Do you know if I should get the 770 80 ohm, or the 250ohm to monitor my rode podmic USB. I have my rode mic plugged into my m2 MacBook Pro, and plan to plug 250ohm headphones into the mic directly.

Thanks for the video! Cant it handle 300 ohm headphones like Sennheiser HD660S2?

Would you please make a video on nt1-a and scarlett focusrite solo 4th gen for OBS

Hey looking for a good interface to power my dt990 250ohm would you recommend these for gaming/music ? looking to get the most out my headsets audio

@aaronYoh

6 ай бұрын

i’ve heard audient interfaces can drive them pretty good. that’s what i use. the guitar preamp is kinda wonky tho, other than that it’s great

Should i buy Solo 4 or Audient id4 mk2?

I have Scarlett Solo Gen4 + sE X1S microphone + HyperX Cloud II. My main problem is im playing CSGO / COD / OSu! sounds are feels delayed. Actually not feels, its delayed with every combination / setting and driver. Second and most serious question for me. Since years i want to make music with FL / Ableton and im creating beats, mixing musics which i like style. I can't hear clear and high quality sound with this setup. When i search for fix; peoples preferring 770 pro / 990 pro with possible maximum Ohm's. What you prefer for me? I'm bored of dirty and husky sound.

I upgraded my Sennheiser headphones, sounds great, unfortunately some songs sound muck thru ur device, I need to play with the bass, maybe less or more base or treble not sure... asked th Focusrite support and the give me articules unrelated to my delema!!!I have Focusrite 2i2 Please help!!

How does the headphones get signal? I'm getting no signal with my 4i4 4th Gen

I have the DT 770 pro 250 ohms. Theyaudio is plenty loud directly from my PC (would want it to be louder), but the bass is a bit lacking. Will something like the Scarlett Solo help with this?

@wedoprods6088

4 ай бұрын

yes

can this combo (solo 4th gen + dt990 pro 250 ohm) handle max sample rate, like 192kHz?

@andysei

4 ай бұрын

Ward

Hey, if I turn the output knob all the way down, but turn the headphone knob up, will I still hear a sound in my headphones? Cause when I record my vocals, I don't want monitor speakers to be on.

@kettnercreative

6 ай бұрын

Yes!

Is this amp good enough for the dt 990 250ohms for Gaming (fps)? Thanks

Is it possible to monitor my mic with this and route my gaming audio to my seperate dac/amp? If so how would you do this?

@divacroft1034

2 ай бұрын

the the f would you need seperate dac amp if this already got it?

I was looking to get this for a podcast. When I am mic monitoring or listening thru my headsets will I be able to hear through both ears or is there some button/setting I have to use to be able to hear it through both ?

@kettnercreative

4 ай бұрын

For the scarlett solo, the direct monitoring is always stereo, you'll hear it in both ears. But if you're buying this JUST for podcasting. I would recommend you get the Vocaster One or Vocaster Two instead. I have a video coming out tomorrow showing the differences and why the Vocaster series is better for podcasting.

@chadsadventures1

4 ай бұрын

@@kettnercreative Thanks so much for the reply and the tip. I am looking at the Vocaster now.

I’m not using high impedance headphones and have my headphone knob up all the way and it’s still not loud enough. Help!

@kaybi49

7 ай бұрын

I have same problem

@soundpainter7

3 ай бұрын

please lmk if you find a fix

What about the DT990 600ohm Edition?

@griftur

2 ай бұрын

im not an expert but i think youd need a bigger audio interface for that

Would the 3rd gen solo be sufficient or will the difference be vastly noticeable?

@kettnercreative

8 ай бұрын

It’s a pretty big jump for 4th gen

@EthanWallace

23 күн бұрын

I have the third gen solo and its not enough, I am looking to replace the headphones because I love the interface for guitar

Is M-game solo loud enough for dt 990?

@kettnercreative

8 ай бұрын

I only tested the M-Game solo briefly when it launched and I remember it not working well and being very hissy.

will my scarlett 8i6 3rd gen power the beyerdynamic dt 990 pro?

@ronnielicciardi7481

9 ай бұрын

if not, which interface should i use for both my shure sm7b and beyerdynamic dt 990 pro 250ohm setup? thanks!

@kettnercreative

9 ай бұрын

The new 4th gen can do both. The Rode AI-1 is another good interface that can do both.

@ronnielicciardi7481

9 ай бұрын

@@kettnercreativeok great thanks, i use the 3rd gen now with the 990 pro 250ohm and the sound doesnt seem right. Thats why i asked

My 990 pro are not loud on my 4th gen Scarlett solo its on max

@kettnercreative

8 ай бұрын

For music listening or live monitoring?

Focusrite Scarlett SOLO 4th or rode AI-1 for bayerdynamic dt990 250ohm?

@kettnercreative

8 ай бұрын

Rode AI-1

@stewie7thst42

7 ай бұрын

Can i ask which one you bought for your dt990 250ohm. Got the same headphones and not sure what interface to buy.

They aren’t 250ohm but my DT700 Pro X sound great with my Scarlet 2i2.

@AlvaroALorite

8 ай бұрын

That's precisely why they do. If I remember correctly they are somewhere in the range of 30 ohm.

@thebigdustin

8 ай бұрын

@@AlvaroALorite 48ohm.

NOT LOUD ENOUGH DON'T BUY IT. If you %100 your pot you will atleast %40 or something and you can not hear well. I don't have any ear problems.