Honestly the bubbles don't even look bad, gives it a cool texture. If I didn't see the rest of the video and just saw that I would have assumed it was all intentional, reminds me of a shipwreck underwater with bubbles coming up out of the ship or something, your videos are incredible!

@GitaraMaker

2 жыл бұрын

Thank you @Nightwishmaster. I also saw some KZreadrs who's into resin art and some of their fail looks really good, just like some of the works of Nerdforge or Bobby Duke.

@y007p3

Жыл бұрын

The bubbles give off a kind of glow from the sides of the wood. Gives a kind of cool, ethereal look.

Wood + Epoxy like fender final fantasy ,cool guitar 👍

Wonderful work and great result with a lovely sound. A unique instrument.

@GitaraMaker

6 ай бұрын

Thank you!

A really good build.. A masterpiece.

The bubbles and cracks give it character. Amazing job and design.

@GitaraMaker

Жыл бұрын

Thanks @Ding Dong!

Stunning...amazing job

Super sick love the design

Just incredible ! A guitar worthy of the Gods

Absolutely gorgeous build great job keep the videos coming

@GitaraMaker

Жыл бұрын

Thank you!

Bloody amazing.👏👏

Ang ganda naman ..mahusay ka gitara maker

stunning build

Cool project

Beautiful

Masterpiece 👍

I enjoyed this video so much! You have a ton of talent brother. And the guitar is BEAUTIFUL! 👍💜

This looks great!

I wouldn’t have covered it after pouring the resin. You would’ve seen the bubbles forming and they could’ve been removed with a torch :) I like how the build turned out though 😀

@watahyahknow

2 ай бұрын

that mightve worked though some of the bubbling was around the wood as the open cellstructure had some air trapped inside and that was pretty deep under the resin , those are harder to remove

looks pretty good, I don't mind the epoxy imperfections, it adds character. I'd replace your pickups in a heartbeat, but that goes for most fenders/gibsons too

Awesome work! this is art

That sound from a home made pick ups amazing👍

@GitaraMaker

Жыл бұрын

Thanks!

Grabe, ang galing 👏❤

Nice 👍 i want that ❤️

Nice!

Your an awesome Craftsman and Artist Sir.... More Power!....

@GitaraMaker

Жыл бұрын

Thanks!

super sound from this guitar !

Your really are amazing , next level creativity .

@GitaraMaker

2 жыл бұрын

Thanks!

Great work and I like the sound.Bravo!

@GitaraMaker

Жыл бұрын

Thank you!

Very nice..

beautiful

🤘 great

Wow, very cool video! Turned out great, and you have some amazing tools, jigs, and skills!

@GitaraMaker

Жыл бұрын

Thanks @OnTheFritz602! Glad you liked it.

Awesome 👏👏👏👏

@GitaraMaker

Жыл бұрын

Thanks!

Maganda pa rin. Good job!

@GitaraMaker

2 жыл бұрын

Salamat po!

Amo tus guitaras son hermosas😍😍😍😍😍👍👍

Most excellent!

@GitaraMaker

2 жыл бұрын

Thanks!

Good job 👏 👍

Perfect

Awesome job mate from how the body came out the cracks look like scars and add character

@GitaraMaker

Жыл бұрын

Thanks @JEMLICK! That's also the feedback I got from one of my friends.

I can tell that you've never done this before, 😆 😉 😜 I am just barely able to shape and cut a nut blank. God bless that talent. 🙏

Beautifuulll... 😍😍❤️

Good job, I like the finish 👏🏻

@GitaraMaker

2 жыл бұрын

Thanks!

Muito perfeito ❣️❣️❣️👋👋❤️❤️❤️❤️❤️❤️❤️❤️❤️

Hermosa una belleza

Good job man, it looks great! 😀

@GitaraMaker

Жыл бұрын

Thanks!

Subscribed!!!! hahahahaha

@GitaraMaker

2 жыл бұрын

Salamat Justin!

La guitarra más hermosa

You can make one just like jimmy page doble guitar.......this is a great idea

*Awesome 😃🙋🏻‍♂️👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷*

Nice song for audio testing, I feel it ❤️

@GitaraMaker

2 жыл бұрын

Thanks! That's my daughter's favorite song.

@albertizonluzuriaga3797

2 жыл бұрын

Because of your video, that's my favourite song too right now. I'm looking forward to your guitar projects. They are very awesome.

