How NOT TO break your blades while sawing! I'm sharing tips and techniques to improve your sawing skills, I hipe this video helps! :) ⭐ Enjoyed this video?? Why not check out similar ones! - Sawing tiny details in real time: kzread.info/dash/bejne/gJZrrpesnZiZhag.html - TOP 25 tools for metalsmithing at home: kzread.info/dash/bejne/mXV4rLlynK2qY9Y.html - More about sawing: kzread.info/dash/bejne/ZYSNmrybnbGtqJs.html

@asifrashid646

Жыл бұрын

V nice sister

Best tutorial Ive ever seen. Big thanks.

Another EXCELLENT video! I sawed OFF the extra metal beyond the handle on the non- "C" side of my Haymaker saw; the big bulb shape and the shape with holes in it (what were those for anyway?)!!! It's aluminum, so it can be sawed off easily and those two parts of the saw are no longer in the way, bumping into my plate, the bench, easier to draw the blade through the bench based cone lubricant, and most of all it no longer falls off my pin when I'm loading a blade, etc. I recommend this DIY saw improvement! Chris designed a gorgeous and solid saw, and now....guess what, it's STILL balanced! It's such a better saw now, and I use it all the time without cursing.

Thank you for sharing your experiences. I have learned a few things from your videos that have helped make things easier with goods results. I recently purchased the same saw blades. I am impressed 😊👏👏👏👏

@TheArtOfMetalsmithing

Жыл бұрын

I very happy to hear that! Knowing that my videos are helpful means a lot ❤️ And happy you like these blades! I was very pleased with their quality when I first tried them

I love your videos. Graceful the way you speak. Your fan from Brazil! 😉

@TheArtOfMetalsmithing

Жыл бұрын

Oh my, thank you! That's very sweet ❤️

GREATEST, I WILL CUT A WATCH MOVEMENT " THE LID" FOR EASY ALING, PIVOTS & GEARS ( AMATEUR WITH THAT'S TOOLS)🙏THANKS RALPH.

Loving your videos, I'm just starting out on the journey so all hints and tips are gratefully absorbed!

@TheArtOfMetalsmithing

Жыл бұрын

That's so wonderful! It's very exciting that you're starting out, good luck! I'm sure you'll have a lot of fun 😊 And thank you for watching my videos, I hope they will be helpful

Gorgeous and fun necklace- freaking love it!!

I love love your videos! Thank you for sharing your tips and tricks! ♡

@TheArtOfMetalsmithing

Жыл бұрын

It's my pleasure, I hope it's helpful and useful 🥰 And I'm very happy to hear that you enjoy my videos ❤️

I use rubber cement to adhere my drawings to my metal. Works well and easy to remove design when I’m finished cutting.

I needed this video! Ty for the time you take to make these!

@TheArtOfMetalsmithing

Жыл бұрын

Glad it was helpful! Thank you so much :))

Thank you SO much for this video, it’s very helpful!!! ❤️🤗❤️

@TheArtOfMetalsmithing

Жыл бұрын

I'm very happy to hear that, thank you for watching! ❤️

Beautiful video. I love it when you explain techniques.

@TheArtOfMetalsmithing

Жыл бұрын

So happy to hear that! Thank you so much for watching ❤️

Brilliant - I have just learned so much from this video which you have produced. Thank you for sharing your expertise! 🙂

@TheArtOfMetalsmithing

Жыл бұрын

My pleasure! I'm glad to hear that, and I hope other videos will be helpful too. Good luck! 🥰

I follow you all the time I am a goldsmith myself

@TheArtOfMetalsmithing

Жыл бұрын

Thank you so much for follwing and watching! I appreciate it a lot :))

Thank you for sharing your experiences 😍👍🏻

@TheArtOfMetalsmithing

Жыл бұрын

My pleasure! Thank you for watching ❤️

Thank you. Very helpful.🧡

@TheArtOfMetalsmithing

Жыл бұрын

I'm glad you think so! Thank you ❤️

Thanks❤

Omg, the Breaking Bad reference got me 🤣 awesome video Basia, thanks!!

@TheArtOfMetalsmithing

Жыл бұрын

Hahaha, I had to 😄 Thank you so much!

Dziękuję Bashia!

@TheArtOfMetalsmithing

Жыл бұрын

Cała przyjemność po mojej stronie! Thank you so much ❤️🥰

Love your videos, thankyou for sharing.i am a begining metal smith from the states who is now living in spain.what suppliers do you recommend for metal smithing in Europe. For tools for metal chemicals ect

Nice tips, also i couldn't stop staring at your pendant, it is so cute!

@TheArtOfMetalsmithing

Жыл бұрын

It is, isn't it! It's by Lisa from Bring Me My Battleaxe and she still has some in stock: bringmemybattleaxe.com/collections/battleaxe-editions I absolutely love her art and work and these are super cute and affordable wersions of her jewellery. Thanks so much for watching today!

@mariannita22

Жыл бұрын

@@TheArtOfMetalsmithing Thank you for the information, i really enjoy your content!

