Thanks for posting this video. It's the only one I've seen on KZread and explains all the things to look out for when disassembling of this fine air gun. It prevents blind disassembly and will help a lot when needed. Again, thanks very much!

@barraairguns

2 жыл бұрын

you're welcome sam!

This is actually the best quality airsoft gun I’ve seen in a very long time. I have gone through some guns, but this is at the top of just being cool and quality. I went through a WE m721, KWC mac11, the colt anniversary 1911, all broke down on me which upset me again. But after getting this gun I am in awe of its quality and I am in love. Also love how you guys are doing stuff like this detailed tutorial on how to replace a major part, and a relatively easy fix too. Thank you guys so much and I will be looking forward to see what else you guys at Barra are going to make.

@barraairguns

2 жыл бұрын

thanks! we Appreciate it!

These are such great little pistols . Thanks for posting this 👍👍

26th October 2021, The World We Live In, eh! Jeeez! Anyways my friend, thankyou for this video, just replaced the seal assembly, was going to bin it and buy some other revolver, there's nothing out there that can match this! Got the rear loading shell's and great revolver for plinking and show! Respect from Scotland ✌️❤️

@barraairguns

2 жыл бұрын

thanks for the love!

thanks

@barraairguns

2 жыл бұрын

Welcome

I need to put this thing back together

@stevelevesque676

Ай бұрын

Send it to me I can do it

The ejector came flying out of the gun when my friend clicked open the barrel so now hear I am fixing it, great video on disassembly and good gun besides the ejector flying out.

@barraairguns

2 жыл бұрын

send an email to help@barraairguns.com and we can assist you

My new Barra Schofield #3 just arrived today and it is a beauty. I am looking forward to doing a lot of shooting. Seeing this video makes me wonder if replacing the seal assembly is a common thing. Should I order a couple of replacements, just in case? Also, any ideas on where I can get a holster that will hold this behemoth? Thanks.

@barraairguns

3 жыл бұрын

That's great to hear David! It's not common if you treat your gun correctly: Don't leave a CO2 loaded in your airgun when you aren't going to shoot and properly lubricate the tip of each cylinder prior to loading. This will give long seal life, and reduce the need for repairs. All real leather holsters designed to fit the original Schofield will work with the CO2 pistol.

Does opening this up to try and fix a broken part or see whats causing an issue void the warranty?

Finally a good video but I also have a question , where can you buy this gas system that you are replacing . I don't mean the gasket, but the whole

the ejector in the middle of the cylinder popped off of mine the day I bought it. any suggestions?

@barraairguns

3 жыл бұрын

The cylinder has to be removed. Open the revolver like you are going to load it. Along the top frame, you'll notice 2 pins above the cylinder, where the latch is located. These pins have to be driven out, then the cylinder can be removed. There should be a long slotted screw with a spring running through the center. If so, insert the ejector so it will sit flush with the cylinder. Tighten it in place with the long slotted screw. If the screw is missing, contact customer service for parts and/or additional help. help@barraairguns.com

Do you know where I could get a replacement spring for the hammer that is show at 2:57?

@barraairguns

2 жыл бұрын

Shoot us an email and we would be happy to get one for you! Help@barraairguns.com

where did you get the replacement valve assembly ?

@barraairguns

3 жыл бұрын

please contact customer service at help@barraairguns.com

@johnwalker8581

3 жыл бұрын

@@barraairguns No- worries - you've already helped me ! -& Thank you for staying on top it. Note !* the replacement is simple - just be careful to make sure you don't loose any of your springs during the process.

Ive been taking good care of mine and the ejector just fell out is their anywhere I could buy an ejector

@barraairguns

2 жыл бұрын

Send an email to our help desk and wed be happy to help. help@barraairguns.com

@KaydenPWilliams

2 жыл бұрын

@@barraairguns Thanks I just emailed

My schofield will randomly shoot crooked , with very little power , or both. Does anybody know if it's the barrel alignment ,or is is the co2 spring

@barraairguns

3 жыл бұрын

The timing of the cylinder is probably off. It is either defective or has become worn out over time. You may be eligible for a free fix from us if you're still within your warranty. Please contact help@barraairguns.com

@viktormartinez1405

3 жыл бұрын

@@barraairguns actually, you guys already helped me. Thank you !

So the airsoft version is 2J and the .177 airgun version is 4J. Any idea what makes the difference? Assuming the internals are the same

@nickvaneenennaam7272

Жыл бұрын

Airsoft bb's are 6mm and are a round projectile, .177 pellets are smaller and are designed to have more power.

smoeone finally recorded the tutorial video of this co2air thanks

@klaw1347

3 жыл бұрын

Can you take a video of breaking the runner thx

@barraairguns

3 жыл бұрын

@@klaw1347 We're happy to help make this video, not exactly sure what you're referring to, though. Can you give me more information about what you're hoping for?

Very good informative video and not rushed, only I'm terr8ble with stuff like that my fingers are too numb and clumsy to do all the fiddly work so l can only look on enviously at someone with skill who knows what theyre doing. Afraid its the gunsmith for my repairs lol, costly but better than me having to throw away the gun if l attempted it lol.

Can i use bb's in Pellet shells?

@barraairguns

2 жыл бұрын

no, the pellet shells are specifically designed for 177 pellets

How can I drive out the pins to remove the cylinder?

@barraairguns

3 жыл бұрын

I recommend using a brass punch and small hammer to tap them out.

@barraairguns

3 жыл бұрын

I forgot to mention that the pins drive out in one direction, so if they don't come out, flip the gun around and try driving them out from the other side.

@a.p1383

3 жыл бұрын

@@barraairguns got it, thanks

I admittedly came here to see what in the design prevented me from being able to fan the hammer, so I appreciate the high quality footage. Thank you.

@barraairguns

2 жыл бұрын

Right on!

Curious if just replacing seals why was it necessary to replace the entire valve assembly. If the valve is functioning correctly simply remove the valve assembly as you demonstrate but replace the seal at top of assemble which you show in your video and replace the seal at the co2 puncture point then reassemble. Super easy to do without added cost of the entire valve assembly if the original is functioning normal. And remember Always Use Pelgun Oil or Silicon Oil...Never Ever use Pwtrolium based lubricants I'd Does cause Premarure Wear on all moving parts it Will Also Permanently Damage the Seals Forcing a full replacement of the entire co2 Valve as demonstrated in this video which was to be replacing the seals. Did not see how to replace the seal at the co2 canister puncture point

@barraairguns

3 жыл бұрын

Most people would have a difficult time installing individual seals without it leaking afterwards, so the replacing the entire valve assembly is as close to fool proof as it gets. All seals, including the puncture seal, are replaced when the whole valve assembly is installed.

My hammer won't go forward when u pull the trigger

@ethan520_

2 жыл бұрын

I’m having the same issue did you ever figure out how to fix this?

@ciarangaming7563

2 жыл бұрын

@@ethan520_ sadly no but I thing you have to replace the big silver thing that carries the gas to the bb. And I thing it stopped working because of leaving co2 in the gun for too long

@ethan520_

2 жыл бұрын

@@ciarangaming7563 ohhhh okay. Thank you for such a quick response these guns are a pain to fix

@ciarangaming7563

2 жыл бұрын

@@ethan520_ that’s true

@barraairguns

2 жыл бұрын

sorry to hear this. if you reach out to customer service help@barraairguns.com they will gladly help you with this issue