I was looking for a lightweight blower for my deck. kzread.infoUgkxgioZQl3J5wPGAeDINzbieKbT5qomSEx3 There are some huge trees around my house and the leaves and pods drop all over my deck. Having to move furniture around to sweep has become too big a chore. This blower was the answer. It is light enough for this 70yr old lady and powerful enough to blow all the tree droppings off my rather large deck. Thank you B&D. Be aware the cord is not included. I use a 3 prong outdoor cord 25' cord for my 12' x 20' deck. The cord retainer works very well, but don't try to pass the plug through it. That is NOT how it works. You just have to loop the cord and it works great. One of my best purchases. Very happy.

I went from reddit, to flying creations, and now I'm on leaf sucking vacuums because it's so satisfying. I love the internet.

@james-jl2ej

5 жыл бұрын

Me too

@ScagPowerEquipment - you guys need to replace the diagonal support bar with a hydraulic lift/lower mechanism on the 35hp+ models. It probably adds $400 in parts to the machine but makes it so much easier to use on the operator all day. Its the only way the larger machines, especially the 49hp Kubota option which we were thinking of buying, will compete with the larger xtreme vac and bonnell machines. If the hydraulic option is added, I could see many more municipalities buying it as well. We currently are running the 29hp machine and may add the hydraulic in ourselves this season.

Thanks for posting. Great quality products.

Where did my cat go?

I can’t stop watching

With the size of the tube so large and heavy, I wonder if one day there will be a cradle and hydraulic system to hold and aim the end of the tube.

so gratifying to watch this... id love one of these..

BIG yards! it also looks like a lot of those leaves are pre mulched too.

This is oddly satisfying.

Buy them a ice tea or something they deserve alot of credit your service is deeply appreciated thanks don't work to hard appreciate you guys job well done you should be proud ! Joe

You should always run those motors at full throttle they are built to do so

@ScagPowerEquipment

3 жыл бұрын

Agreed and that is what we call out in our manuals.

seems like it does the job in a best way!

are you kidding me? that was incredible

3:47 , watch from here to end, best part of the video

They sure do! Thanks Denis!

Can you make more videos on this for the skid mount vacuum

Why could I not stop watching

can you make more videos of the 26.5 one?

Wonder how this does on rainy days?

We will if possible...Gotta wait for some rain so we can grab some more video. This was just some of the first leaf piles we found around town and wanted to get something posted as we have had a lot of requests and we have a short window to grab any real video. These loaders will devour the wet stuff.

Horrible for the operator's back. And the round nozzle is optimized for throughput, but makes it inefficient in covering ground. How about a half moon shape with the flat part to the ground? Maybe guided parallel to the ground with a linkage built on the truck? Would reduce the worker's strain to moving the nozzle horizontally. Easy for me to say of course, but hopefully it gives you further ideas.

Is it just me or do you hate it when they leave pieces of debris behind? Such a powerful machine that you're demonstrating and you're leaving debris behind!!! buyers look at stuff like that FYI...

@ScagPowerEquipment

7 жыл бұрын

We did make sure to get everything prior to leaving the spot! This happened to be more for the purpose of R&D testing and the marketing team tagged along to catch a good video opportunity.

@user-md3gn7dc6p

5 жыл бұрын

Here I am about the same that my grandfather needs to retire

Can you do a vid of the scag push blower

We have one of these at my job. How do you get the thing to not blow waaaay too hard out the outtake? Nothing stays in the truck, you could stand 40 feet away and near get blown over just from the air.

We are heading out today (hopefully....weather permitting) to grab some blower vids! :)

That pile at 2:48 needed a skid loader with a grapple then finish with the super suck.

satisfying!

they should add a stand roller to less burden to the operator

@duelee4

9 жыл бұрын

Ruzi Shuib I build these, I agree!

@duelee4

9 жыл бұрын

Ruzi Shuib can you protype one?

The guy driving the truck has it pretty good

@ScagPowerEquipment

5 жыл бұрын

For sure the nicer job to have :)

Yes, I would like to order the lifetime free trial please...

Can they suck up mulch?

Seguridad 0 en el operario según video , mas a un no hay corte o parada visual o manillar en caso de caída del operador de emergencia . ¿quien comanda este este artilugio? .

Quanto custa um desse

What do the groundspeople normally do with the shredded leaves? I always need more leaf mould.

@tennesseewebb2651

6 жыл бұрын

Frank E Davidson they take them to the city landfill. Check with your locality because here where I live You can go get a scoop of it prettycheap

Dam that's so cool.

Take all that material, use it for worm food.. worms turn it into mulch that can be resold and worms themselves for fishing bait?

does the 26hp tow behind chop the leaves up good?

