SAVE SOME MONEY! CHANGE YOUR OWN BRAKE PADS

Автокөліктер мен көлік құралдары

in this 'how to' video I show you how easy it is to change your own brake pads and save yourself some money and learn something all at the same time
To see the Bendix Ultimate 4wd brake pads I used head to:
www.bendix.com.au/product-ran...
To watch the Bendix ultimate 4x4 brake upgrade kit install:
• THE ULTIMATE 4X4 BRAKE...
Follow me on:
/ azventures_australia
azventuresau...
All copyright free music from
www.epidemicsound.com

Пікірлер: 17

  • @damiengill2477
    @damiengill24773 жыл бұрын

    Thanku very much az always wanted to c that very helpful hope your job going well

  • @beauspicer5274
    @beauspicer52743 жыл бұрын

    love the videos man keep it up

  • @bjbuckley6108
    @bjbuckley61083 жыл бұрын

    A g clamp works just as good as well to push your piston back in

  • @Whizzbanga
    @Whizzbanga2 жыл бұрын

    Good video

  • @Andy_Pandy5
    @Andy_Pandy53 жыл бұрын

    Good one

  • @SHOCKcustoms
    @SHOCKcustoms3 жыл бұрын

    Bloody sweet vid legend. Hows the km3s going? I see the standard front ranger scrub is apparent. How many kms u got on these tyres bloke? Cheers

  • @julienicoll2070
    @julienicoll20703 жыл бұрын

    Bro jack stands not off your trolley jack

  • @AzventuresAustralia

    @AzventuresAustralia

    3 жыл бұрын

    Yeah got a bit lazy that day 🥴

  • @thewholls7176
    @thewholls71762 жыл бұрын

    I wonder if they will chew the discs…… I used to use “metal king” pads They absolutely ate brake discs Better yes but more expensive replacing discs all the time….. Plus squeak like hell until they are hot…..

  • @oliverdouglas9370
    @oliverdouglas93702 жыл бұрын

    Hey buddy I'm thinking bout having a crack at doin my pads in my 2013 bt50, do u have to bleed the brake system as well?

  • @AzventuresAustralia

    @AzventuresAustralia

    2 жыл бұрын

    Hey Oliver!! You shouldn’t have to, just make sure you take your reservoir cap off to release the Previn the brake lines and slowly squash the piston back in the change the pads, if you do want to bleed them, there’s a few good vids on YT on how to do it yourself which I’ve watched before that are really good

  • @oliverdouglas9370

    @oliverdouglas9370

    2 жыл бұрын

    @@AzventuresAustralia thanx for that mate

  • @robdotcom71
    @robdotcom713 жыл бұрын

    So I guess bleeding the brakes isn't done these days in more modern cars......

  • @SabotPottery
    @SabotPottery Жыл бұрын

    For your safety, please..please..please, get yourself some Jack stands. You're putting your life in the hope a low cost jack that will support you 4x4.

  • @ryanmitchell2162
    @ryanmitchell21623 жыл бұрын

    Mate love the vids but none of this was done correctly. Someone watching will follow this and crash into someone hopefully not killing anyone.

  • @AzventuresAustralia

    @AzventuresAustralia

    3 жыл бұрын

    Please tell!! I’m more than happy to learn…. I’ve done it this way a few times and had no issue

  • @ryanmitchell2162

    @ryanmitchell2162

    3 жыл бұрын

    You really should machine rotors or at least measure including run out. Slides need to be greased so they don't seize and you shouldn't push pistons back without cracking the bleeder Incase you warp the master seal on the push rod. And pump pedal when done so you have a pedal when you drive off. All good you haven't had issues I've seen many people do it this way, but alot of people are not aware of potential issues.

Келесі