Loveeee your video’s it helps me know my car better… I have a scat loved challengers since I was 13 bought one because I loved the way they looked but nowwwww after watching your videos I look at my car totally different 😂😂😂 Thank you!!

i was questioning myslef if i should them for my srt 392 this video got me my answer fr awsome vid dawg.

1iconicb made 419 whp in stock trim at mass acceleration motorsports. I’ve heard so many people say Longtubes are not worth it but I can say once mass installed mine and tuned it, it made over a half a second difference in the quarter mile! And I’m a heavy 4-door SP too! 👍🏼🏁

@Toro704

Жыл бұрын

100% worth it

A cam package with the stock exhaust would have got you more bang for the buck.

This wrap is so hard, If I ever go to get it done on mine definitely will go black and red 👍

You put a tune on it also. With the headers so you gained power from the tune. So basically the long tube headers were say 15 HP and tune another 15 hp. The factory shorty headers on the 6.4 are actually pretty good from factory. So I wouldn’t spend $2000 dollars on long tubes. I would just get the tune

@HorizonPaintingHawaiiLLC

8 ай бұрын

Why wouldn’t you get a tune with long tubes tho ?

@Infamous_wu13

3 ай бұрын

What if you just have too much spare money left over, should I just send it?

It’s illegal for the dealer to void your warranty for aftermarket parts. Only if that part goes bad then they won’t cover it.

I got a 1320 but I live in California Los Angeles do you know anybody here that would do the same job you’re doing to do it to yours

Great video player! I like the idea of long tube headers and hi-flow cats on my 6.1L 300 SRT8. I just don't like the cost associated with it hahaha🤑🤭😅. If I can do it for $1,500 then I'd be more inclined to entertain it😝.

@Toro704

Жыл бұрын

Agreed!

Nice gain but you don’t need kooks on a scat! I did a full build on my 1320 for around $6,000. MMX ported intake, MMX ported throttle body, JBA Ceramic coated long tubes, Cam Motion Titan 2 cam, Johnson lifters, Texas Speed CNC ported heads, protorque 3,000 stall. Car runs 11.2@121 in 2800 DA on 93. Now on E85 but no good pass because can’t hook. JBA 1 7/8 Ceramic coated headers cost me $699

@Toro704

Жыл бұрын

That’s not bad!!!

@trvphxnry7625

Жыл бұрын

How much is it pushing to the wheel?

@mrdr_392

Жыл бұрын

Kooks have the best fittment

You forgot to add dyno numbers can change drastically depending on where you live those cars that you seen do 300hp find out where there from I bet it’s somewhere hot in higher elevation and the higher end they were some where much cooler and with lower elevation. The higher the elevation the less oxygen it’s harder to breathe which means your car is working harder versus lower elevation is the exact opposite sane with weather hotter temperatures make the engine hot cooler temperatures are great for V8s

@Toro704

Жыл бұрын

Agreed

🔥🔥🔥

@Toro704

Жыл бұрын

My guy

I have a 2021 392 scat pack can I add long tube headers without a tune or anything and will they mess up my trans cause I’ve heard tuning and headers fucks up a 6.4l

@Toro704

5 ай бұрын

if you get longtubes ALWAYS do a tune or you could run pretty "lean" or "rich" as some might say and could ruin the longevity of your car

Thinking about getting long tubes. So, after I get them installed, do I NEED to get it tuned? Apologies for the dumb question.

@Toro704

3 ай бұрын

Yessir

Hey what does the oil breather do for the scat?

@Toro704

Ай бұрын

Nothing really

downpipes arent the same as longtubes. all a down pipes are is basically a catless mid pipe. and they are called down pipes because that's what u call them on a car that has a turbo.

@Toro704

Жыл бұрын

Ehhh you’re technically right but I was more referring to airflow but 100%

throw a hellcat tb and injectors on there and put it on the dyno 😉

@Toro704

Жыл бұрын

Done! Lol

@cryptocat3787

Жыл бұрын

yessir 😏

What year is your 1320 bro ? And also what size did you get for your long tube headers ?

@Toro704

18 күн бұрын

2020 1 7/8

@Yg.71112

18 күн бұрын

@@Toro704 thank you bro for replying

Someone said they vibrate loose, is that true?

@Toro704

3 ай бұрын

Hell no lol whoever told you that didn’t install them correctly or torque them

Are you going to cars n coffee tomorrow?

@Toro704

Жыл бұрын

Concord? No I’m still in Atlanta but I’ll be at the dragstrip Sunday

Dude, I’m leaving my 392 stock. It has Hotchkis suspension sway bars and springs that adds 50 hp.

@BAdbOY_SRT8

11 ай бұрын

Just got a set of Hotchkis sway bars, can't wait for Hp gains 😂

Installed my headers and my engine is misfiring

@Toro704

Жыл бұрын

Might want to take a look at seals, O2 sensors and your tune

@Race_Car2ss

Жыл бұрын

@@Toro704 didn’t tune the car yet BUT the spark plug wires are slightly touching the headers

SIX MONTHS , YOU NEVER ANSWERED MY QUESTION!!!!!!!

@Toro704

2 ай бұрын

What? Lol

@sethedelman80

2 ай бұрын

@@Toro704 I asked 6 Months Ago….. What diameter long tube headers do you recommend for a hellcat 2019???

@Toro704

2 ай бұрын

@@sethedelman80 I must have not seen the comment I had 1 7/8