Very nice exhaust buddy and I like how compact it is ❤
@abudaniel6856 Жыл бұрын
Sounds amazing with DB
@Edman116 Жыл бұрын
Another excellent video, brother. I would highly recommend placing a rag in the exhaust opening so if you do drop that bolt, it won't go into the pipe.
@Arvinis1
Жыл бұрын
Yes sir thank you so much for sharing your tip I’ve really appreciate it after all we’re all trying to help our rider community here in KZread 👍🙏😘
@Edman116
Жыл бұрын
@@Arvinis1 Absolutely!
@vzmoto2476 Жыл бұрын
beautiful bike and super clean
@Arvinis1
Жыл бұрын
Thanks 😘
@scottseymour21533 ай бұрын
Thanks for the video, helpful!
@TP-zz6ud Жыл бұрын
it sound so good with db i never will get it out.
@xW3rder8 ай бұрын
Thanks man. Came here just to see how it's done so I can put it back inside 😅 Cops just stopped me and said if they get me one more time without db they will take the bike so better not risk hahah
@Arvinis1
8 ай бұрын
Are you in California?
@xW3rder
8 ай бұрын
@@Arvinis1 Italy bro 😅
@VincentTL Жыл бұрын
Thanks for the video! Very helpful. The other videos I’ve seen have a snap clip. Mine (like yours) doesn’t have a snap clip so I was wondering if the db killer could be removed. Your video showed that it can. Thanks again!!
@Arvinis1
Жыл бұрын
Anytime brother I’m glad I could help ❤️
@VincentTL
Жыл бұрын
@@Arvinis1 So I removed the db killer with the confidence I gained by watching your video. It was much easier to remove than I thought, based on your experience. And now it sounds AWESOME!! My neighbors don’t thank you. 😝…but I do!! 😊
@93ChayZ3 ай бұрын
Something people could do if they don’t want it too be too loud yet keep it reasonable just drill a few more holes in the DB Killer part and done.
@meoomar47902 ай бұрын
I would like to ask you..did you removed the cat or not? Because I ordered this exhaust on my gsxs 1000..sound looks nice without db killer I just wanna know about cat because the sound will be totally different with or without cat
@099alb3rt Жыл бұрын
Sounds amazing. Did you replace the exhaust gasket?
@Arvinis1
Жыл бұрын
Thanks no because It’s a low mileage bike and gaskets were fine
@user-ms8mf7cv1s3 ай бұрын
What is the nut torque value for installation?
@brentbelmans43492 ай бұрын
Could you specify the ouside diameter of the db killer?
@jimmytheshark86 Жыл бұрын
Nice! What mirrors?
@Arvinis1
Жыл бұрын
CRG arrow mirrors 😘
@tyreezex13 күн бұрын
Brother quick question. After having this exhaust for how long you have, did you had to do a ECU flash? If not, how did the bike end up having any problems?
@Arvinis1
13 күн бұрын
Bike was rideable after the exhaust but after flush it came alive and that’s what I recommend.
@redisodix4 ай бұрын
hello! Are you satisfied with the sc project? and is it not very loud?
@Arvinis1
4 ай бұрын
Yes I love it. It is loud but you can leave the baffle in to lower the sound. Thanks
@user-xo4ev7km3r Жыл бұрын
how long did you wait for your exhaust bro?
@Arvinis1
Жыл бұрын
About 5 weeks
@moowykx250 Жыл бұрын
Just installed my s1 and there is no way I'm riding without the db killer lol
@2wheelskingz
Жыл бұрын
ok. karen
@omaronroad Жыл бұрын
No offense intended, is your exhaust installed correctly? it seems to be a bit closer to the pump
@Arvinis1
Жыл бұрын
Ok I checked everything and also took some pictures and emailed it to SC Project and they said everything seems ok and I can always raise the foot pegs a little bit if the exhaust is touching the pegs which in my case does not, I know it doesn't sound right but I've checked a few other videos and theirs were same. Now I have a plan to open it up and just add one more washer to the bolt in the middle of the exhaust pipe and see if that will add a little bit more room to my system, if everything worked out I'll definitely share it with everyone, again thanks and enjoy riding that beautiful MT-09 ❤
@omaronroad
Жыл бұрын
@@Arvinis1 thank you!
@marsdiamond2 күн бұрын
I have the S1 on my ZX10R without the db killer. I would like one. Would you be willing to sell me yours?