@ScagPowerEquipment

10 жыл бұрын

Yes it does. All debris goes through the 20" all steel, four blade impeller before being discharged. It depends a lot on the material, but an average debris reduction ratio is about 12:1.

The video at 2:34 shows dry leaves mixed in with a LOT of lush, wet grass. We have had a lot of rain the last few weeks, but prior to the leaves falling. So the grass is heavy and wet, but the leaves are not....yet anyway!

@mattholt9065

3 жыл бұрын

yea show me a video of yall doin that with wet leaves. i do this for aliving too and them damn wet leaves suck so bad when they get in the mix lol

@ScagPowerEquipment

3 жыл бұрын

@@mattholt9065 Still will bust through it but certainly adds a level of suck to the job :)

question? what about the small rocks it must pick up? that has to damage that machine.

@ScagPowerEquipment

8 жыл бұрын

These will collect some smaller debris such as rock and pebbles without doing too much damage. These all have a wear liner incorporated into them that can be replaced in the event to much of that type of debris is sucked up.

need skid mount videos

Welcome to another episode of "Why is this in my recommendation?"

@kosakukawajiri5007

9 ай бұрын

I miss her. 😮‍💨

lol they make it look so easy...where the wet leaves at ? lmao

Whats going on with the shoes?

@ScagPowerEquipment

5 жыл бұрын

Those are some protectors our welders will have to wear.

Hello I in the Maldives like to know from where we could purchase on unit

@ScagPowerEquipment

Жыл бұрын

Hi there, thanks for the comment. Contact us here: www.scag.com/company/contact-us/

Omg 🤤

2millon % throttle please

great

I would like to see them used with wet leaves one time

@mattholt9065

3 жыл бұрын

lol...i said tha same shit lol. the damn wet leaves can kiss my ass lol. once they get into the mix its rake and blower time lol

How much is that vacuum

@ScagPowerEquipment

3 жыл бұрын

Hi there, all of our MSRP are listed on our website. www.scag.com/product-category/truck-loaders/

Why dont you run it 100% throttle ? Thats what the real consumer would run it at. We want to see full power on the big engines !

@ScagPowerEquipment

7 жыл бұрын

Good morning German, this video was predominately for R&D testing purposes of these units. The test engineer, shown in the video, was looking at the performance at different levels of throttle.

@gulhangunal406

6 жыл бұрын

German ihh

@814chappy

6 жыл бұрын

German because it’s Briggs motor

You missed a spot!

Can I demo this?

@ScagPowerEquipment

4 жыл бұрын

Feel free to send us a DM and we'll get your info off to your local rep

They need to put a big block Chevy on there

You missed a spot

It’s quite

That thing really sucks! Pun intended! LOL

chowchills needs that

@ScagPowerEquipment

8 жыл бұрын

They are great machines. Feel free to visit your local Scag Giant-Vac dealer to see one for yourself: www.giant-vac.com/dealerlocator/viewer/blipstar.php

@sammyfox1523

8 жыл бұрын

that is to much money

@railfanjames7699

7 жыл бұрын

ScagPowerEquipment can you please tell me what is the diameter of the hose

like ssfty shoes , a pair of glouse . helmets , and the last one is mouth cover ...

@strangerstranger3514

6 жыл бұрын

you have to wear PPE.safty shoes , helmets ,gloouse , and mask also ... reply please ...

you have to wear PPE for the cleaning time ...

@ScagPowerEquipment

6 жыл бұрын

Always a great idea to keep PPE on the top of mind. This individual running the machine happens to work in our R&D Lab where it's required.

Is it good for sucking up annoying neighbourhood dogs? I was kept awake again last night by nothing but BARK BARK BARK BARK BARK BARK BARK BARK BARK BARK!

@Sara-L

6 жыл бұрын

BARK BARK BARK FWOOOMP YELP ... BARK BARK BARK

❤❤❤😢😢😢😢

My Ex-girlfriend once told me if she ever see me again she would shrink me down to ant size and used this type of vacumme clearner on me lol I could do nothing but laugh coz I'm like what that thing gonna do to me?

I use one of these to suck up all my old money.

If peoplea work alone without any second pair of hands then they tend to leave stuff behind. Another guy with a rake would move stuff on a narrower pile and thus keep things tidy. Being a customer. I would not be satisfied with most of the results shown here. Also, why isn't the nozzle on some tiny wheels if 90% of the time it is being dragged on the ground?

On my wayhometoinandinandinandin

Snuffleupagus

Наш метод экскаватором и пару человек гараздо эфективней

Who picks their lawn debris that tightly😂

@_P0tat07_

5 жыл бұрын

Packs*

pretty truth out ihououoi

sais col

G

Now thats what you call Ultra Suck..........LOL

SUCC

boy these vaccum cleaners suck

Try not to be satisfying

That SUCKS !!!

This is probably stupid would this machine suck up a small child, dangerous around children.