Today we start the long journey of scraping in our lathe. This is arguably the most important part of any machine tool reconditioning. Enjoy.
Жүктеу.....
Пікірлер: 49
@stevechambers91664 ай бұрын
Yep I liked the voice over and the way you were explaining what you were trying to achieve with out going over it again and again. thanks for your time👍👍👍
@VanoverMachineAndRepair
4 ай бұрын
Absolutely thank you
@qdean124 ай бұрын
The voice over with this content was excellent! It works great and is effective in explaining what is going on (important for me with this topic 🙂)
@VanoverMachineAndRepair
4 ай бұрын
Awesome, thank you!
@theodoreshasta78464 ай бұрын
The voice over was highly informative and much appreciated. Scraping can be difficult to watch, but in this case it moved right along thanks to your voice over. Well done!
@VanoverMachineAndRepair
4 ай бұрын
Cool that’s the hope
@horus104 ай бұрын
Good job on the voice-over. Seemed to flow very well and I am sure it's easier to add at the end than trying to keep up a running monolog👍
@VanoverMachineAndRepair
4 ай бұрын
Glad you enjoyed it
@mattholden54 ай бұрын
@Vanover Customs Great job explaining details and showing process/result. This topic is difficult to find good visual documentation for. I really appreciate you taking time to share yours.
@VanoverMachineAndRepair
4 ай бұрын
Glad it was helpful!
@jameswilliams24154 ай бұрын
Love the voiceovers!
@VanoverMachineAndRepair
4 ай бұрын
Thank you
@Thysddcf2354 ай бұрын
Liked the voiceover
@VanoverMachineAndRepair
4 ай бұрын
Thank you
@carlbyington51854 ай бұрын
I wanted to mention, how you channeled, relieved the back of your homemade scraping blades, was very innovative for flex (very, very, non-lazy, LOL) having a much better day today :)
@VanoverMachineAndRepair
4 ай бұрын
lol no worries all good. Thanks for sharing
@ianleuchars80324 ай бұрын
liked the voice over!
@VanoverMachineAndRepair
4 ай бұрын
Thank you
@chronokoks4 ай бұрын
Get or make some precision stones. With them you don't need to oil/lubricate the surface (you can't actually otherwise the stones won't work properly and will stick) when stoning the scraped surface. Makes things easier, faster and cleaner + you see polished high spots immediately.
@VanoverMachineAndRepair
4 ай бұрын
👍
@Julian.Heinrich4 ай бұрын
Enjoyed this; thanks for sharing
@VanoverMachineAndRepair
4 ай бұрын
Absolutely
@terryberggren91244 ай бұрын
The voice over was just fine a great way to explain things while you are not doing them
@VanoverMachineAndRepair
4 ай бұрын
Thanks for your reply
@Eric-vq9nq4 ай бұрын
Voice over works well. Doing the intro your regular way then switching to voice over seems like a good way to do it. I imagine it's a lot less time consuming to get work done when you don't have to explain every step as you go.
@VanoverMachineAndRepair
4 ай бұрын
Yeah trouble is I did explain I just decided to voice over and redo the explanations. The voice over probably added 8 additional hours of work compared to normal
@craigguinn54234 ай бұрын
Liked the voice over with just scraping mixed in. I’d heard of scraping, but never seen it done.
@VanoverMachineAndRepair
4 ай бұрын
Glad you enjoyed it
@piteralvarado10284 ай бұрын
Amigo siempre e tenido la curiosidad de Aprender de rectificar las bancada del carro manual es que quiero comprar un torno y eso que tú arreglas tiene mucho desgaste pero bueno aún Nolo tengo amigo está muy buena la técnica 🙏👍
@VanoverMachineAndRepair
4 ай бұрын
I appreciate it
@stevecrawford12384 ай бұрын
I thought the voice over was fine. Very meticulous process explained very well.
@VanoverMachineAndRepair
4 ай бұрын
I appreciate it
@annacalise83364 ай бұрын
I thought the voice over was very well done, you honestly don't even realize it's a voice over, very well done, I like the scraping but Im really looking forward to getting back to making some chips, it's been a while lol
@VanoverMachineAndRepair
4 ай бұрын
I agree about the chips we got 20-25 videos already filmed lots of machining ahead just trying to jamb out this backlog
@annacalise8336
4 ай бұрын
@@VanoverMachineAndRepair Yeah I'm sure, I enjoy all your videos so I'm really looking forward to seeing you make some chips again soon, thank you for all the work and effort you put into your content, it's greatly appreciated!
@VanoverMachineAndRepair
4 ай бұрын
@@annacalise8336 absolutely. There are some great machining only videos in the pipeline that will be some fun ones. Those are my favorite jobs to do, film, edit, and watch.
@scottgilliam75244 ай бұрын
Great video the voice over was fine in my opinion but we all know what they say about opinions.
@VanoverMachineAndRepair
4 ай бұрын
Good to hear
@col2lin4 ай бұрын
I take it that you are in touch with Josh Topper, His friend near him is closing down & there is a sale comming off in May. If you don't know about it get in touch with him, however if you are then you know all about the sale, there could be some parts you might want.
@VanoverMachineAndRepair
4 ай бұрын
Yeah I am, I watched the video as well. Thanks for the heads up though
@pawekowalski74692 ай бұрын
👍
@VanoverMachineAndRepair
2 ай бұрын
👍
@Trainwreck11234 ай бұрын
I'm in the process of building a new workshop from scratch and wondering if you could give some suggestions of where you look when you're trying to buy a new machine. Appreciate your content!
