here at The Lovespoon Workshop. 👍👍

Very useful. Thank you very much.

@DailovespoonsThomas

2 жыл бұрын

Hi Peter, Delighted to hear that it is useful, that is the reason we share our videos with everyone. Thank you for the positive feedback and supporting our KZread channel. All the best from us all here at The Lovespoon Workshop. 👍👍

Beautiful work and lovely commentary.

@DailovespoonsThomas

Жыл бұрын

Thanks Terry, really appreciate the positive feedback. Thank you for supporting our KZread channel. All the very best from us all. 👍👍

Great first saw

@DailovespoonsThomas

10 ай бұрын

It's served our family business very well over the past 25+ years. Thanks for supporting our KZread channel, all the very best from us all. 👍

Thank you 🙏

@DailovespoonsThomas

Жыл бұрын

You're very welcome. Glad the video was useful. Thank you for supporting our KZread channel. All the very best from us all. 👍👍

Thank you for this ! I'm looking to buy a scroll saw and this was helpful. And, nice work on the piece !

@DailovespoonsThomas

Жыл бұрын

Hi Shawn, great to hear from you, delighted to hear that this was useful. We work with the Hegner multicut 2s, a great scroll saw to make all sorts of things with. Thanks for supporting our KZread channel, all the best from us all here at The Lovespoon Workshop. 👍👍

Brilliant video! Great skill on the piece here

@DailovespoonsThomas

2 жыл бұрын

Thank you, hopefully it will be useful for anyone who is interested in learning how to use a scroll saw. Thank you for supporting our KZread channel, all the best from us all here at The Lovespoon Workshop. 👍👍

I am going to buy this it looks really useful

@DailovespoonsThomas

Жыл бұрын

Hi Aamir, well worth investing in a scroll saw. So many different things you can make. Thank you for supporting our KZread channel. All the very best from us all. 👍👍

I just bought my first scroll saw very excited and a bit nervous to try it out.... I'm watching lots of you experienced ppl on KZread glean what I can..hopefully I'll get good at this.. 😅

@DailovespoonsThomas

7 ай бұрын

Great stuff, hope you enjoy working with the scroll saw. Let us know if you have any questions, always happy to help out. Thanks for supporting our KZread channel. All the very best from us all. 👍

Very good, thank you.

@DailovespoonsThomas

2 жыл бұрын

Hope it is useful. Thank you for the positive feedback, all the best from us all here at The Lovespoon Workshop. 👍👍

Very nice degine created,,, and very useful video Sir,, salute you,,

@DailovespoonsThomas

2 жыл бұрын

Thanks for the positive feedback, it is very much appreciated. Delighted to hear that the video was useful. Thank you for supporting our KZread channel, all the best from us all here at our family workshop in West Wales. 👍👍

that is a nice video

@DailovespoonsThomas

Жыл бұрын

Thank you, glad you enjoyed the video. Thanks for supporting our KZread channel. All the very best from us all. 👍👍

Danke

@DailovespoonsThomas

11 ай бұрын

Thanks for your our KZread channel, all the very best from us all. 👍

que excelente trabajo que haces

@DailovespoonsThomas

2 жыл бұрын

Muchas gracias Jaime, felices fiestas de todo el mundo aqui en nuestra taller en Gales. 🎄🎄✨✨⛄⛄🎅🎅

Hi guys! My nome is Francisco Rääts and Im from Brasil and I'm 60yo and a woodworking for more than 40 years but new on scroll saw, could you help me with a question? How the best height or position to work with my scroll saw? Congratulations for your amazing work, and excuse me my poor English. Big hugs to all

@DailovespoonsThomas

Жыл бұрын

Hi Riccelli, great to hear from you and thank you for your kind words. Your English is very good too. When it comes to the height of the machine we like to have it around elbow height when seated. Personal preference does play a part too. For example I prefer to be closer to the machine and use a lower chair. My father prefers to be higher up so uses a bar stool height seat, as he finds this more comfortable. Hope that helps and gives a little more insight. Thanks for supporting our KZread channel. All the very best from us all. 👍👍

Thank you for the advice on sprial cut blades I've switched to reverse blades much better

@DailovespoonsThomas

11 ай бұрын

Hope they do a good job for you Wayne. They've certainly served us well over the years. Thanks again for supporting our KZread channel, all the very best from us all. 👍

when i was young, my brother used to do something extremely similar to this but the tool was hand-held. Do you by chance know what it is called and/or do you have any videos of this craft being done with the hand-held tool? i know the name of the tool in my language - maltese - but definitely not in english nor did i come across videos using it... He was a boy at the time and many boys used to do it - we didn't have tablets or video games back then!!!! (video games had just started and nobody could afford them so children did crafts. Boys with wood, girls with knitting! 30 years ago...)

@DailovespoonsThomas

6 ай бұрын

A Coping saw or fret saw would be two hand tools that would allow you to do a similar job. Thanks for getting in touch, all the very best from us all. 👍

@Thankful2bCatholic

6 ай бұрын

@@DailovespoonsThomas thank you for that. YES!!! That is it, the second one: coping saw!!! kzread.info/dash/bejne/haGDlbJmaZrgaNI.html - in the video it is not the tool my brother used but it is hand held too. They don't teach this in malta any more and i wish they did. (It would be a good craft to teach to prisoners and they could pass time doing something useful and beautiful!)

I just bought a scroll saw but don't know how to it yet

@DailovespoonsThomas

Жыл бұрын

Hi Stan, great to hear from you. The scroll saw is a fantastic machine that will allow you to make all sorts of different items in wood. If you have any questions, feel free to ask. We have lots of different videos demonstrating the methods we use on our channel. Thank you for supporting our KZread channel. All the very best from us all. 👍👍

What's the thing that was vacuuming the dust called?

@DailovespoonsThomas

Жыл бұрын

With the Hegner scroll saw you have the blower at the top that keeps the line of sight clear as you are cutting. You also have the option of attaching a dust extractor to the machine to collect the sawdust. Thank you for getting in touch and supporting our KZread channel. All the very best from us all. 👍👍

My saw only use pin end blades. Does anybody make a round blade oin end?

@DailovespoonsThomas

Жыл бұрын

Hi Samuel, thanks for getting in touch. I use pinless blades myself. So not as familiar with the options that are available when it comes to pin end blades. Most of what is available for pinless blades is available in a pin end version too. Olson, pegas and record all make pin end blades so might be worth a look for what you want in their ranges. Thank you for supporting our KZread channel. All the very best from us all. 👍👍

How much cost the machine?

@DailovespoonsThomas

Жыл бұрын

Hi again, great to hear from you. The scroll saw we use is a Hegner Multicut 2s. To buy it new costs between £800-1200. However, you can often find them on ebay for between £250-500 second hand. You can contact Hegner for any spares required too. We have 2 of them here at our family workshop in daily use. They both work perfectly after being in daily use for 20+ years. Thanks again for supporting our KZread channel. All the very best from us all. 👍👍

Waw

@DailovespoonsThomas

2 жыл бұрын

Hi Kamal, hope the video was useful. Thanks for supporting our KZread channel. All the best from us all here at The Lovespoon Workshop. 👍👍

Great vid but gee yrs voice does my head in

@DailovespoonsThomas

Жыл бұрын

Thanks Nige, glad you enjoyed the video. Thanks for supporting our KZread channel. All the very best from us all. 👍👍

साकलासैकि मेसिन का वेलेट भेजावा छाक्त है सार आप

@DailovespoonsThomas

Жыл бұрын

Hope the video was useful, thanks for supporting our KZread channel. All the very best from us all. 👍👍

as