Parang gusto ko tuloy mag ipon para mag pagawa sayo ng ganyan sir🤗

Honestly a very nice guitar! My only nitpicks are don't wrap strings around locking tuners (13:42) and do not melt your solder wire on your iron instead of the copper (11:25 and 13:30). Oh and great playing btw :)

You Fender neck guys are so much more efficient with wood, you were able to get two necks. I would've only got one neck out of that piece because I need that 17 degree break angle so it'll snap the first time I set it down a little too hard and if i can do that in one piece without using a scarf joint, even better.

Freaking rad man!!

Verrycool

Led guitare 🎸👏👏👏👏👏

Makes my les paul silverburst custom look dull......Great job friend 🇬🇧 🏴󠁧󠁢󠁥󠁮󠁧󠁿 👍

you coil your own pick ups? wow! your videos are very satisfying sir! love the cnc parts. new sub here!

@GitaraMaker

Жыл бұрын

Thanks for your support!

Amazing skills! Telecaster maybe? Sg? Keep up the great work😎👍🏼

@GitaraMaker

11 ай бұрын

Thanks!

I'm sure you hated that the epoxy set up wrong But I think it adds a lot of character and certainly doesn't effect the sound or playability any Congrats on another guitar I would love to play

@GitaraMaker

2 жыл бұрын

100% I debated myself not to continue with this, but curiosity pushed me to finish it. Yup, it still sound nice.

@notmyname3681

Жыл бұрын

Gives the wood a cool 'trapped under water' vibe to me. Sounds lovely as well!

Yun oh may bagong upload! 😃

@GitaraMaker

2 жыл бұрын

Dapat nung Sunday pa ito na-upload, daming naging technical issue hehe Thanks Benny!

@bennyyyg

2 жыл бұрын

Naenjoy ko pa din Kuya Marlon, balanced yung BG music at natural sound nung mga tools mo sa pag gawa ng guitar. Parang gusto ko tuloy magpagawa ng custom telecaster haha!

Класная футболка от мистера биста!

I would have used bronze mica powder or copper mica powder to add color to the body. Still nice build.

❤️❤️❤️

hey that columbdrill spindlesander isnt a bad idea ...... btw i seen people use a spinle sander to make that part where the hradstock goes intoo the topnut , makes it nice and rounded maibe you need to paint the wood with verry thin resin and let it dry before adding it in the mould think the matt finish looks good , it makes the stratocaster shap vissible from a distance if someones playing the instrument , think having it fully seethrough would show as someone playing a weird shaped piece of wood so even if it wasnt intended to become matt/opaque i think it worked out fine , might put in some thing in the clear resin to make it at least semi transparent on the next try , maibe you can get some cluodyness in there like mist rolling over a cliff another option would be to make the wood intoo a kindof rough latticework stratocarter shaped ring and cast resin in the center of it

I've never seen a failure look so amazing! Love the texture and framing of the shots too. Very cinematic. Is that a new camera? Music and captions look very professional. I don't even notice the bubbles anymore.

@GitaraMaker

2 жыл бұрын

Thank you for lending me your Sony a6000 for the B-Roll and thumbnail 💗

May I ask what caused the cracks and bubbles? You mentioned “sealing the edges”, do you mean of the wood form? Did air come from the pours of the wood?

sir pwede po ba magpagawa sa inyo ng custom electric guitar .?

Galing talaga lods... Parang niluto mo pa yung pick ups mo, ano yun lods? Nakita ko kasi sa other video mo hnd mo na gnwa yun yung resin pick up. Pro as usual linis pa dn labas ng pick up wlang hums.. naglagay ka pa din ba ng copper shield sa pick up? Gawa ka bamboo namn base or coconut wood maganda din cguro results nun,..

@GitaraMaker

Жыл бұрын

Thanks bro! Nilubog ko sa paraffin wax yung pick-ups para sealed and walang gaps sa loob kapag natuyo, this way di magkakaroon ng masyadong feedback. Gagawa din ako ng resin pick-up baka sa susunod na video ko. Thanks sa suggestions, kapag nagkaroon siguro ako ng access sa mga materials na yan itry ko. Thanks!

Wood expands with moisture.

Still epico

@GitaraMaker

2 жыл бұрын

Are you Davie? 😂

if you do this again add a colour to the resin a nice galaxy resin or a sea blue with white swerled in

@GitaraMaker

Жыл бұрын

Yes I love the sea blue color, I'm experimenting with that color making miniature guitars.

Do you have any video of the diy CNC machine?

@GitaraMaker

2 жыл бұрын

I only have 3 video clips building my CNC. I'm trying to figure out how to explain in video format how to build it, maybe show the dimensions and how everything works.