@TheArtOfMetalsmithing

Жыл бұрын

@@mariannita22 I'm really glad you do! I hope it's useful and helpful :))

Oh my what a necklace! 👽👽🛸🛸💜💜💜💜

@TheArtOfMetalsmithing

Жыл бұрын

It's so cool, I love it! By Lisa FROM Bring Me My Battle Axe 🥰❤️

Hey Basia! Always love your vids and learn so much! I need your help, please. I am trying to make peices from brass and the darn saw blade just keeps sliding! Even with beeswax! I'm getting nowhere fast and have many pieces to make for a show in four days!😢😢 The blades are frim Gesswein and have always been fine and the gauge is 24. Thanks, in advance, for any advice.❤

Sooo coolllll

@TheArtOfMetalsmithing

Жыл бұрын

Thanks so so much!! 🥰

💯👍👍

Can you do a video on different ways to hold things in place and at different angles to get a good solder

@TheArtOfMetalsmithing

Жыл бұрын

do you mean while soldering? Oh, I have some cool little tools and solutions to do that, I will show it in the upcoming videos :)

@daintyanns41

Жыл бұрын

@@TheArtOfMetalsmithing ty i love your videos they are the best for learning. And yes while soldering

Hiya Lady Stardust, again, I knew I'd forgotten to ask something, so; the Knew Concepts, people say they will not use it as metal dust will drop into where the blade goes and block it up. Have you had any experience of this happening at all? Stay safe, Steve xx

ok this sounds silly question but what kind of double sided tape do you use? the one I use is very thick and makes it harder to cut out a design

@TheArtOfMetalsmithing

Жыл бұрын

I found mine at a pound shop, but I've also seen it at a hardware shop and even at a craft store. It's a very thin tape and comes in various sizes (smaller or wider). I hope you'll be able to find something like this! ❤️

Hi Basia, I need to make an elevate ben peg for sawing. Please could you tell me where you got your vice from or what model it is? Many thanks.

@TheArtOfMetalsmithing

7 ай бұрын

I got it from a shop called Aldi (similar to Lidl and other chain markets). It's just a regular small bench vice, not a particular brand, with an opening of about 7cm. Many shops have them with different names and colours (I believe it's a basic tool sourced from China, that shops buy and add their branding).

@juliereid2379

7 ай бұрын

@@TheArtOfMetalsmithing many thanks Bastia for getting back to me, much appreciated:-)

I’ve just ordered the Haymaker saw frame how are you finding it to use , Hope it’s better than the adjustable steel one.

@TheArtOfMetalsmithing

Жыл бұрын

It's much better than the basic adjustable one! Absolutely. I think you'll like it a lot, I found it especially great for straight lines, circles and larger shapes, where the line has to be as even and smooth as possible. I personally think this frame is easy to control. Has a good weight and changing blades is fairly quick. Overall, a good saw frame as an upgrade from the budget one.

@simonpidgeon949

Жыл бұрын

@@TheArtOfMetalsmithing Great that’s good to know, I found the steel adjustable one gets in the way of my wrist, where the Haymaker doesn’t stick down at the back, and the Haymaker has more reach for larger work on sheets of metal 👍👍

Sorry what size do you use 2,5,8 ? Or /0 ? My English is not good enough;p btw thank you so much, your amazing 🤩

😊👍🏼💕

Hiya Lady Stardust, Great video of your tattoo, flowers? Not my name, okay not Jareks name? Oh alright, the sawing first, yes, an excellent tutorial video Dear Lady, even after all these years I learned something. You really are so very good at this you know? I like that you quoted the rules, the three teeth etc, but also shared why you use the blade size that you normally fit. Talking of fitting, very good of you to show the 'Haymaker' is it? Anyway, not the Knew with that wonderful cam action. Showing three ways of lubricating your blade was good too, simple beeswax to engineered top-of-the-line, all work, and work well so mainly taste. Rather than fingers to apply the lube and get it on my hands, I use a broken blade. I've always used Swiss blades but I keep hearing how good the blades you had are so I may just have to try them and see how easy I can break them too. Oops giving away too many secrets now... So a wonderful video, well up to your usual standard of teaching. Thank you. Now about that tattoo? Stay safe, you two, Steve xx...

@TheArtOfMetalsmithing

Жыл бұрын

Oh true! Using a q-tip is another good way to apply the blade butter onto the blade. I'm very happy that you've enjoyed the video Steve! I was testing new set up with new lights, what do you think? As for the Swiss blades, I agree, these are great too! I've been using them before I started using Nano ones, and I liked them too. Thank you so much for watching ❤️❤️❤️

@TheArtOfMetalsmithing

Жыл бұрын

Oh, as for the tattoo.. Hmm 😁 I may or may not have gotten one! Will reveal it in the near future!

@stephencoster9532

Жыл бұрын

@@TheArtOfMetalsmithingtease!!!

@stephencoster9532

Жыл бұрын

@@TheArtOfMetalsmithingthe lighting was so good I did not notice it. I'll have to watch again this time looking at the lighting and not the saws and blades. Steve...

👍😊👍

@TheArtOfMetalsmithing

Жыл бұрын

❤️❤️❤️

And I spelt Jareks name wrong again, duh... Steve...

@TheArtOfMetalsmithing

Жыл бұрын

Haha, no worries! 😁

@stephencoster9532

Жыл бұрын

@@TheArtOfMetalsmithingwho me worry? Only about breaking blades...

@TheArtOfMetalsmithing

Жыл бұрын

@@stephencoster9532 then it's decided! You will need to watch your mailbox in the following weeks 🥰

@stephencoster9532

Жыл бұрын

@@TheArtOfMetalsmithingyet more teasing... If you could send me your address for postal packages, again, you can watch yours too. To my email? Steve xxx...