Hi Martyn, excellent demo, I'm waiting for one of your cabinets to come in but when it does could I use a sand blasting pot for this purpose, is there any given size too big or small for this requirement? Do you have a page you could direct me to in order to set all of this up from scratch?

@Sandblasters

4 жыл бұрын

Hi Justin, Sorry for the delay in getting back to you. We have all our stock on our website www.sandblasters.co.uk

I was just wondering if I could add a pressure pot to my existing set up. I have this exact sbc990 . Any advise would be greatly appreciated

@Sandblasters

2 жыл бұрын

Hi Jody. The factory dont recommend converting a suction cabinet to pressure as they are not built to take the added pressure.

I have this same cabinet from Allsource.. Im thinking about taking the pot off it and converting it to a siphon system.. theres no way I can find a reasonable compressor to push 30cfm without buying a 4k rotary screw.. Is there a email I can contact you to ask your opion this conversion..

@Sandblasters

Жыл бұрын

Yes of course. Its info@sandblasters.co.uk

Can i ask what size nozzle you are using on these comparisons? And what psi are they being shot at? Thanks

@Sandblasters

2 жыл бұрын

Hi Tony, they'll be 6mm nozzles blasting about 80psi

@butchers2

2 жыл бұрын

@@Sandblasters silly question but to up the psi do you need to get larger air lines?? I have have no valve to adjust my psi on my cabinet or anywhere else. Im using standard workshop styles airlines to run all my setup. Im new to the business and just trying to get the best from my compressor and cabinet. Currently running 37cfm comoressor with guyson cabinet with 6mm nozzle but only blasting at 60psi? Any ideas?? Thanks

@Sandblasters

2 жыл бұрын

Hi Tony, changing airlines won't make any difference to psi only to the air flow. Ideally you want a 13mm inside diameter as a minimum to give plenty of air flow. Small airlines tend to restrict the air. As for blasting pressure 60 to 80psi is ideal usually. If you blast to high a pressure you are just smashing your media on impact, causing lots of dust and costing you money. Hope this helps Martyn

Nice I'll be buying soon hope you give me good deal

Does the pressure cabinet use less air?

@Sandblasters

3 жыл бұрын

It still requires a lot of air Joris, you want a compressor with at least 30CFM, bigger if possible

@JorisV1983

3 жыл бұрын

@@Sandblasters my compressor is around 35/40 cfm it can handle me continuously blasting with my injector blast cabinet.

@chipsammich2078

2 жыл бұрын

@@JorisV1983 what compressor do you run?

@JorisV1983

2 жыл бұрын

@@chipsammich2078 i run a Boge 4 cilinder compressor similar to this one. kzread.info/dash/bejne/a2WL26htcc6zpqw.html

What CFM is your compressor please?

@Sandblasters

4 жыл бұрын

28 Cfm for the test but I now use a 140cfm one.

@chipsammich2078

2 жыл бұрын

@@Sandblasters what brand and model compressors was the 28 cfm and the one your using now

@Sandblasters

2 жыл бұрын

@@chipsammich2078 I used a petrol Hyundai compressor. We mainly sell the Clarke compressors. They are on our website for viewing. I now use a road compressor which I run through a large dryer

@chipsammich2078

2 жыл бұрын

@@Sandblasters Yeah I'm having a hard time finding something for a home shop Electric with that high of cfm at a reasonable price..

@Sandblasters

2 жыл бұрын

@@chipsammich2078 its also what power supply you have. For instance the XE29 needs 60amps