Ayos lods,magkano magpagawa lods

Grabe sir!💯💯 i was wondering magkano kaya ito hehe

@GitaraMaker

2 жыл бұрын

Thanks Neil! For now not selling bro, di ko din alam ang pricing hehe.

@neilmartalosig

2 жыл бұрын

Thank you for noticing sir!! I have been around sa work mo and promise. Gusto kong magpagawa ng bass naman🥹

Guyker tuners. I've been wondering how they are. Seemed like one of the higher end cheaper new part manufacturers.

@GitaraMaker

2 ай бұрын

Yup, better than the generic tuners, gears are very smooth to use and stays in tune for a long time. It's a decent tuner.

nice guitar build po sir!! napakaganda, ano po bang kahoy ginamit sa fretboard sir?

@GitaraMaker

2 жыл бұрын

Thanks! "Balayong" yung fretboard, nakuha ko sa friend ko.

Add LEDS in the epoxy next time

when "fail looks cool" 😁 HAHA

@GitaraMaker

2 жыл бұрын

Thanks bro!

Nice good?

Kumusta po yung binili niyo na mace bandsaw? Nakita ko review mo sa shopee.

@GitaraMaker

2 жыл бұрын

@jensaint123 maganda yung bandsaw, sulit. Naputol yung blade, kaya bumili ako ng bago.

@jensaint123

2 жыл бұрын

Thanks sir. Nice videos btw.

magkano po ba yung mga gawa nyong EG?

pecou no detalhe

mga gaano kadami sir ang ngamit na epoxy resin sa body.tia

@GitaraMaker

Жыл бұрын

Nasa 2.5 liters ang nagamit ko.

why dont you put the epoxy in a vacuum to get the bubbles out?

@GitaraMaker

2 жыл бұрын

Vacuum or a pressure pot is only for bubbles that was introduced during stirring, the bubbles here came from the wood that's not sealed. I should have sealed the wood with a thin coat of resin or sanding sealer before pouring a thick layer.

@Arman-hq1tr

2 жыл бұрын

@@GitaraMaker thank you for that, I have built guitars for years but now because of your videos I will try out a epoxy resin build. Wish me luck!

@GitaraMaker

2 жыл бұрын

We're the same, I've been building custom guitar for years and now decided to build resin guitars here on KZread. I wish you all the best, I know you can do this 😊

Can you make a guitar for me in future .

@GitaraMaker

2 жыл бұрын

Right now I'm not selling, but in the future I'll sell some that I build here.

@user-lx6qy1hb3j

2 жыл бұрын

@@GitaraMaker ok, from which country are you

@GitaraMaker

2 жыл бұрын

@@user-lx6qy1hb3j I'm from the Philippines 🇵🇭

It will be a pity if we'd forget how to make those...

hi, .. I'm one of your Filipino fans, .. I ask for help to have my own guitar and to use in the church I hope you notice and help me

Available on Amazon India?

@GitaraMaker

Жыл бұрын

Hi @F J T I'm currently not selling anything for now, but will post here on my KZread if I'll sell one. Thanks for your interest.

7:55 what is that instrument of murder?? 😁😁

@GitaraMaker

2 жыл бұрын

Sorry I haven't explained haha it's only a sanding disk for a drill, surprisingly it's very effective on a bench press, that quickly leveled the neck straight.

@madeofnapalm

2 жыл бұрын

@@GitaraMaker looks like something that can take half of your hand in a split second 😁😁

zebrano neck?

How much is it for one guitar like this?

@GitaraMaker

Жыл бұрын

Thanks for inquiring. Right now I'm not selling these guitars, I might sell some in the future. But if I have to estimate, this type of guitar might be around a $1,000.

Selling?

Can you make a guitar out of a chessboard?

@GitaraMaker

Жыл бұрын

That would be cool!

Do you sell your guitars?

How did you fail?

@GitaraMaker

2 жыл бұрын

It's the resin cracks and bubbles, I almost scratched the guitar project because of that. Resin is so expensive so I continued to finish it, maybe it might still look good in the end.

king ina lupet 😅

@ljrosello3200

Жыл бұрын

what the???

Sir can you send me a 🎸.... Please....Such a wonderful designs

A Filipino?

Good work. But the soldering that is shown at 11:25 is unfortunately very unprofessionally carried out, and can lead to loose contact and high contact resistance, and thus negatively affect the sound quality. Everything should be checked and corrected if necessary. Greetings