@Arvinis1
2 күн бұрын
Sorry I use it sometimes. Thx
@Jnlix_Cvstrx Жыл бұрын
Something sounded wrong like a rattle w/o the db killer
@Arvinis1
Жыл бұрын
Probably when I put it back in there I didn’t tighten the screw up so db killer was loose and started rattling
Пікірлер: 40
Very nice exhaust buddy and I like how compact it is ❤
Sounds amazing with DB
Another excellent video, brother. I would highly recommend placing a rag in the exhaust opening so if you do drop that bolt, it won't go into the pipe.
@Arvinis1
Жыл бұрын
Yes sir thank you so much for sharing your tip I’ve really appreciate it after all we’re all trying to help our rider community here in KZread 👍🙏😘
@Edman116
Жыл бұрын
@@Arvinis1 Absolutely!
beautiful bike and super clean
@Arvinis1
Жыл бұрын
Thanks 😘
Thanks for the video, helpful!
it sound so good with db i never will get it out.
Thanks man. Came here just to see how it's done so I can put it back inside 😅 Cops just stopped me and said if they get me one more time without db they will take the bike so better not risk hahah
@Arvinis1
8 ай бұрын
Are you in California?
@xW3rder
8 ай бұрын
@@Arvinis1 Italy bro 😅
Thanks for the video! Very helpful. The other videos I’ve seen have a snap clip. Mine (like yours) doesn’t have a snap clip so I was wondering if the db killer could be removed. Your video showed that it can. Thanks again!!
@Arvinis1
Жыл бұрын
Anytime brother I’m glad I could help ❤️
@VincentTL
Жыл бұрын
@@Arvinis1 So I removed the db killer with the confidence I gained by watching your video. It was much easier to remove than I thought, based on your experience. And now it sounds AWESOME!! My neighbors don’t thank you. 😝…but I do!! 😊
Something people could do if they don’t want it too be too loud yet keep it reasonable just drill a few more holes in the DB Killer part and done.
I would like to ask you..did you removed the cat or not? Because I ordered this exhaust on my gsxs 1000..sound looks nice without db killer I just wanna know about cat because the sound will be totally different with or without cat
Sounds amazing. Did you replace the exhaust gasket?
@Arvinis1
Жыл бұрын
Thanks no because It’s a low mileage bike and gaskets were fine
What is the nut torque value for installation?
Could you specify the ouside diameter of the db killer?
Nice! What mirrors?
@Arvinis1
Жыл бұрын
CRG arrow mirrors 😘
Brother quick question. After having this exhaust for how long you have, did you had to do a ECU flash? If not, how did the bike end up having any problems?
@Arvinis1
13 күн бұрын
Bike was rideable after the exhaust but after flush it came alive and that’s what I recommend.
hello! Are you satisfied with the sc project? and is it not very loud?
@Arvinis1
4 ай бұрын
Yes I love it. It is loud but you can leave the baffle in to lower the sound. Thanks
how long did you wait for your exhaust bro?
@Arvinis1
Жыл бұрын
About 5 weeks
Just installed my s1 and there is no way I'm riding without the db killer lol
@2wheelskingz
Жыл бұрын
ok. karen
No offense intended, is your exhaust installed correctly? it seems to be a bit closer to the pump
@Arvinis1
Жыл бұрын
Ok I checked everything and also took some pictures and emailed it to SC Project and they said everything seems ok and I can always raise the foot pegs a little bit if the exhaust is touching the pegs which in my case does not, I know it doesn't sound right but I've checked a few other videos and theirs were same. Now I have a plan to open it up and just add one more washer to the bolt in the middle of the exhaust pipe and see if that will add a little bit more room to my system, if everything worked out I'll definitely share it with everyone, again thanks and enjoy riding that beautiful MT-09 ❤
@omaronroad
Жыл бұрын
@@Arvinis1 thank you!
I have the S1 on my ZX10R without the db killer. I would like one. Would you be willing to sell me yours?
@Arvinis1
2 күн бұрын
Sorry I use it sometimes. Thx
Something sounded wrong like a rattle w/o the db killer
@Arvinis1
Жыл бұрын
Probably when I put it back in there I didn’t tighten the screw up so db killer was loose and started rattling
@lwv52
Жыл бұрын
@Alex Taylor sounds like resonance
is it full titanium?