@VanoverMachineAndRepair
4 ай бұрын
Yeah I am out of town till Thursday. Give me a call 847-890-9969 or shoot me an email Vanovercustoms@gmail.com
@artemiasalina18604 ай бұрын
I think the voice-over works well for footage of a long monotonous process where you're hustling through it but still want to keep the audience up to speed on what you're doing. I think if you stick to that formula and you find yourself doing a lot of voice-overs then it might indicate that you have too much hustling footage. Really nice scraping work on that top slide.
@VanoverMachineAndRepair
4 ай бұрын
Ok great points
@BrianRousseau27 күн бұрын
You keep saying "ironically" to describe non-ironic conditions. I am not convinced you know what that term means... unless you are using it ironically.
Пікірлер: 49
Yep I liked the voice over and the way you were explaining what you were trying to achieve with out going over it again and again. thanks for your time👍👍👍
@VanoverMachineAndRepair
4 ай бұрын
Absolutely thank you
The voice over with this content was excellent! It works great and is effective in explaining what is going on (important for me with this topic 🙂)
@VanoverMachineAndRepair
4 ай бұрын
Awesome, thank you!
The voice over was highly informative and much appreciated. Scraping can be difficult to watch, but in this case it moved right along thanks to your voice over. Well done!
@VanoverMachineAndRepair
4 ай бұрын
Cool that’s the hope
Good job on the voice-over. Seemed to flow very well and I am sure it's easier to add at the end than trying to keep up a running monolog👍
@VanoverMachineAndRepair
4 ай бұрын
Glad you enjoyed it
@Vanover Customs Great job explaining details and showing process/result. This topic is difficult to find good visual documentation for. I really appreciate you taking time to share yours.
@VanoverMachineAndRepair
4 ай бұрын
Glad it was helpful!
Love the voiceovers!
@VanoverMachineAndRepair
4 ай бұрын
Thank you
Liked the voiceover
@VanoverMachineAndRepair
4 ай бұрын
Thank you
I wanted to mention, how you channeled, relieved the back of your homemade scraping blades, was very innovative for flex (very, very, non-lazy, LOL) having a much better day today :)
@VanoverMachineAndRepair
4 ай бұрын
lol no worries all good. Thanks for sharing
liked the voice over!
@VanoverMachineAndRepair
4 ай бұрын
Thank you
Get or make some precision stones. With them you don't need to oil/lubricate the surface (you can't actually otherwise the stones won't work properly and will stick) when stoning the scraped surface. Makes things easier, faster and cleaner + you see polished high spots immediately.
@VanoverMachineAndRepair
4 ай бұрын
👍
Enjoyed this; thanks for sharing
@VanoverMachineAndRepair
4 ай бұрын
Absolutely
The voice over was just fine a great way to explain things while you are not doing them
@VanoverMachineAndRepair
4 ай бұрын
Thanks for your reply
Voice over works well. Doing the intro your regular way then switching to voice over seems like a good way to do it. I imagine it's a lot less time consuming to get work done when you don't have to explain every step as you go.
@VanoverMachineAndRepair
4 ай бұрын
Yeah trouble is I did explain I just decided to voice over and redo the explanations. The voice over probably added 8 additional hours of work compared to normal
Liked the voice over with just scraping mixed in. I’d heard of scraping, but never seen it done.
@VanoverMachineAndRepair
4 ай бұрын
Glad you enjoyed it
Amigo siempre e tenido la curiosidad de Aprender de rectificar las bancada del carro manual es que quiero comprar un torno y eso que tú arreglas tiene mucho desgaste pero bueno aún Nolo tengo amigo está muy buena la técnica 🙏👍
@VanoverMachineAndRepair
4 ай бұрын
I appreciate it
I thought the voice over was fine. Very meticulous process explained very well.
@VanoverMachineAndRepair
4 ай бұрын
I appreciate it
I thought the voice over was very well done, you honestly don't even realize it's a voice over, very well done, I like the scraping but Im really looking forward to getting back to making some chips, it's been a while lol
@VanoverMachineAndRepair
4 ай бұрын
I agree about the chips we got 20-25 videos already filmed lots of machining ahead just trying to jamb out this backlog
@annacalise8336
4 ай бұрын
@@VanoverMachineAndRepair Yeah I'm sure, I enjoy all your videos so I'm really looking forward to seeing you make some chips again soon, thank you for all the work and effort you put into your content, it's greatly appreciated!
@VanoverMachineAndRepair
4 ай бұрын
@@annacalise8336 absolutely. There are some great machining only videos in the pipeline that will be some fun ones. Those are my favorite jobs to do, film, edit, and watch.
Great video the voice over was fine in my opinion but we all know what they say about opinions.
@VanoverMachineAndRepair
4 ай бұрын
Good to hear
I take it that you are in touch with Josh Topper, His friend near him is closing down & there is a sale comming off in May. If you don't know about it get in touch with him, however if you are then you know all about the sale, there could be some parts you might want.
@VanoverMachineAndRepair
4 ай бұрын
Yeah I am, I watched the video as well. Thanks for the heads up though
👍
@VanoverMachineAndRepair
2 ай бұрын
👍
I'm in the process of building a new workshop from scratch and wondering if you could give some suggestions of where you look when you're trying to buy a new machine. Appreciate your content!
@VanoverMachineAndRepair
4 ай бұрын
Yeah I am out of town till Thursday. Give me a call 847-890-9969 or shoot me an email Vanovercustoms@gmail.com
I think the voice-over works well for footage of a long monotonous process where you're hustling through it but still want to keep the audience up to speed on what you're doing. I think if you stick to that formula and you find yourself doing a lot of voice-overs then it might indicate that you have too much hustling footage. Really nice scraping work on that top slide.
@VanoverMachineAndRepair
4 ай бұрын
Ok great points
You keep saying "ironically" to describe non-ironic conditions. I am not convinced you know what that term means... unless you are using it ironically.
@VanoverMachineAndRepair
26 күн бұрын
Exactly